Raspberry Pi 4 Model B

Pulsar33

Hello

See above
Dmesg : [ 0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1

Starting with a fresh dd of the img file, you should succeed as me.
Hope you will find what to do to boot in graphical mode.
Can't test myself until tuesday as said.

BR
Pulsar33

Aury88

hi,
no, my fresh dd didn't solve anything and still I was not able to start in console mode... stuck in the infinite boot inputs errors

Mark

In a few days I will have a Pi4 (4GB). At the moment I can run Marius' image on my Pi3 although the scaling is out (on a HDMI montor and on the 7" Pi touch screen) and it tends to freeze when the browser is run. I got a wee bit stuck until I realised "phablet" was the passcode it asked for

Pulsar33

@Aury88 :
If you used your 64GB SDcard, try a 32GB one or, after using dd, use gparted to create a 33GB partition at the end of the SDcard. This could help to break the reboot loop.
BR
Pulsar33

Pulsar33

@Mark :
What was necessary to launch the graphical interface starting from console mode, please ?
BR
Pulsar33

Aury88

in the 64GB SDcard, after using dd and adding a 33GB partition at the end of the SD Card I have the following kernel panic:

[] No filesystem could mount root, tried:
[] esxt4
[]
[] Kernel panic - not syncing: VFS: Unable to mount root fs on unknow-block(179,2)
[] CPU: 3 PID: 1 Comm:swapped/ Not tained 4.19.73-v8+ #1267
[] Hardware name: Raspberry Pi4 Model B Rev 1.1 (DT)
[] Call trace:
[]  dump_backtrace+0x0/0x178
[]  show_stack+0x24/0x30
[]  dump_stack+0x9c/0xd4
[]  panic+0x130/0x284
[]  mount_block_root+0x228/0x28c
[]  mount_root0x148/0x17c
[]  prepare_namespace+0x178/0x1c0
[] usb 1-1.4:New USB device found, idVendor=04d9,idProduct=1702, bcdDevice= 1.01
[]  kernel_init_freeable+0x328/0x3c0
[]  kernel_init+0x10/0x110
[] usb 1-1.4 : New USB device strings:Mfr=1, Product=2, SerialNumber=0
[]  ret_from_fork+0x10/0x18
[] SMP: stopping secondary CPUs
[] Kernel Offset: disabled
[] CPU features: 0x0,21806000
[] Memory Limit: none
[] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknow-block(179,2) ]---
[] mmc0: Timeout waiting for hardware cmd interrupt.
[] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[] mmc0: sdhci: Sys addr:  0x00000008 | Version:  0x00001002
[] mmc0: sdhci: Blk size:  0x00007200 | Blk cnt:  0x00000000
[] mmc0: sdhci: Argument:  0x00020000 | Trn mode: 0x00000023
[] mmc0: sdhci: Present:   0x1fff0000 | Host ctl: 0x00000017
[] mmc0: sdhci: Power:     0x0000000f | Blk gap:  0x00000080
[] mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x00000107
[] mmc0: sdhci: Timeout:   0x00000005 | Int stat: 0x00000000
[] mmc0: sdhci: Int enab:  0x03ff100b | Sig enab: 0x03ff100b
[] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[] mmc0: sdhci: Caps:      0x45ee6432 | Caps_1:   0x0000a525
[] mmc0: sdhci: Cmd:       0x00000d1a | Max curr: 0x00080008
[] mmc0: sdhci: Resp[0]:   0x00000e00 | Resp[1]:  0x01f3ff7f
[] mmc0: sdhci: Resp[2]:   0x325b5900 | Resp[3]:  0x00000900
[] mmc0: sdhci: Host ctl2: 0x00000000 
[] mmc0: sdhci: ADMA Err:  0x00000000 | ADMA Ptr: 0xded3a208
[] mmc0: sdhci: ============================================

Pulsar33

@Aury88
Woooo
Sorry, no more idea to try to help you.
When I'll be home, I'll give you the sha256sum of my image file to be sure that we have the same
Have a nice day
Pulsar33

Aury88

@Pulsar33 NP.
I sacrificed my smartphone 8GB sdcards and whit the UT image it "work". I was able to login and explore the system in console mode. but was not able to see the DE (it says unity8 is running and after restart unity8 nothing change)

Pulsar33

@Aury88
Just back home ... Fine that you were able to explore the system in console mode.
This confirm that 64GB cause problems not only in the case listed in the link above ...
I'll take some time to try graphical mode. I'll report here.

People who know how to launch the graphical mode are welcome to explain here !

BR
Pulsar33

Pulsar33

Sorry but I didn't understand how to launch the graphical user interface.
And with a console mode only, I don't see what to do with it ...
I hope someone will describe the solution.
BR
Pulsar33

Pulsar33

Hello,

Nobody (knows how) is interested in running Ubports in graphical mode on a Raspberry Pi4 ?

Have a nice day
Pulsar33

A Former User

Well I, for one, am following UT on Pi with great interest, @Pulsar33.

I'm still at the "Kernel Panic" stage though, so I can't help much. Sorry.

Pulsar33

Hello,

Thanks for your answer, @3arn0wl

To be sure that we all use the same image, here are the sha256sums of the #8 latest stable build (2019 09 25) I use :
ubuntu-touch-raspberrypi.img.gz febf1ce00e639ae469bf075bce4472b82b25a6d634a147c01d666f1d4f5033c0
ubuntu-touch-raspberrypi.img 76a47458b90702a156e6f9741b448db5e4d0e5235ec177ae4dea9224e4e7e2b5

The flashing process on my Linux Mint 19.2 Desktop :

lsblk   # the SDcard appears as /dev/sdc
umount /dev/sdc1
umount /dev/sdc2
sudo dd bs=4M if=ubuntu-touch-raspberrypi.img of=/dev/sdc status=progress

BR
Pulsar33

Pulsar33

Still no clue from the GURUs ?
Please help us to progress and launch the GUI ...
Best regards
Pulsar33

Aury88

@Pulsar33
Hi!
The unity8 log is very similar to this issue in mir-kiosk. It says there is a workaround but I don't understand what it is....we need to study it and or help from @alan_g

it seems we need to

--env-hacks MIR_MESA_KMS_DISABLE_MODESET_PROBE

when run mir/unity8 but I don't undestand how...

Aury88

also we are using an old rootfs with missing firmwares (last building image is the #8 from 24 September when the firmwares integration in the common rootfs is from 3 October )

alan_g

@Aury88 said in Raspberry Pi 4 Model B:

@Pulsar33
Hi!
The unity8 log is very similar to this issue in mir-kiosk. It says there is a workaround but I don't understand what it is....we need to study it and or help from @alan_g

it seems we need to
--env-hacks MIR_MESA_KMS_DISABLE_MODESET_PROBE
when run mir/unity8 but I don't undestand how...

That's just one way to set an environment variable.

Aury88

@alan_g sorry but I'm not so skilled about bash and linux. so excuse me for the stupid question:
I knew that environment variable had to have a value so something like

ENV_NAME=value

MIR_MESA_KMS_DISABLE_MODESET_PROBE seem only the name...what is its value? is it"true"?

alan_g

@Aury88 said in Raspberry Pi 4 Model B:

@alan_g sorry but I'm not so skilled about bash and linux. so excuse me for the stupid question:
I knew that environment variable had to have a value so something like
ENV_NAME=value
MIR_MESA_KMS_DISABLE_MODESET_PROBE seem only the name...what is its value? is it"true"?

It doesn't need a value, so "true" will be fine (as will "false").

Aury88

no, setting that as an enviroment variable didn't solved the problem... ¯\(ツ)/¯