Oneplus 3/3T

Kyrylo · 27 May 2020, 13:34

@Keneda Yes, You are right. XDA is the place to ask this kind of questions, but most of their topics is outdated 2016-17.
I hoped to find living help hoped to find living help from living people herep from living people here.
Nevertheless thanks a lot.

Keneda · 27 May 2020, 17:20

@Kyrylo
Here you will find outstanding living help for UBports ^^
Outdated topics doesn't mean people who did them are dead.
And like said @Kyrylo there is also Oneplus forums.

Here just a few people come back to androïd so very few know or did it.

A Former User · 29 May 2020, 04:54

Hi, I solved the "caller is to quite" issue on my 3t. I had simply to much dirt in the small net in front of the speaker.
Sadly it's not easy to clean. Either open the phone to clean it or take a neel and push a small hole through the left side of the net (quick but rough).

Specsx · 30 May 2020, 08:29

Is volte calls working because my network requires volte to make calls

Kyrylo · 30 May 2020, 20:36

Hello!
Trying to install!
Wiped all paritions. Everyone is ext4.
Start ubport-installer
Got error
error: Error: systemimage: Error: Error: {"error":{"killed":false,"code":1,"signal":null,"cmd":"/opt/ubports-installer/resources/app.asar.unpacked/platform-tools/linux/adb -P 5037 shell mount -a"},"stdout":"","stderr":"mount: mounting /dev/block/bootdevice/by-name/userdata on /data failed: Invalid argument"}

Any suggestions?

Kyrylo · 30 May 2020, 20:51

Still trying to do smth with it.
So may I know where is the destination of files downloaded by ubports-installer (on Ubuntu 20.04)?
Thanks in advance for respond.

Kyrylo · 30 May 2020, 22:51

Hi there!
Still trying...
When I tried to install with bootstrap checked I've got error like this.
stack trace: Error: Error: {"error":{"killed":false,"code":1,"signal":null,"cmd":"/opt/ubports-installer/resources/app.asar.unpacked/platform-tools/linux/adb -P 5037 shell mount -a"},"stdout":"","stderr":"mount: mounting /dev/block/bootdevice/by-name/userdata on /data failed: Invalid argument"}

when with bootstrap unchecked - cycled probleb with cable - "connection to device lost"

when I just

flash recovery using fastboot
reboot to recovery
adb push all that files to /cache/recovery
(
ubports-b72b1222bc6bb47f0617eb5f561b1b51513232361413ac03c31c6444a9390917.tar.xz
ubports-b72b1222bc6bb47f0617eb5f561b1b51513232361413ac03c31c6444a9390917.tar.xz.asc
device-1e5a4c6d0db154da0a83381c027e7dcb5394a23731c9ba909dae80a4604250ac.tar.xz
device-1e5a4c6d0db154da0a83381c027e7dcb5394a23731c9ba909dae80a4604250ac.tar.xz.asc
keyring-4c4e7ef380ebcfa2c31084efa199138e93bfed8fc58aa3eb06bdf75a78af9b57.tar.xz
keyring-4c4e7ef380ebcfa2c31084efa199138e93bfed8fc58aa3eb06bdf75a78af9b57.tar.xz.asc
version-312.tar.xz
version-312.tar.xz.asc
image-master.tar.xz
image-master.tar.xz.asc
image-signing.tar.xz
image-signing.tar.xz.asc
ubuntu_commandoneplus39554
)and adb reboot recovery
nothing happens
in recovery log file error cannot mount /cache/recovery/ubuntu_commandoneplus39554

Can anyone help me with problem?

gischpelino · 31 May 2020, 11:57

@Kyrylo looks like that not all partitons are ext4. May be a clean start with the device can help you. It gives you best chance to do it.

start with twrp (fastboot boot twrp)
set twrp to adb sideload mode
adb sideload the latest oxygenos 9.0.6 from oneplus support page
start the phone and make initial setup of the os
after that 'fastboot boot twrp' again
1st. wipe all partitions
2nd select wipe advanced 'change filesystem' of cache, system and data and set it to ext4
3rd wipe format data
check with twrp terminal command 'mount' that all partitions are ext4. If not change filesystem again.
connect device to usb (still in twrp) and start ubport-installer

But this is not an op3 specific question!

Kyrylo · 31 May 2020, 13:34

@gischpelino Thank You for your respond.
Already did that all a couple of times.
Wiped all partitions, formatted to ext4, checked if formatted in ext4,
(If I am not mistaken no need to install Oxygen OS to wipe all partitions in TWRP once more)
1.Tried to install with BOOTSTRAP ckeckbox enabled and disabled.
Without results.
2.Pushed all that files to /cache/recovery/ (I am not sure if it is right place).
Rebooted to recovery and ... nothing happens.
So...
Any help will be appreciated.

gischpelino · 31 May 2020, 14:25

@Kyrylo may be a firmware problem, thats what the step with oxygenos 9.0.6 is for. As far as I can read you did not do all steps.

Kyrylo · 31 May 2020, 14:30

Do you mean twrp problem?
Or you mean that I should install OOS9.0.6 then to flash again in twrp?

Specsx · 1 Jun 2020, 17:08

Can anyone please make a video about current progress of this device as i want to buy a new oneplus 3t i just wanna know its worth it or not?

ernest · 1 Jun 2020, 20:03

@Specsx As a start you can refer to : https://devices.ubuntu-touch.io/device/oneplus3t/

joe · 2 Jun 2020, 20:24

@Specsx
I made a video for the OnePlus 3:
https://www.youtube.com/watch?v=cYvLqPPf3q4

Not the same as OnePlus 3t, but pretty close...

3T_Ed · 3 Jun 2020, 06:59

@joe
Just wanted to say thank you for taking the time to make that video. It is a very comprehensive and objective one on the current status of the Oneplus 3/3T, excellent job!

joe · 3 Jun 2020, 15:02

@3T_Ed Thanks. Glad it was helpful.

soupbowl · 6 Apr 2020, 17:24

@gischpelino said in Oneplus 3/3T:

@Kyrylo looks like that not all partitons are ext4. May be a clean start with the device can help you. It gives you best chance to do it.

start with twrp (fastboot boot twrp)

set twrp to adb sideload mode

adb sideload the latest oxygenos 9.0.6 from oneplus support page

start the phone and make initial setup of the os

after that 'fastboot boot twrp' again

1st. wipe all partitions

2nd select wipe advanced 'change filesystem' of cache, system and data and set it to ext4

3rd wipe format data

check with twrp terminal command 'mount' that all partitions are ext4. If not change filesystem again.

connect device to usb (still in twrp) and start ubport-installer

But this is not an op3 specific question!

Hey, just wanted to say thank you as this helped me get past an error during the automatic installer.

Kyrylo · 6 Jun 2020, 21:12

Hi!
I have a question about USB tethering on Oneplus 3.
Internet connection works well.

In terminal I've entered commands:
$ android-gadget-service enable rndis
rndis enabled
$ sudo tethering enable
Device "rndis0" does not exist.
Error: Connection 'tethering does not exists.

Does it work at all?
Or it's a bug.
Where I should report a bug?(additional question)
Thanks in advance.

dieharddan · 7 Jun 2020, 02:12

@Kyrylo i have the Oneplus 3t and it works for me; it doesn't always show the tethering icon up top though, so it looks like it's not working maybe that's your issue?

gischpelino · 8 Jun 2020, 08:44

@soupbowl nice to hear that. Enjoy.