[Porting] Call for Testers

thomas-k8s · 26 May 2021, 02:37

@j0e You have to flash rootfs.img(after execute that script,located in /data) into system partition.

j0e · 26 May 2021, 12:16

@thomas-k8s thanks! either i missed that on the guidel or i didn't see it! I'll do it as get back home. How about android-rootfs.img? Do I have to flash it too?

thomas-k8s · 26 May 2021, 12:24

@j0e No, I just flash rootfs.img to system partition and then it had been fixed

j0e · 26 May 2021, 21:32

@thomas-k8s thanks that worked for me too

thomas-k8s · 27 May 2021, 11:43

@j0e Great

ixsvf · 31 May 2021, 13:33

Hi,

In my street there's a shop that sells second hand devices. One of them it's the Oneplus 5t it's the 64GB/6GB RAM version around 100£.

I'm thinking of Oneplus 5t to replace my old nexus 5. It's a cheap solution for me and newer than my current device.

I'm ok with some of the bugs mentioned. Just need the basics, phone calls and sms are working fine?

Thanks for every feedback received!

thomas-k8s · 31 May 2021, 14:21

@ivo_xavier Works fine, but I got problem when I used lte network. I can receive call but incoming is impossible

ixsvf · 31 May 2021, 16:40

@thomas-k8s Thank you for your valuable input. I'm almost convinced that oneplus 5t will be my device for the years to come.

flohack · 2 Dec 2021, 16:47

@thomas-k8s yes sorry, there is generally no VoLTE in Ubuntu Touch at the moment, and its very questionable if it will every be fixed, due to custom undocumented vendor applications. All mobile phone projects outside of Android and iOS struggle with that.

Even LineageOS does not support VoLTE on all ports.

BR Florian

fool · 6 Jun 2021, 01:33

Hi, thanks for your great work! I just tried your system on my device many things working well but there's a little flaw. The things that don't work on my oneplus 5T. (OS build number 2021-06-05)

dual sim: cannot detect/config the second sim card (I want only use cellular data from first sim) and tried to call the phone number of second sim, result shows the second sim not connected to mobile network
side switch key (a switch above volume key): the key can only wake up screen. On regular android system, this key is used for switch between sound profiles (top for silence mode, medium for vibrate mode, bottom for normal mode)

flohack · 6 Jun 2021, 15:29

@fool Hi, yes sorry, the 2nd SIM is not operational now, we got some problems with that, it wont do any calls in a normal fashion anymore so we had to disable it.

For the second thing, yes, also the button is not functional, but its hard to integrate such buttons into UT, currently there is no clean way of assigning system actions to hardware buttons. That might change over time, but there is nothing planned currently. Also because nearly no current devices have such buttons.

nfsprodriver · 7 Jun 2021, 22:31

GPS is marked as working, but I can't confirm this in multiple apps. I am using cheeseburger. Sensorstatus app has greyed out ticks, so it might not be signal related.
A strange behaviour (maybe not device related), is that I disabled key sounds and vibration, but I always get a vibration first time in an application session.
Notification LEDs are controllable by the sys class links, so maybe that is helpful?
I can't enable ssh service, but as I know this is a kniwn issue for halium 9 devices.
More impressions (of course also unknown positive ones) may follow.
Great work, I love UT on OP5!!!

flohack · 8 Jun 2021, 19:08

@nfsprodriver @vince1171 confirmed GPS working after an awful lot of waiting time. Please try again under clear skies and keep the device from sleeping...

j0e · 9 Jun 2021, 21:49

I can confirm the GPS is working and it takes a while to get the position at least the first time. I used PureMaps. I am still running the first build has been published. Calls are woking fine for me both in and out and swithching audio through capsule/speaker/headphones.
The main issues i came across are just 2:
-bluetooth: i could pair my headphones but the connection is intermittant (while they're connected audio works). I couldn't pair a keybord.
-network switch: when i switch the wifi off or just go out o have to reboot the device to get mobile data working. It works fine the other way round.

