Xiaomi Redmi 4X (santoni)
-
@aceclan Your home directory should stay intact, I flashed my nexus 5 on legacy build with halium 7.1 build and everything worked fine.
-
I tried to log in to google account to sync my contacts. But at the log in page, keyboard is not popping up( not showing) . And one more thing, my language BURMESE letters are not showing in sms. Showing only square characters. I tried to install fonts and it is saying read only file system. Any IDEA?
-
Please help me i tried everything always stuck at mi logo, i formated the data and flashed it and still stuck at mi logo never booted to ubuntu. please someone provide step by step process
-
@4htet Keyboard not popping up at Google page is probably a UBports error, the same issue is on Oneplus 3.
And read-only file system, you can try
sudo mount -o rw,remount /to remount the rootfs as root.But your language issue is weird, it could be a UBports issue unless someone tested it on official supported device.
-
@bisaalz Format your /data partition as ext4.
-
Same for me, format data as ext4 does not help. I am unable get any logs,
dmesg -won PC does not show anything,/sys/fs/pstore/console-ramoopsfile does not exist. I am unable to boot your recovery,sudo fastboot boot recovery.imgshow only mi logo. I tried to downgrade firmware, compile system by my own, many recovery images. But I am unable to boot this (and recovery from that post too). Some people on XDA have similar problem. I was using lastest MIUI 11.2 before. -
@Danct12 maybe we should update blobs, I am not sure what else to do.
-
@danqo6 Perhaps you could try to flash a LOS 14.1 rom first and see if LOS loads.
-
@danqo6 , from the fastboot mode, check first:
$ fastboot devices
330915847d15 fastbootthen download and use: Latest TWRP
$ fastboot boot twrp-3.3.1-0-santoni.img
Sending 'boot.img' (24844 KB) OKAY [ 0.783s]
Booting OKAY [ 0.715s]
Finished. Total time: 1.615sAfter Backup ALL and copy TWRP folder to Your PC,
full format: Wipe/Format Data is needed to remove encryption
After flash system.img and rootfs.tar.gz don't forget to boot again to fastboot and flash hallium-boot.img:
fastboot flash boot halium-boot.img -
@bisaalz , I think You forgot:
fastboot flash boot halium-boot.img
-
@aceclan I did everything you said flash every thing still stuck at mi logo but other android custom boots but ubuntu never boots
-
Is it possible to build the boot image with anbox support?
-
@bisaalz Please try to flash LineageOS 14.1 (just that, don't install Ubuntu), and reboot.
If LineageOS 14 boots, can you try to install Ubuntu again? Perhaps this is needed first, I have not updated my device firmware for months now.
-
I don't know how to open the download page, where should I click to get this page
How can i get to the download link？ -
@ub_santoni You should tap on green tick.
-
@alex000090 It's amazing, thank you
-
@Danct12 Can u give me lineage os 14.1 link
-
-
This post is deleted! -
Hi @Danct12
I followed your steps but I cannot get it working (as contrary to LOS 16).
Halium seems ok❯ fastboot boot ../../fastboot/imgs/halium-boot.img downloading 'boot.img'... OKAY [ 0.507s] booting... OKAY [ 0.792s] finished. total time: 1.299sUsing halium scirpt seems to work
❯./halium-install -p ut ../redmi_4/ubports-touch.rootfs-xenial-armhf.tar.gz ../redmi_4/system.img ... * daemon started successfully .halium-install-imgs.kdniI/rootfs.img: 1 file pushed. 29.4 MB/s (3221225472 bytes in 104.455s) I: Pushing android image to /data via ADB .halium-install-imgs.kdniI/system.img: 1 file pushed. 29.2 MB/s (530046976 bytes in 17.321s) real 2m4,878s user 0m0,895s sys 0m4,792s I: Cleaning up umount: .halium-install-rootfs.YfPsB: not mounted.Reboot
dmesg -woutput[ 580.375260] usb 1-10: USB disconnect, device number 8 [ 591.295694] usb 1-10: new high-speed USB device number 9 using xhci_hcd [ 591.316082] usb 1-10: device descriptor read/8, error -32 [ 591.444080] usb 1-10: device descriptor read/8, error -32 [ 591.887680] usb 1-10: new high-speed USB device number 10 using xhci_hcd [ 591.908635] usb 1-10: New USB device found, idVendor=18d1, idProduct=d001, bcdDevice= 3.18 [ 591.908640] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 591.908643] usb 1-10: Product: Failed to boot [ 591.908646] usb 1-10: Manufacturer: Halium initrd [ 591.908648] usb 1-10: SerialNumber: halium-initrd [ 591.911580] rndis_host 1-10:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-10, RNDIS device, ce:bd:52:32:a7:cb [ 591.929671] rndis_host 1-10:1.0 enp0s20f0u10: renamed from usb0SSH does not seem to work (either by using connect script or manual setup)
./connect.py -p ssh -u phablet * The device seems to be connected as enp0s20f0u10 * Connecting using ssh ssh: connect to host 10.15.19.82 port 22: No route to hostTelnet is working though but:
cat /var/lib/lxc/android/rootfs/ueventd*.rc|grep ^/dev|sed -e 's/^\/dev\///'|awk '{printf "ACTION==\"add\", KERNEL==\"%s\", OWNER=\"%s\", GROUP=\"%s\", MODE=\"%s\"\n",$1,$3,$4,$2}' | sed -e 's/\r//' > /usr/lib/lxc-android-config/70-[santoni].rules cat: can't open '/var/lib/lxc/android/rootfs/ueventd*.rc': No such file or directory /bin/sh: can't create /usr/lib/lxc-android-config/70-[santoni].rules: nonexistent directoryAdditionaly
ls -la /var/ total 0 drwxr-xr-x 3 0 0 60 Jun 2 22:38 . drwxr-xr-x 22 0 0 460 Jun 2 22:39 .. drwxr-xr-x 2 0 0 40 Jun 2 22:38 lock ls -la /lib/ total 144 drwxr-xr-x 7 0 0 180 Mar 6 2020 . drwxr-xr-x 22 0 0 460 Jun 2 22:39 .. drwxr-xr-x 2 0 0 740 Mar 6 2020 aarch64-linux-gnu -rwxr-xr-x 1 0 0 144064 May 8 2016 klibc-l2KWxiQhsOhwWkxGl3jGkrDaJnQ.so lrwxrwxrwx 1 0 0 28 Mar 6 2020 ld-linux-aarch64.so.1 -> aarch64-linux-gnu/ld-2.24.so drwxr-xr-x 2 0 0 80 Mar 6 2020 modprobe.d drwxr-xr-x 3 0 0 60 Mar 6 2020 modules drwxr-xr-x 3 0 0 80 Mar 6 2020 systemd drwxr-xr-x 3 0 0 100 Mar 6 2020 udevAny ideas?
