After some reboots, the second sim is available.
However, when I have this sim inactive ( not using PIN to unlock), I'm not able to use the Cellular data on the primary sim.
Although data seems active, I have no internet at all ( route table is empty!).
If I reactivate the second sim, then cellular data on the primary sim is working.
Has anyone experienced this before?
thank you for the instructions.
I managed to installed the required OxygenOS image using the MSM tool and there is now audio in calls! Thank you all!
A problem I'm facing now is that the second sim ( I have two SIMs inserted) is not visible at all. I thought that only the cellular data is not working on the second SIM in this phone with UT.
Is there any way to have the second SIM working ?
thank you
thank you for the detailed explanation.
I have tested stable, rc and finally devel but with all channels I still have no sound in calls. The interesting part is that if I press some numbers in the dialpad during a call, this sound is transfered to the caller.
I have also tried to reinstall UT 20.04 stable using the ubports installer but I still have the same issue.
Before installing UT, I had installed oxygen 10.5.2 (BE83BA) by downloading the OTA image and doing a local upgrade. I will try to find a windows laptop in order to flash this image as it is listed in the supported images in the ut device page.
Do you know if there's a way to flash this image from a linux environment?
thank you
@Keneda
I had flashed oxygen OS 1.5.2 european version as it was a prerequisite in the ubports installer
@rubencarneiro
I installed the stable version and I upgraded to RC in order to check if this issue is resolved. Problem exists in both stable and RC version.
I can try downgrading back to the stable version if this will help us with debugging
@rubencarneiro please check below the pulseaudio logs after two calls (one outgoing and one incoming )
phablet@ubuntu-phablet:~$ journalctl |grep pulseaudio -A2 -B2
Aug 30 17:11:02 ubuntu-phablet org.freedesktop.Telepathy.ConnectionManager.ofono[3672]: oFonoConnection::inspectHandles ("694229xxxx")
Aug 30 17:11:02 ubuntu-phablet history-daemon[4046]: Saving account id: "ofono/ofono/ril_0"
Aug 30 17:11:02 ubuntu-phablet com.lomiri.TelephonyServiceHandler[3670]: Setting up pulseaudio for voice call
Aug 30 17:11:02 ubuntu-phablet com.lomiri.TelephonyServiceHandler[3670]: Recorded default sink: sink.primary_output default source: source.droid
Aug 30 17:11:02 ubuntu-phablet org.freedesktop.Telepathy.ConnectionManager.ofono[3672]: getContactAttributes (2) ("org.freedesktop.Telepathy.Connection.Interface.SimplePresence")
--
Aug 30 17:11:19 ubuntu-phablet media-hub-server[3570]: PulseAudio event for sink with index 1 received.
Aug 30 17:11:19 ubuntu-phablet com.lomiri.TelephonyServiceHandler[3670]: Setting PulseAudio source 'source.droid' port 'input-builtin_mic'
Aug 30 17:11:19 ubuntu-phablet com.lomiri.TelephonyServiceHandler[3670]: Restoring pulseaudio previous state
Aug 30 17:11:19 ubuntu-phablet com.lomiri.TelephonyServiceHandler[3670]: Restoring PulseAudio default sink to 'sink.primary_output'
Aug 30 17:11:19 ubuntu-phablet com.lomiri.TelephonyServiceHandler[3670]: PulseAudio audio mode changed: 0x4
Aug 30 17:12:22 ubuntu-phablet media-hub-server[3570]: media-hub: Got call started signal, pausing all multimedia sessions
Aug 30 17:12:22 ubuntu-phablet history-daemon[4046]: Saving account id: "ofono/ofono/ril_0"
Aug 30 17:12:22 ubuntu-phablet com.lomiri.TelephonyServiceHandler[3670]: Setting up pulseaudio for voice call
Aug 30 17:12:22 ubuntu-phablet com.lomiri.TelephonyServiceHandler[3670]: Recorded default sink: sink.primary_output default source: source.droid
Aug 30 17:12:22 ubuntu-phablet com.lomiri.TelephonyServiceHandler[3670]: Found card that supports voicecall: 'droid_card.primary'
--
Aug 30 17:12:34 ubuntu-phablet media-hub-server[3570]: media-hub: Connection state for port changed to: 0
Aug 30 17:12:34 ubuntu-phablet media-hub-server[3570]: PulseAudio sink details for sink.primary_output with index 1 is available:
Aug 30 17:12:34 ubuntu-phablet com.lomiri.TelephonyServiceHandler[3670]: Restoring pulseaudio previous state
Aug 30 17:12:34 ubuntu-phablet com.lomiri.TelephonyServiceHandler[3670]: PulseAudio audio mode changed: 0x4
Aug 30 17:12:34 ubuntu-phablet com.lomiri.TelephonyServiceHandler[3670]: Restoring PulseAudio default sink to 'sink.primary_output'
Some logs from the dialer-app in case it helps:
0 10:51:56 ubuntu-phablet dialer-app[4963]: qml: Starting a call to (694) 229-xxxx
Aug 30 10:51:57 ubuntu-phablet dialer-app[4963]: void CallEntry::onCallStateChanged(Tp::CallState) 3
Aug 30 10:52:15 ubuntu-phablet dialer-app[4963]: void CallEntry::onCallStateChanged(Tp::CallState) 6
Aug 30 10:52:15 ubuntu-phablet dialer-app[4963]: void CallManager::onCallEnded()
Aug 30 10:54:27 ubuntu-phablet dialer-app[4963]: QObject::startTimer: Timers cannot be started from another thread
Aug 30 11:33:19 ubuntu-phablet dialer-app[4963]: manager set to: "galera"
Aug 30 11:33:23 ubuntu-phablet dialer-app[4963]: QObject::killTimer: Timers cannot be stopped from another thread
Aug 30 11:33:23 ubuntu-phablet dialer-app[4963]: QObject::startTimer: Timers cannot be started from another thread
Aug 30 12:22:49 ubuntu-phablet dialer-app[4963]: qml: Starting a call to (697) 377-xxxx
Aug 30 12:22:49 ubuntu-phablet dialer-app[4963]: void CallEntry::onCallStateChanged(Tp::CallState) 3
Aug 30 12:22:50 ubuntu-phablet dialer-app[4963]: [PERFORMANCE]: Last frame took 38 ms to render.