Lakotaubp · 6 Dec 2021, 20:17

Anyone else with mobile data issues? I cannot enter new APN settings. Well I can enter them but they are not saved.
Edit: After a few attempts I managed to edit one marked as Contract to my settings, so at least I have basic set up.

j6 · 12 Jun 2021, 22:32

Works
Actors: Manual brightness
Actors: Torchlight
Actors: Vibration
Bluetooth: Driver loaded at startup
Bluetooth: Enable/disable and flightmode works
Bluetooth: Persistent MAC address between reboots
Bluetooth: Pairing with headset works, volume control ok (pairs fine, volume control on headset separate from phone volume)
Camera: Flashlight
Camera: Photo
Camera: Video
Camera: Switch between back and front camera
Cellular: Carrier info, signal strength
Cellular: Data connection
Cellular: Incoming, outgoing calls
Cellular: MMS in, out
Cellular: SMS in, out
Cellular: Change audio routings
Cellular: Voice in calls
Cellular: Switch connection speed between 2G/3G/4G works for all SIMs (works with my sim)
Cellular: Enable/disable mobile data and flightmode works
Endurance: Battery lifetime > 24h from 100%
GPU: Boot into UI
Misc: Battery percentage
Misc: SD card detection and access - only for devices that support it (works when connected with usbc adapter)
Misc: Shutdown / Reboot
WiFi: Driver loaded at startup
WiFi: Enable/disable and flightmode works
WiFi: Persistent MAC address between reboots
Sensors: Automatic brightness
Sensors: Fingerprint reader, register and use fingerprints (Halium 9.0 only)
Sensors: GPS
Sensors: Proximity
Sensors: Rotation
Sensors: Touchscreen
Sound: Earphones detected, volume control
Sound: Loudspeaker
Sound: Microphone
Sound: Loudspeaker volume control
USB: MTP access
sshd
apt
USB keyboard and mouse

Works but sketchy
Misc: Online charging (Green charging symbol, percentage increase in stats etc) (works but no charging symbol)
WiFi: Hotspot can be configured, switched on and off, can serve data to clients (works, doesn't show as active in quick settings when enabled from system settings, had to reboot to connect to wifi after disabling hotspot)
Libertine kinda works (doesn't show any apps as installed in system settings but I was able to install and start a gtk application after several tries).

Doesn't work
Actors: Notification LED
Cellular: Switch preferred SIM for calling and SMS - only for devices that support it (only one sim slot works)
Misc: Offline charging (Power down, connect USB cable, device should not boot to UT) (doesn't work, boots into UT)

Untested
Cellular: PIN unlock
Endurance: No reboot needed for 1 week
GPU: Hardware video decoding
Misc: Anbox patches applied to kernel
Misc: AppArmor patches applied to kernel
Misc: Recovery image builds and works
Misc: Reset to factory defaults
Misc: Wireless charging - only for devices that support it (unsupported)
(Network: NFC - disabled atm due to no middleware)
(USB: ADB access - disabled atm due to no middleware)
USB: External monitor - only for devices that support it (unsupported)

Other
At first when testing with a sim from a mnvo the APN settings were set incorrectly and mobile data didn't work. Editing the APN settings manually was a little weird as @Lakotaubp mentioned above, the changes didn't seem to stick. I didn't try to get it working for very long because using a different sim card from a different provider worked flawlessly without manual intervention.
On the first day after installing, the about page of system settings showed the last update as being on 7/3/73 (time and date were set correctly in the OS). After a day this changed to the correct installation date.
Overall I think this is awesome, it's my first experience with UT and I'm going to try to daily drive it. Thanks to everyone for all the hard work.

Lakotaubp · 13 Jun 2021, 09:26

@j6 I agree this is looking really good already. My mobile data was like yours detected incorrectly and I have now edited mms and data but new connections still not working. This is is the same on another device I noticed (but can't remember which just now, age strikes ) I do have notifications however and the button top lefthand side will put the phone into silent mode. Have yet to try vibrate on it's own. It is very quick and smooth though compared to the OP3 and has an on screen keyboard for setting up accounts, so easy now.

Lakotaubp · 14 Jun 2021, 05:39

Just out of interest does anyone have the on screen stats and 4G on the mobile signal? Noticied 3G but not 4 yet.

flohack · 25 Jun 2021, 13:23

@lakotaubp You can see only L for LTE, and yes, I had that here...

Lakotaubp · 25 Jun 2021, 13:51

@flohack Think it was more of a network thing now. It is there but not that often. Thanks