UBports Black Logos. Update Now Avaible for BQ Aquaris U Plus and Volla Phone

[rubencarneiro]

@Ingo yes sorry i will updat the post is also avaible for FP2.

[Ingo]

@rubencarneiro no problem, in fact it didn't occur to me to first check the gitlab repo before asking...

[Stefano]

@rubencarneiro that's ok, thanks anyway.

[Josele13]

Thanks to Ruben for this amount of logos, I love the result and makes our UT more beautiful. now I see smaller android.
For those who do not know much about how to do things, I leave a small text to go step by step and use the terminal as you install the logos, is going the long way but sure.

• Download the files to your PC,

• Place the logo or image in the personal folder,
  put the phone in fastboot mode, let's see if the computer detects it well

• Set phone to developer mode,

• we put in terminal with the phone connected and ignited:

• sudo adb devices

  ....... if it detects it and the numeration of the phone comes out we follow,

• adb reboot bootloader

  .... continue,

• fastboot devices

  ....... if it detects it we continue,

• Give the command below exposed on the terminal, depending on which device,

Nexus 5
How to flash:
• Reboot device to fastboot
• fastboot flash imgdata imgdata.img
Fairphone 2
How to flash:
• Reboot device to fastboot
• In a terminal and do:
• fastboot flash splash splash.img
Meizu MX4
How to flash:
• Reboot device to fastboot
• In a terminal and do:
• fastboot flash logo logo.bin
BQ E4.5
How to flash
• Reboot device to fastboot
• In a terminal and do:
• fastboot flash logo logo.bin
BQ E5
How to flash
• Reboot device to fastboot
• In a terminal and do:
• fastboot flash logo logo.bin
BQ M10HD
How to flash
• Reboot device to fastboot
• In a terminal and do:
• fastboot flash logo logo.bin
BQ M10FHD
How to flash
• Reboot device to fastboot
• In a terminal and do:
• fastboot flash logo logo.bin
OnePlus One
How to flash
• Reboot device to fastboot
• In a terminal do:
• fastboot flash LOGO logo.bin

- When installation is complete, then you put in terminal

• fastboot reboot

the phone will start, the second time you start, you will have the logo changed.

regards...

[rubencarneiro]

@Stefano i will try to fins a way

[rubencarneiro]

@rubencarneiro OPO3T is ready.

[A Former User]

@rubencarneiro Thanks!
Sadly I get:

FAILED (remote: Partition flashing is not allowed)

I enable Developer-mode in Settings but it is disabled after every reboot. What am I doing wrong?

[rubencarneiro]

@thilov said in UBports Black Logos. Update OPO 3/3T:

@rubencarneiro Thanks!
Sadly I get:
FAILED (remote: Partition flashing is not allowed)

have you done fastboot flash LOGO logo.bin
logo all caps?

[rubencarneiro]

@thilov First ypour bootloader should be unlocked second you should flash in fastboot mode

[Lakotaubp]

@rubencarneiro Just tried with same result. Device unlocked and in fastboot (OP3) Partion flashing is not allowed

Edit: Could it be down to having to put dev mode back on after every reboot? Just a thought.

[A Former User]

@rubencarneiro

Bootloader is unlocked and I am in fastboot mode:

thilo@thilo-ESP:~$ cd Downloads/
thilo@thilo-ESP:~/Downloads$ fastboot flash LOGO logo.bin
< waiting for any device >
target reported max download size of 440401920 bytes
sending 'LOGO' (920 KB)...
OKAY [  0.060s]
writing 'LOGO'...
FAILED (remote: Partition flashing is not allowed)
finished. total time: 0.080s

[rubencarneiro]

@thilov try to flash trough recovery https://drive.google.com/file/d/1MBA7yJREcnQ_Pg8D3_cY_VNry-L4_aSc/view?usp=sharing

A friend already teste the update zip and it works.
But flashing trough fastboot should be working

sde17 16.777.216 LOGO 16,00 // The partition exists.

[A Former User]

@rubencarneiro You mean TWRP right?

[rubencarneiro]

@thilov yes.

[Pingu]

Hi, I just have Ubports recovery instead of TWRP. How can I flash (copy?) the update.zip through recovery? step by step - please. I would love to have that Logo....thanks a lot.

[A Former User]

@Pingu

1. Save the recovery.zip on your device.
2. Flash TWRP - see here.
3. Boot the new recovery, go to install, select rubencarneiros recovery.zip and install it

[Pingu]

Now I have TWRP. Thanks, but howto save the recovery.zip on my Device using Fastboot?

[Pingu]

I MADE IT !!! THANKS A LOT - nice Logo. Thank you so much...!

[Pingu]

I had to adb push it, then it worked with twrp and install recovery.zip