Aug 30 12:23:06 ubuntu-phablet dialer-app[4963]: QObject::killTimer: Timers cannot be stopped from another thread
Aug 30 12:23:06 ubuntu-phablet dialer-app[4963]: QObject::startTimer: Timers cannot be started from another thread
Aug 30 12:24:27 ubuntu-phablet dialer-app[4963]: void CallEntry::onCallStateChanged(Tp::CallState) 4
Aug 30 12:24:27 ubuntu-phablet dialer-app[4963]: void CallEntry::onCallStateChanged(Tp::CallState) 5
Aug 30 12:24:27 ubuntu-phablet dialer-app[4963]: void CallEntry::onCallStateChanged(Tp::CallState) 6
Aug 30 12:24:27 ubuntu-phablet dialer-app[4963]: void CallManager::onCallEnded()
Aug 30 12:24:27 ubuntu-phablet dialer-app[4963]: qt.qpa.mirclient: Attempted to deliver an event to a non-existent window, ignoring.
Aug 30 12:24:27 ubuntu-phablet dialer-app[4963]: qt.qpa.mirclient: Attempted to deliver an event to a non-existent window, ignoring.
Aug 30 12:24:27 ubuntu-phablet dialer-app[4963]: qt.qpa.mirclient: Attempted to deliver an event to a non-existent window, ignoring.
Aug 30 12:24:28 ubuntu-phablet lomiri[3702]: [2024-08-30:12:24:28.182] qtmir.sessions: TaskController::onSessionStopping - sessionName=dialer-app
Aug 30 12:24:28 ubuntu-phablet systemd[2360]: lomiri-app-launch--application-legacy--dialer-app--.service: Succeeded.
Aug 30 12:24:28 ubuntu-phablet lomiri[3702]: [2024-08-30:12:24:28.384] ApplicationManager::onProcessStopped reports stop of appId= "dialer-app" which AppMan is not managing, ignoring the event
Aug 30 13:55:35 ubuntu-phablet systemd[2410]: Started lomiri-app-launch--application-legacy--dialer-app--.service.
Aug 30 13:55:35 ubuntu-phablet lomiri[3709]: [2024-08-30:13:55:35.707] qtmir.sessions: TaskController::onSessionStarting - sessionName=dialer-app
Aug 30 13:55:35 ubuntu-phablet dialer-app[18792]: library "eglSubDriverAndroid.so" not found
Aug 30 13:55:36 ubuntu-phablet dialer-app[18792]: library "libadreno_app_profiles.so" not found
Aug 30 13:55:36 ubuntu-phablet dialer-app[18792]: Creating a QMirClientScreen now
Aug 30 13:55:37 ubuntu-phablet dialer-app[18792]: manager set to: "galera"
Aug 30 13:55:42 ubuntu-phablet dialer-app[18792]: virtual void OnlineAccountsClient::Plugin::registerTypes(const char*) Lomiri.OnlineAccounts.Client
Aug 30 13:55:42 ubuntu-phablet dialer-app[18792]: file:///usr/share/dialer-app//SettingsPage/AccountSettings/ofono.qml: No such file or directory
Aug 30 13:55:42 ubuntu-phablet dialer-app[18792]: file:///usr/share/dialer-app//SettingsPage/AccountSettings/ofono.qml: No such file or directory
Aug 30 13:55:42 ubuntu-phablet dialer-app[18792]: file:///usr/share/dialer-app//SettingsPage/MultiSim.qml:102: TypeError: Cannot read property '0' of undefined
Aug 30 13:55:42 ubuntu-phablet dialer-app[18792]: [PERFORMANCE]: Last frame took 37 ms to render.
Aug 30 13:56:16 ubuntu-phablet dialer-app[18792]: QObject::startTimer: Timers cannot be started from another thread
Hi @Timespansoul
I have restarted the phone several times and I have also tried to switch to speaker during calls.
Hi @rubencarneiro ,
thanks for porting Ubuntu touch for oneplus nord n100.
I recently installed UT focal rc using ubports installer.
Everything is working fine except audio in calls. I cant hear and they cant hear me. However, I have audio in other apps.
Please let me know of there's any workaround for this.
Thank you