Ubuntu Touch Programming Course

Pulsar33

@advocatux @mimecar : Hello
Thank you for the reply, however I'm not sure to know what to do now. As far as I understand, the problem is to update the kits, not my system which is perfectly up to date (I use MINT18.3). I've searched the whole GUI of Qt Creator but not found how to specify the sources.

Where are defined the sources for the kits ?

Moreover, why am I the first to have the problem following the Programming Course if the end of life of Vivid was in February 2016 ?

Good evening
Pulsar33

Talkless

@pulsar33 said in Ubuntu Touch Programming Course:

As far as I understand, the problem is to update the kits, not my system which is perfectly up to date

It seem so. I guess we need to update /etc/apt/sources.list inside lxd contaner used for building?

Talkless

I did this:

Enter container with lxc exec device-armhf -- /bin/bash
Replace archive into old-releases in sources.list with sed -i "s|archive|old-releases|" /etc/apt/sources.list

But after that, running apt update inside container, I get errors about ports.ubuntu.com/ubuntu-ports/dists/vivid/... (404 Not Found), while old-releases works fine for other repositories.

There are in fact no vivid in this repo:
http://ports.ubuntu.com/ubuntu-ports/dists/

So what cane ports host be changed into? Is there archive as that old-releases somewhere?

chris

@talkless In my containers I replaced all urls by http://old-releases.ubuntu.com/ubuntu
also the ports ones
vivid vivid-security vivid-backports vivid-updates (main / multiverse / restricted / universe) are all included there

Talkless

@chris said in Ubuntu Touch Programming Course:

@talkless In my containers I replaced all urls by http://old-releases.ubuntu.com/ubuntu
also the ports ones
vivid vivid-security vivid-backports vivid-updates (main / multiverse / restricted / universe) are all included there

But there's no ubuntu-ports repository (directory) inside http://old-releases.ubuntu.com/

Pulsar33

@talkless @chris @mimecar : Well shot Guys !
Thank you for the tip. I didn't try for the armhf-device kit but I succeed for the desktop kit. In fact, the configuration is different for the two kits and the desktop kit only involves "archive". So the tip of @Talkless was clean and the (long) update took place without error.

101 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 95.3 MB of archives. After this operation, 36.1 MB of additional disk space will be used.
[...]
Get:103 http://ppa.launchpad.net/ci-train-ppa-service/stable-phone-overlay/ubuntu/ vivid/main unity8-private amd64 8.15+15.04.20161129-0ubuntu1 [584 kB]
[...]
Processing triggers for libc-bin (2.21-0ubuntu4.0.1) ...
---Task exited with no errors---
Most updates are from ci-train-ppa-service ...
The HelloWorld example compiles and runs without problem.

Upon the next launch of Qt Creator, only the armhf-device update is proposed.
Finding ports.ubuntu.com correct source may solve the last problem.

Good evening
Pulsar33

Pulsar33

Hello,
I'm not sure I've done the right things and I hope a "guru" will warn me if necessary but I found how to update the device-armhf kit :

Then, the (long) update ends with no error.

This seems fine but I must now understand why all my choices are for 14-10 framework despite the fact that my kits are made with 15-04 framework ...
limited choices

Solution is welcome !
Best regards
Pulsar33

metalbiker

I think this is a major indication that the SDK needs to be maintained so we can make Ubuntu Touch a success. I think a lot of you can agree with that.

advocatux

@metalbiker this is a volunteer based project, and it's free software, so if any developer(s) wants to maintain it, the door is open.

tatonuta

This post is deleted!

tatonuta

Hello! I am having a problem with creation of Kits (pages 15-19 of the PDF).

I try to create new Kit/Build target (as described on pages 15-19) and I choose option "Build and run your application locally on the Desktop", and click "Next", and choose the "Ubuntu-sdk-15.04-dev" and click "Next", and choose target name "default", and click "Finish"

then a window appears showing that the kit is being downloaded

0_1531090363679_Zrzut ekranu z 2018-07-09 00-50-08_same-okno.png

and finally an error message appears:

Creating image with: framework: ubuntu-sdk-15.04 arch: amd64
error: Failed to load raw.lxc
---Task exited with errors, please check the output---

0_1531087501292_Zrzut ekranu z 2018-07-08 23-45-58_800px.png

The same error happens when I try to do the kit under "Build your application to run on a Ubuntu device or emulator" and choose "Ubuntu-sdk-15.04-dev".

