UBports Robot Logo UBports Forum
    • 版面
    • 最新
    • 標籤
    • 熱門
    • 使用者
    • 群組
    • 搜尋
    • 註冊
    • 登入

    Oneplus 3/3T

    已排程 已置頂 已鎖定 已移動 Oneplus 3/3T
    616 貼文 76 Posters 577.7k 瀏覽 25 Watching
    正在載入更多貼文
    • 從舊到新
    • 從新到舊
    • 最多點贊
      回覆
      • 在新貼文中回覆
      登入後回覆
      此主題已被刪除。只有擁有主題管理權限的使用者可以查看。
      • S 離線
        sven @Lakotaubp
        最後由 編輯

        @Lakotaubp Yes, I see no output from the terminal command fastboot devices.

        VollaPhone22 (dual-boot of VollaOS and UT 20.04 OTA-5), Pocophone F1 (pmOS, edge)

        LakotaubpL 1 條回覆 最後回覆 回覆 引用 0
        • poVoqP 離線
          poVoq
          最後由 poVoq 編輯

          @sven did you enable usb debugging and allow it for the specific PC via the popup that should appear on your phone's screen? Without that it will not be shown on fastboot devices.
          Ah, wait you are already on UT and want to switch versions via the installer? I think adb isn't supported on the OnePlus3 UT port so I doubt it will show up unless you have booted into fastboot already.

          Fairphone 5 (waiting for port)

          1 條回覆 最後回覆 回覆 引用 0
          • LakotaubpL 離線
            Lakotaubp @sven
            最後由 編輯

            @sven Not trying to be funny but had you rebooted to fastboot mode first. if you had try another cable just in case.

            S 1 條回覆 最後回覆 回覆 引用 0
            • S 離線
              sven @Lakotaubp
              最後由 編輯

              @Lakotaubp Booting to fastboot mode before starting ubports-installer did the trick. Thanks. Maybe a message in the start screen of ubports-installer would help ("If your device already runs some version of UT, please ...").

              VollaPhone22 (dual-boot of VollaOS and UT 20.04 OTA-5), Pocophone F1 (pmOS, edge)

              LakotaubpL 1 條回覆 最後回覆 回覆 引用 0
              • LakotaubpL 離線
                Lakotaubp @sven
                最後由 編輯

                @sven If you stuck with 0.5.3 installer there should be a new way of reporting errors (https://forums.ubports.com/topic/5008/testing-request-ubports-installer-0-5-3-beta) Or give it a try and see if it is the same on there then report it. That will probably be the quickest way.

                S 1 條回覆 最後回覆 回覆 引用 0
                • S 離線
                  sven @Lakotaubp
                  最後由 sven 編輯

                  @Lakotaubp I only worked with the new version (0.5.3 beta). I opened an issue for this: https://github.com/ubports/ubports-installer/issues/1441

                  VollaPhone22 (dual-boot of VollaOS and UT 20.04 OTA-5), Pocophone F1 (pmOS, edge)

                  D 1 條回覆 最後回覆 回覆 引用 0
                  • D 離線
                    Dnc7 @sven
                    最後由 編輯

                    Is it possible to make dual boot for this phone. I was thinking about multirom with UBports and LineageOS?

                    LakotaubpL 1 條回覆 最後回覆 回覆 引用 0
                    • LakotaubpL 離線
                      Lakotaubp @Dnc7
                      最後由 編輯

                      @Dnc7 Sorry dual boot is not supported.

                      1 條回覆 最後回覆 回覆 引用 0
                      • mymikeM 離線
                        mymike
                        最後由 編輯

                        Hi all. Is there anyone here using a oneplus 3 as its daily driver? Any issue that I need to be aware of? I'd need a new phone and the op3 could be a good candidate...

                        poVoqP A 2 條回覆 最後回覆 回覆 引用 0
                        • poVoqP 離線
                          poVoq @mymike
                          最後由 poVoq 編輯

                          @mymike Yes using it as a daily driver OTA13/Dev (probably will switch back to OTA14).

                          Compare to android the ui is a bit sluggish, but useable. I guess some issue with GPU acceleration? Also there is a strange bug with the display of the bottom edge that slightly breaks the layout of some apps. It seems to get confused with the desktop convergence mode and thus shows the bottom edge button fall-back all the time.

                          Also: the Nextcloud sync client isn't available for ARM64 in the appstore.

