Posts made by markh4b

Another update: Tried anbox on my desktop first, and there are lots of issues with the apps. So most likely I'll leave Android installed on the tablet directly.

@arubislander Probably the latter, because I hardly understand whether the commands are sufficient:

$ sudo -s
# dd if=/dev/null of=/userdata/ubuntu.img bs=1M seek=6000 count=0
# resize2fs -f /userdata/ubuntu.img
# reboot

My best guess is that it seeks 6000 blocks of size 1 megabyte each, and writes those to a file ubuntu.img, then resizes/expands the root partition with this new file and reboots?

@arubislander It was a really generic message, such as "not enough space left on device". I cannot remember exactly, and I can offer to reproduce it from the 12th of August onward. Currently the device is flashed with Android, instead of Ubuntu.

Update: Meanwhile I tried repartitioning the device with a method from here: The one that increases the partition size to 6gb (previous partition size was 2gb, checked that beforehand). Now the device still boots correctly and works normally, but adb shell connection gets stuck on updates/installations somewhere between 90% and 100%. Error message is usually that the device is out of memory.

So, back to installing anbox into a libertine container at the moment.

• First I tried cloning the installer from github. This told me that it is deprecated and that I should install via snap.
• Installation of snap (to be specific: 'snapd') requires the apparmor package in the container.
• Installation of apparmor failed:

E: Sub-process /usr/bin/dpkg returned an error code (1)
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
After this operation, 0 B of additional disk space will be used.
Setting up apparmor (2.10.95-0ubuntu2.9) ...
mktemp: failed to create file via template: '/run/user/32011/confined/com.ubuntu.terminal/tmp.XXXXXXXXXX': No such file or directory

• Tried it via adb shell then, with the following output (apparently it already has apparmor)

libertine-container-manager install-package -p apparmor
Hit:1 http://ports.ubuntu.com/ubuntu-ports xenial InRelease
Hit:2 http://ppa.launchpad.net/ci-train-ppa-service/stable-phone-overlay/ubuntu xenial InRelease
Hit:3 http://ports.ubuntu.com/ubuntu-ports xenial-updates InRelease
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
apparmor is already the newest version (2.10.95-0ubuntu2.9).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up apparmor (2.10.95-0ubuntu2.9) ...
update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults
diff: /var/lib/apparmor/profiles/.apparmor.md5sums: No such file or directory
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
ChrootContainer.py:235: INFO: _run_ldconfig(): Refreshing the container's dynamic linker run-time bindings...

• Installing snapd from adb shell worked fine, now on to installing the actual anbox. This gave me massive errors:

libertine-container-manager exec -c "snap install --devmode --beta anbox"
panic: user: lookup userid 32011: no such file or directory [recovered]
panic: user: lookup userid 32011: no such file or directory