[I do not use Wizard because I had errors during the first try and the "Do not show this Wizard the next time" was ticked so I have no access to the Wizard anymore. But I have found equivalent wizard in QTcreator - Tools - Ubuntu so I use this one]

I am doing it on a new, freshly installed Ubuntu 16.04.4. Before this errors I had errors similar to people who wrote in this thread and I used their/your hints to overcame those errors (like changing .

tatonuta

@mimecar said in Ubuntu Touch Programming Course:

Good afternoon.
You can now download the resources I used in the UbuconParis 2017 workshop. The virtual machine has the following features:

Ubuntu 16.04 with the Mate desktop.
SDK already configured with IDE icon on the desktop.
The workshop exercises are saved in the User Folder.

Hi! Thanks for doing it! After several hours I still have problems with installing Ubuntu SDK IDE so it looks like a perfect solution for me.

I have downloaded the 13 GB files. What do I do now?

advocatux

@tatonuta you need to configure VirtualBox on your computer before installing those downloaded files.

tatonuta

@advocatux Thanks! Is this a right tutorial for mounting VirtualBox? http://nomone.com/2016/11/05/mounting-a-vdi-file-in-ubuntu/ If yes: I have made all steps which are in the instructions and have successfully mounted the /dev/nbd0p1. But what should I do next? What command? How can I install the downloaded file?

advocatux

@tatonuta those instructions you've linked are for quemu, not virtualbox

I think Virtualbox is easier if you don't have previous experience with VM, so install virtualbox and then follow this http://linuxbsdos.com/2015/11/13/how-to-import-a-virtual-machine-image-into-virtualbox/

tatonuta

@advocatux Thanks a lot. It worked for me.

mimecar

Good afternoon.

I wanted to comment on the status of the programming course. For personal reasons I have left the course on hold. In these moments with the day to day I already have enough.

I have reviewed the GitBook server and I see that several things have changed. Now the course is within the "legacy" subdomain and some functions like the start page have been disabled. The book can be updated but with several conditions:

The book can only be in HTML format.
Plugins no longer work.

For these reasons I am considering changing the platform of the course. It does not convince me to generate documentation only in HTML format. The platforms that I see reasonable are:

LaTeX
Sphynx.
LibreOffice.

Of the three platforms I see more powerful LaTeX. It is true that it does more work than using Markdown + GitBook, but it also allows you to better adjust the output in all formats.

What is your opinion?

advocatux

@mimecar hi, good to see you

Yes, LaTeX is more complete than the other two tools, and its output has the highest possible quality, but it has the steeper learning curve too, and that's not good if you want people helping you with your course, someday.

I personally don't see LibreOffice as a good option, so my opinion based in tool functionality, and user-friendliness, I think Sphynx is the best option

Pulsar33

@mimecar Hello

I follow this forum since some months and I was really happy to discover your work (as I said above). There was a chance for me to develop GUI for usefull functions, which is my favorite hobby. I've been programming since the 80's with so many old langages, from microcode to object oriented. However, I don't know about collaborative methods of coding. It's difficult for me to involve in big projects. Nevertheless, I thought that your work could help me to be usefull for the community.

Unfortunately, I'm blocked (as described to youself and others above). I've read that I'm not the only one to have problems. So, mimecar, sorry but I've no idea about the questions you asked. But what I know is that it would be more usefull for the community to give your time in unblocking volunteers instead of improving your (really nice) documentation. Is it possible please ?

Best regards
Pulsar33

flohack

FYI we are in an experimental state with building the sdk again: https://github.com/ubports/usdk-image-tools/pull/1 - if this Pull Request is finally merged it should be able to generate a new SDK

BR