Unable to install UBports on MX4 Ubuntu edition
-
The devmode version of MDT doesn't connect to the phone either.
There must be something wrong in that adb / fastboot are not running on the phone.
Time to give up and just keep on using Cannonical UT until I get a fairphone 2 or something? -
The problem seems to be that USB isn't connecting at all. The MX4 has a notoriously bad USB connector.
You might need to try different ports or cables until you're able to find one that works. Run
dmesg -wand plug in the phone. Does anything appear indicating that*hcifound a new device? -
@UniSuperBox
ran dmesg -w
Plugged in MX4 UT device
Got
[253965.539781] usb 1-10: new high-speed USB device number 65 using xhci_hcd
[253965.703835] usb 1-10: device descriptor read/64, error -71
[253965.976791] usb 1-10: device descriptor read/64, error -71
[253966.240752] usb 1-10: new high-speed USB device number 66 using xhci_hcd
[253966.404820] usb 1-10: device descriptor read/64, error -71
[253966.672783] usb 1-10: device descriptor read/64, error -71
[253966.936735] usb 1-10: new high-speed USB device number 67 using xhci_hcd
[253971.737477] usb 1-10: Device not responding to setup address.
[253976.741015] usb 1-10: Device not responding to setup address.
[253976.948675] usb 1-10: device not accepting address 67, error -71
[253977.104558] usb 1-10: new high-speed USB device number 68 using xhci_hcd
[253981.904552] usb 1-10: Device not responding to setup address.
[253986.909068] usb 1-10: Device not responding to setup address.
[253987.116359] usb 1-10: device not accepting address 68, error -71
[253987.116387] usb usb1-port10: unable to enumerate USB devicePlugged in MX4 Flyme device
got
[254161.429876] usb 1-10: new high-speed USB device number 69 using xhci_hcd
[254161.628575] usb 1-10: New USB device found, idVendor=2a45, idProduct=2008
[254161.628579] usb 1-10: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[254161.628581] usb 1-10: Product: MX4
[254161.628583] usb 1-10: Manufacturer: Meizu
[254161.628584] usb 1-10: SerialNumber: 75UBBKN22FQPSame port same cable (MX4 Flyme device now with USB module that was in MX4 UT device)
Now what?
-
The device with Ubuntu Touch doesn't seem to be working correctly. See if you can plug it in to a USB 2.0-only port. You can also check if there's anything obstructing the pins in the port.
The goal is to have an output like your Flyme device.
-
@UniSuperBox I have tried it in a USB2 port and it was in a USB2 only port when I ran dmesg -w
The fact that I have switched the USB modules between the devices rules out an obstruction.
It must be a hardware issue past the USB port, or a software issue on the UT device.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login