goroutine 1 [running]:
panic(0xab7e5e78, 0xbbe986d8)
/usr/lib/go-1.6/src/runtime/panic.go:481 +0x370
main.main.func1()
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/cmd/snap/main.go:370 +0x7c
panic(0xab7e5e78, 0xbbe986d8)
/usr/lib/go-1.6/src/runtime/panic.go:443 +0x490
github.com/snapcore/snapd/client.storeAuthDataFilename(0x0, 0x0, 0x0, 0x0)
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/client/login.go:99 +0xb4
github.com/snapcore/snapd/client.readAuthData(0x0, 0x0, 0x0)
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/client/login.go:135 +0x34
github.com/snapcore/snapd/client.(*Client).setAuthorization(0xbbe8cff0, 0xbbe55420, 0x0, 0x0)
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/client/client.go:133 +0x34
github.com/snapcore/snapd/client.(*Client).raw(0xbbe8cff0, 0xab879b08, 0x4, 0xbbea4310, 0xf, 0x0, 0xbbea2780, 0xf56ca6d8, 0xbbe7a780, 0xab33b8dc, ...)
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/client/client.go:191 +0x2c0
github.com/snapcore/snapd/client.(*Client).do(0xbbe8cff0, 0xab879b08, 0x4, 0xbbea4310, 0xf, 0x0, 0xbbea2780, 0xf56ca6d8, 0xbbe7a780, 0xab7e6500, ...)
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/client/client.go:236 +0x114
github.com/snapcore/snapd/client.(*Client).doAsyncFull(0xbbe8cff0, 0xab879b08, 0x4, 0xbbea4310, 0xf, 0x0, 0xbbea2780, 0xf56ca6d8, 0xbbe7a780, 0x0, ...)
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/client/client.go:300 +0xc8
github.com/snapcore/snapd/client.(*Client).doAsync(0xbbe8cff0, 0xab879b08, 0x4, 0xbbea4310, 0xf, 0x0, 0xbbea2780, 0xf56ca6d8, 0xbbe7a780, 0x0, ...)
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/client/client.go:293 +0x7c
github.com/snapcore/snapd/client.(*Client).doSnapAction(0xbbe8cff0, 0xab87d248, 0x7, 0xffe21818, 0x5, 0xbbe8e7b0, 0x0, 0x0, 0x0, 0x0)
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/client/snap_op.go:167 +0x4ac
github.com/snapcore/snapd/client.(*Client).Install(0xbbe8cff0, 0xffe21818, 0x5, 0xbbe8e7b0, 0x0, 0x0, 0x0, 0x0)
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/client/snap_op.go:85 +0x68
main.(*cmdInstall).installOne(0xbbe8e510, 0xffe21818, 0x5, 0xbbe8e7b0, 0x0, 0x0)
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/cmd/snap/cmd_snap_op.go:356 +0x19c
main.(*cmdInstall).Execute(0xbbe8e510, 0xbbea2500, 0x0, 0x4, 0x0, 0x0)
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/cmd/snap/cmd_snap_op.go:465 +0x278
github.com/snapcore/snapd/vendor/github.com/jessevdk/go-flags.(*Parser).ParseArgs(0xbbdcfbc0, 0xbbd64098, 0x4, 0x5, 0x0, 0x0, 0x0, 0x0, 0x0)
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/vendor/github.com/jessevdk/go-flags/parser.go:316 +0x918
github.com/snapcore/snapd/vendor/github.com/jessevdk/go-flags.(*Parser).Parse(0xbbdcfbc0, 0x0, 0x0, 0x0, 0x0, 0x0)
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/vendor/github.com/jessevdk/go-flags/parser.go:186 +0xac
main.run(0x0, 0x0)
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/cmd/snap/main.go:391 +0x30
main.main()
/build/snapd-754fGy/snapd-2.34.2/_build/src/github.com/snapcore/snapd/cmd/snap/main.go:375 +0xb6c

Might have to do with git not being installed? Let's try that again. Nope, still the same output with git installed in the container.

Same problem for the container. Installing snapd does not work because there is not enough space availabel. Guess I'll have to try partitioning then. There is no crucial data on the device, so installing a clean Ubuntu Touch if something fails will not bring me any pain.

Do you have any instructions on how to do it? I found some instructions, but they were not really explaining what each command does, and there seem to be different approaches.

Ah, this clears up some of the issues. I also have a libertine container on the M10, maybe I could set up anbox inside that container?

Hello, I wanted to install Anbox for Ubuntu Touch on a BQ M10 FHD, and followed the instructions here. I'll go into details:

• Botched it the first time and went into fastboot mode without having fastboot installed on the computer. Restarted the phablet manually
• Botched set the variables wrong the first time around, continued typing in the values "frieza" and "boot" myself (without the quotes, obviously).
• Flashing the boot partition with the image works. Now, the second part does of the instruction does not work for me. Note: Did not delete the image from my HDD, I skipped the rm command.

Here is where my questions come into play:

• With the different boot image, should the phablet launch differently? Starts up just normal. I logged in on the phablet the first few times before doing the remount; In my latest try I just connected the adb shell without logging in at the phablet.

• Should there be an output or some visible result from the remount command? As far as I understand it,

  sudo mount -o rw,remount /

  should give me read and write access to something, but I guess it did not. The first time I wrote "-o rw, remount /" which gave me an error. "... rw,remount /" produces nothing. Anyway, after that the update works, but the install command gives me an error that there is not enough space in /var/.../archives writing from memory now, can provide the exact output later. There is about 5gb left on the phablet, which I hope to be enough space. So, my best guess was, that I do not actually have write access.

• Do I have to go through the entire process every time? I mean: Go into fastboot mode, flash boot image, reboot? Or can I simply try the remount as much as I like?

Thank you for your support!