Porting to Samsung Galaxy J6+ (J610F/J610G)

Kazuma

Hello, these days my friends & I are working with Samsung Galaxy J6+, provided following specification about it:

Hardware :

SoC : Qualcomm Snapdragon 425 (Quad-core 1.4GHz Cortex A53)
RAM : 3GB/4GB
ROM : 32GB/64GB
6" TFT LED Screen with 1480x720

Platform :

Android Start with version 8.1, current have 9.0, will upgrade to 10
Kernel version : 3.18.71(Oreo)/3.18.120(Pie) ARCH: armhf

Preparing Method :

Use Halium-9 to Build the Halium-boot.img & System.img
Let Phone go to Recovery (TWRP), and wipe everything
Install UBports GSI installer : https://build.lolinet.com/file/halium/GSI/ubports_GSI_installer_v8.zip
in Linux, convert the spread ext4 image from system.img to standard ext4 img, and copy into phone, replace /data/android-rootfs.img with it
Install Halium-boot.img in boot partition
Reboot and wait the Virtual Ethernet Link is up, set a random MAC address and SSH it into "phablet@10.15.19.82"

Listing Device Checking List : (WIP, updating when have process)

Working:

Not working:
Actors: Manual brightness
Actors: Notification LED
Actors: Torchlight
Actors: Vibration
Camera: Flashlight
Camera: Photo
Camera: Video
Cellular: Carrier info, signal strength
Cellular: Data connection
Cellular: Incoming, outgoing calls
Cellular: MMS in, out
Cellular: PIN unlock
Cellular: SMS in, out
Cellular: Change audio routings
Cellular: Voice in calls
Endurance: Battery lifetime > 24h from 100%
Endurance: No reboot needed for 1 week

(Reboot once again after flashed)

GPU: Boot into UI
GPU: Video acceleration
Misc: Anbox patches applied to kernel
Misc: Battery percentage
Misc: Offline charging
Misc: Online charging
[No support] Misc: Wirelss charging - only for devices that support it
Misc: Recovery image
Misc: Reset to factory defaults
Misc: Shutdown / Reboot
Network: Bluetooth
Network: Flight mode
Network: Hotspot
[No support] (Network: NFC - disabled atm due to no middleware)
Network: WiFi
Sensors: Automatic brightness
(Sensors: Fingerprint reader - disabled atm due to no middleware)
Sensors: GPS
Sensors: Proximity
Sensors: Rotation
Sensors: Touchscreen
Sound: Earphones
Sound: Loudspeaker
Sound: Microphone
Sound: Volume control
USB: MTP access
USB: RNDIS access
USB: External monitor - only for devices that support it

Please let me know if you have this phone and want to test it, many thanks!
P.S. Galaxy J4+ can also use this.

libremax

@Kazuma Hello, in your post, it's not very clear what is working at this stage.

Keneda

@libremax
That what i though seeing this thred, seems all working when reading OP.

@Kazuma
At least, if everything's working, add :
Not Working :
Nothing

Anyway, great work for the community.

Kazuma

Currently Progress :

Armhf : Booted into halium-boot.img , every function is not tested and facing error...

Arm64 : building required Halium-boot.img & system.img...

Kazuma

Hi all,

Halium-9 has some special items :

Seems Erfan's GSI only support ARM64 kernel & system, but I'm still trying if arm32 can do
halium-install for halium-9 seems have problem while halium-7.1 didn't face before, so If anyone have faced before, let us know, thanks!
in Halium-9, need use the halium-boot, not the hybris-boot

Kazuma

Decided to use Arm64 to do:

Repo URL : https://gitlab.com/j6primelte-halium

Thanks!

Kazuma

Status :(Sorry these days I'm out of work and didn't take care on this,sorry )

[Arm64]

checked some folder can't mount , including /vendor, cause necessary library can't load.
the lxc-checkconfig seems have some missing items
Confirmed U5 version of samsung stock source have touch panel problem by recovery environment validated, so need to find another source to use.

[arm32]

AFAIK, if it boots, it'll reboot once for unknown reason...
check /vendor is mounted (better than arm64 we found)
seem someone in telegram group is booted into GUI with container started, but have many driver on phone equipped can't use.
Need Verify :
i. what the source (KT/DT/VT) he used
ii. if source is used, what parts is he modified, and whether modified in source reflect on building, and verified it's really usable
iii. need to check everything parts in test required item is okey...
iv. if i~iii is ready, should let the issuer reply on Halium github with progress about arm32 things.

linguamundi

@kazuma Hello... Just got Galaxy J6 phone and want to use Ubuntu touch on it, as I do not like other operation systems. Is it safe and how do I do it? Can you advise, please? Thank you Kazuma...

AppLee

@linguamundi
Here is probably the best place to start if you want to help the port going further.
No need to ask the same question all around the forum, answers won't come faster and it doesn't help to get the information scattered between different threads.

FuseDevCode

@kazuma This is amazing porting, I have Samsung J6+ too, But you have an any GitHub repo? I maybe help you to porting.

G1ott1

I'm willing to try your port to my J4+. What should I expect?