Hello, these days my friends & I are working with Samsung Galaxy J6+, provided following specification about it:

Hardware :

• SoC : Qualcomm Snapdragon 425 (Quad-core 1.4GHz Cortex A53)
• RAM : 3GB/4GB
• ROM : 32GB/64GB
• 6" TFT LED Screen with 1480x720

Platform :

• Android Start with version 8.1, current have 9.0, will upgrade to 10
• Kernel version : 3.18.71(Oreo)/3.18.120(Pie) ARCH: armhf

Preparing Method :

1. Use Halium-9 to Build the Halium-boot.img & System.img
2. Let Phone go to Recovery (TWRP), and wipe everything
3. Install UBports GSI installer : https://build.lolinet.com/file/halium/GSI/ubports_GSI_installer_v8.zip
4. in Linux, convert the spread ext4 image from system.img to standard ext4 img, and copy into phone, replace /data/android-rootfs.img with it
5. Install Halium-boot.img in boot partition
6. Reboot and wait the Virtual Ethernet Link is up, set a random MAC address and SSH it into "phablet@10.15.19.82"

• Listing Device Checking List : (WIP, updating when have process)

Working:

Not working:
Actors: Manual brightness
Actors: Notification LED
Actors: Torchlight
Actors: Vibration
Camera: Flashlight
Camera: Photo
Camera: Video
Cellular: Carrier info, signal strength
Cellular: Data connection
Cellular: Incoming, outgoing calls
Cellular: MMS in, out
Cellular: PIN unlock
Cellular: SMS in, out
Cellular: Change audio routings
Cellular: Voice in calls
Endurance: Battery lifetime > 24h from 100%
Endurance: No reboot needed for 1 week

• (Reboot once again after flashed)

GPU: Boot into UI
GPU: Video acceleration
Misc: Anbox patches applied to kernel
Misc: Battery percentage
Misc: Offline charging
Misc: Online charging
[No support] Misc: Wirelss charging - only for devices that support it
Misc: Recovery image
Misc: Reset to factory defaults
Misc: Shutdown / Reboot
Network: Bluetooth
Network: Flight mode
Network: Hotspot
[No support] (Network: NFC - disabled atm due to no middleware)
Network: WiFi
Sensors: Automatic brightness
(Sensors: Fingerprint reader - disabled atm due to no middleware)
Sensors: GPS
Sensors: Proximity
Sensors: Rotation
Sensors: Touchscreen
Sound: Earphones
Sound: Loudspeaker
Sound: Microphone
Sound: Volume control
USB: MTP access
USB: RNDIS access
USB: External monitor - only for devices that support it

Please let me know if you have this phone and want to test it, many thanks!
P.S. Galaxy J4+ can also use this.

Hello everyone,

I'm Kazuma from Japan, since discovered with this so great project, decided to port this on My Samsung Galaxy J6+ (J610G), due to ages over 40, and have experience with Computer Hardware engineering long time ago, so please don't ask me with Software thing because I can't answer with it, thanks!

BR,
Kazuma.

Status :(Sorry these days I'm out of work and didn't take care on this,sorry )

[Arm64]

1. checked some folder can't mount , including /vendor, cause necessary library can't load.
2. the lxc-checkconfig seems have some missing items
3. Confirmed U5 version of samsung stock source have touch panel problem by recovery environment validated, so need to find another source to use.

[arm32]

1. AFAIK, if it boots, it'll reboot once for unknown reason...
2. check /vendor is mounted (better than arm64 we found)
3. seem someone in telegram group is booted into GUI with container started, but have many driver on phone equipped can't use.
   Need Verify :
   i. what the source (KT/DT/VT) he used
   ii. if source is used, what parts is he modified, and whether modified in source reflect on building, and verified it's really usable
   iii. need to check everything parts in test required item is okey...
   iv. if i~iii is ready, should let the issuer reply on Halium github with progress about arm32 things.

Decided to use Arm64 to do:

Repo URL : https://gitlab.com/j6primelte-halium

Thanks!

Hi all,

Halium-9 has some special items :

1. Seems Erfan's GSI only support ARM64 kernel & system, but I'm still trying if arm32 can do
2. halium-install for halium-9 seems have problem while halium-7.1 didn't face before, so If anyone have faced before, let us know, thanks!
3. in Halium-9, need use the halium-boot, not the hybris-boot

Currently Progress :

Armhf : Booted into halium-boot.img , every function is not tested and facing error...

Arm64 : building required Halium-boot.img & system.img...

Hello everyone,

I'm Kazuma from Japan, since discovered with this so great project, decided to port this on My Samsung Galaxy J6+ (J610G), due to ages over 40, and have experience with Computer Hardware engineering long time ago, so please don't ask me with Software thing because I can't answer with it, thanks!

BR,
Kazuma.

Hello, these days my friends & I are working with Samsung Galaxy J6+, provided following specification about it:

Hardware :

• SoC : Qualcomm Snapdragon 425 (Quad-core 1.4GHz Cortex A53)
• RAM : 3GB/4GB
• ROM : 32GB/64GB
• 6" TFT LED Screen with 1480x720

Platform :

• Android Start with version 8.1, current have 9.0, will upgrade to 10
• Kernel version : 3.18.71(Oreo)/3.18.120(Pie) ARCH: armhf

Preparing Method :

1. Use Halium-9 to Build the Halium-boot.img & System.img
2. Let Phone go to Recovery (TWRP), and wipe everything
3. Install UBports GSI installer : https://build.lolinet.com/file/halium/GSI/ubports_GSI_installer_v8.zip
4. in Linux, convert the spread ext4 image from system.img to standard ext4 img, and copy into phone, replace /data/android-rootfs.img with it
5. Install Halium-boot.img in boot partition
6. Reboot and wait the Virtual Ethernet Link is up, set a random MAC address and SSH it into "phablet@10.15.19.82"

• Listing Device Checking List : (WIP, updating when have process)

Working:

Not working:
Actors: Manual brightness
Actors: Notification LED
Actors: Torchlight
Actors: Vibration
Camera: Flashlight
Camera: Photo
Camera: Video
Cellular: Carrier info, signal strength
Cellular: Data connection
Cellular: Incoming, outgoing calls
Cellular: MMS in, out
Cellular: PIN unlock
Cellular: SMS in, out
Cellular: Change audio routings
Cellular: Voice in calls
Endurance: Battery lifetime > 24h from 100%
Endurance: No reboot needed for 1 week

• (Reboot once again after flashed)

GPU: Boot into UI
GPU: Video acceleration
Misc: Anbox patches applied to kernel
Misc: Battery percentage
Misc: Offline charging
Misc: Online charging
[No support] Misc: Wirelss charging - only for devices that support it
Misc: Recovery image
Misc: Reset to factory defaults
Misc: Shutdown / Reboot
Network: Bluetooth
Network: Flight mode
Network: Hotspot
[No support] (Network: NFC - disabled atm due to no middleware)
Network: WiFi
Sensors: Automatic brightness
(Sensors: Fingerprint reader - disabled atm due to no middleware)
Sensors: GPS
Sensors: Proximity
Sensors: Rotation
Sensors: Touchscreen
Sound: Earphones
Sound: Loudspeaker
Sound: Microphone
Sound: Volume control
USB: MTP access
USB: RNDIS access
USB: External monitor - only for devices that support it

Please let me know if you have this phone and want to test it, many thanks!
P.S. Galaxy J4+ can also use this.