BQ M10 FHD bricked upon UBport install?

Freebobjohn · 19 Dec 2017, 15:32

@dbosley
By softbricked do you mean you had the same problem as the one I have? could you still access your recovery? (I guess so if you could access the fastboot mode)
My worry is that these tools use adb or fastboot under the hood, i'll give spflash tool a try now, even just to get android back on the tablet

Marathon2422 · 19 Dec 2017, 19:35

@dbosley Check how much memory is used up by the os, (4gb) ish

tupp · 19 Dec 2017, 21:52

@Freebobjohn
I am a complete Ubports newbie, but I was in a similar sounding situation yesterday, after I interrupted the installation process on my Nexus 5. I was stuck on a screen with a Google logo with an icon of a small, open lock. I didn't see any "orange state" nor "trusted" nor "rebooting messages."

I was able to get the Nexus 5 back into the fastboot screen by running "fastboot oem unlock" in a terminal on my Antix Linux PC while the Nexus 5 was connected to it.

As I recall, I was root when I ran that command, while my Nexus 5 was turned on, displaying the stuck Google screen.

You can also try this method with your BQ M10 FHD turned off. After entering the fastboot command in the terminal, a fastboot message should appear saying, "< waiting for any device >." Then, try to press (and hold?) the various possible button combinations to get it into fastboot mode.

I tried MDT with a Lubuntu liveUSB, but I was unable to get it to work. Ubports-installer worked for me. If you use ubports-installer, make sure not to touch any of the options when "Ubports Recovery" screen appears -- it is counter intuitive, but that screen probably means that the installation is proceeding.

dbosley · 19 Dec 2017, 22:20

FreeJohn,
No, I was able to get to the screen with the Fastboot option using the volume up/power button option. it was there that I had difficulty. When I booted with just the power button, I got a screen similar to your first picture with 'ubuntu' on it.

dbosley · 19 Dec 2017, 22:25

@marathon2422 Ubuntu uses 8.4 GB on my M10. I have noticed a long boot time on it compared to the Cannonical load. Also, in case I was not clear, this is an M10 Ubuntu Edition vice Android.

Marathon2422 · 20 Dec 2017, 02:03

@dbosley looks like you could flash twrp,wipe it and reinstall ubports to get back about 4 gb

Marathon2422 · 20 Dec 2017, 02:07

@dbosley the boot time is fixed about devel r41 or 42, it should come together n the next few days when OTA 3. Is released ( you may need to keep checking,to get it)

dbosley · 20 Dec 2017, 22:42

Thank you. I'll try after some research. (I'm old and a noob.)

dbosley · 28 Dec 2017, 02:46

Marathon2422, I find Twrp for an Aquaris M10 FHD (FreezerFHD) but not for an Aquaris M10 Ubuntu Edition (Meizu). Am I missing something or should the FHD version work here as well? -Thanks in advance. Dave

Marathon2422 · 28 Dec 2017, 16:45

@dbosley No help yet,I am working away from home for a few hours
I have been using. TWRP 3.0.2.

getdroidtips.com shows using. TWRP 3.1.1

dbosley · 28 Dec 2017, 23:45

@marathon2422 Thanks. I’ll try it.

Emmelyne · 15 Feb 2018, 09:30

@freebobjohn I have exactly the same issue with my BQ M10 FHD!
Did you find a way to install UBports till december? Thanks, Emmelyne

abernator · 15 Feb 2018, 20:43

@emmelyne said in BQ M10 FHD bricked upon UBport install?:

@freebobjohn I have exactly the same issue with my BQ M10 FHD!
Did you find a way to install UBports till december? Thanks, Emmelyne

Use bq flash tool to install old UT and when that is flashed succesfully then go for UB installer.

Marathon2422 · 16 Feb 2018, 02:57

@abernator. a small tip,plug up to your PC and have the sound on,when going from the orange state to fastboot,on button and vol up,don't release the vol up,wait for a vibration,then release the on button,and wait for the fastboot screen. It may take a couple of tries,the first attempt may not do anything,( of course you have plenty of battery,even though you are cnnected to the PC ?).

Skla · 14 Jun 2018, 08:31

Hello,
At the first time,
sorry for my english
So i have the same probleme for reinstalation Ubuntn upon BQM10 FHD. J've arrived succesefuly
I arrived successfully to install in proceeding by this steps:
My BQ is connected upon my computer
My BQ is shoot down
I boot it in recovery mode in pushing OFF/ON and Volume up in the same time
So BQ is in recovery mode
I starte UBports installer and the installation go normaly.
I have a logo of ubuntu in the screen and after 5 minutes of silence... I boot in the word of linux.
Et voila !

Lakotaubp · 14 Jun 2018, 11:11

@skla Welcome aboard have a look here for more info and usfull stuff
https://ubports.com/telegram-welcome
and enjoy UBports Ubuntu Touch