                          Fairphone 5 (waiting for port)

                          mymikeM 1 條回覆 最後回覆 回覆 引用 0
                          • mymikeM 離線
                            mymike @poVoq
                            最後由 編輯

                            @poVoq said in Oneplus 3/3T:

                            Compare to android the ui is a bit sluggish, but useable. I guess some issue with GPU acceleration?

                            Idk, GPU acceleration isn't mentioned in the first ports under not working features, but neither under missing...

                            Also there is a strange bug with the display of the bottom edge that slightly breaks the layout of some apps. It seems to get confused with the desktop convergence mode and thus shows the bottom edge button fall-back all the time.

                            Oh, maybe it's because of the screen size, bigger than most of other phones

                            Also: the Nextcloud sync client isn't available for ARM64 in the appstore.

                            I'm going anyway to buy and arm64 phone, I just need to decide which one...

                            D 1 條回覆 最後回覆 回覆 引用 0
                            • E 離線
                              ernest
                              最後由 編輯

                              @mymike and @poVoq for Nextcloud arm64 version, please see this post :
                              https://forums.ubports.com/topic/4903/help-with-ubsync-and-nextcloud?_=1602751456415

                              Unfortunatly, currently my life is in cardboard box, then I device to compile properly to update openstore...

                              poVoqP 1 條回覆 最後回覆 回覆 引用 1
                              • poVoqP 離線
                                poVoq @ernest
                                最後由 編輯

                                @ernest said in Oneplus 3/3T:

                                @mymike and @poVoq for Nextcloud arm64 version, please see this post :
                                https://forums.ubports.com/topic/4903/help-with-ubsync-and-nextcloud?_=1602751456415

                                Unfortunatly, currently my life is in cardboard box, then I device to compile properly to update openstore...

                                yeah I know. just wanted to mention it as it is a rather important feature for some. No worries, get your life back on track first I can totally relate.

                                Fairphone 5 (waiting for port)

                                1 條回覆 最後回覆 回覆 引用 0
                                • D 離線
                                  domubpkm @mymike
                                  最後由 編輯

                                  @mymike Have you considered the volla?
                                  It will be sent very soon. It is known that the Volla phone will benefit from long-term monitoring and is already relatively reliable now.

                                  mymikeM 1 條回覆 最後回覆 回覆 引用 0
                                  • mymikeM 離線
                                    mymike @domubpkm
                                    最後由 編輯

                                    @domubpkm No, a new phone is going to be much more expensive than a 2nd hand one

                                    1 條回覆 最後回覆 回覆 引用 0
                                    • M 離線
                                      Marcos
                                      最後由 編輯

                                      Any of you have success on sharing the screen to a TV? I tried with a LG and with a Sony but in both cases I had no success (and no clue why it failed).

                                      1 條回覆 最後回覆 回覆 引用 0
                                      • E 離線
                                        ernest
                                        最後由 編輯

                                        Anybody confident with TWRP and having an OP3 T ?

                                        I would like to try some camera lib to see if it's improving
                                        More info there : https://github.com/ubports/ubuntu-touch/issues/1528

                                        I can guide the person on Telegram if needed

                                        S 1 條回覆 最後回覆 回覆 引用 0
                                        • A 離線
                                          andybleaden @mymike
                                          最後由 andybleaden 編輯

                                          @mymike Yes I Use it right now. It is great and I think reasonably smooth on the 3T

                                          Sorted the google account downgrade which helps
                                          Sorted the camera so that works _in between upgrades
                                          I am on dev channel which is reliable

                                          Only bug I have is after setting up Twitter and Linked in they now seem to have log in errors

                                          screenshot20201111_125213975.png

                                          but I really like it on the OP3T - feels very nice to use screenshot20201111_125148230.png screenshot20201111_125124274.png ![screenshot20201111_125243698.png]

                                          I got my Nexus 4 then 5 then FP2 then one plus cooking on #UBUNTU via @ubports and have run it on Op3T Op6t OP5T Pinephone/Pro Pine Tab and Pinebook Pro and my favourite OnePlus One.

                                          A 1 條回覆 最後回覆 回覆 引用 0
                                          • S 離線
                                            Stefano @ernest
                                            最後由 編輯

                                            @ernest is that for Halium 7, right?

                                            E 1 條回覆 最後回覆 回覆 引用 0
                                            • E 離線
                                              ernest @Stefano
                                              最後由 編輯

                                              @Stefano Yes this version of lib should be for Halium 7.1 which is based on lineage 14.1.
                                              Could you try them ? If you need we could tchat on the telegram room

                                              S 1 條回覆 最後回覆 回覆 引用 0
                                              • 第一個貼文
                                                最後的貼文