Sony Xperia 10 (kirin)

becherekmg

@lakotaubp Hello. I have got problems with my cellular. After reboot cellular works pretty well, but after several hours it is like wheel of fortune if I can make a call or not. Sometimes it works, sometimes looses connection after a call (like linked here) and sometimes there is no network and I can't make any call. But my Sim card is still sign on the network, so it seems I am not unreachable although no one can reach my phone. Only reboot can help me.
I would like to ask where I can insert my syslog. Here? Or is it better to create a new thread? I copied some rows from syslog to another file when my phone lost connection to the network after a call. The file has over 1200 rows, because I don't know which rows are important.

Lakotaubp

@becherekmg You can use log viewer from the OpenStore to post logs and put a link here, but sorting your issue is above me.

Akikyo

@becherekmg what version do you have? I have I4113. If i remember i had the same problem, but that was once. I build system with latest OTA-16 and flashed. Im using as daily since 24.03.2021 and no problems. I tried to post screenshot but looks like gallery has no permissions, app armor blocks.

Akikyo

This post is deleted!

Jhackler

inserting sim and getting the binder setting configed so it knows to try and get a cellular network is bootlooping the phone lol

becherekmg

@akikyo said in Sony Xperia 10 (kirin):

@becherekmg what version do you have? I have I4113. If i remember i had the same problem, but that was once. I build system with latest OTA-16 and flashed. Im using as daily since 24.03.2021 and no problems. I tried to post screenshot but looks like gallery has no permissions, app armor blocks.

I have I4113, too. But my cellular is fooling around with me. I found out that ofono restart can help me. I have also tried sudo ubports-qa install xenial_-_fix-end-call but my phone did not start after rebooting (display showed Sony logo only). I used your link to download artifacts.
As for permissions, I have similar problems. I can't preview photos in gallery app or share them with other apps, if I save them to device store (/home/phablet/Pictures/). But if I save them to sd card, there is no problem. I did not look for any solution because I am trying to solve my cellular problems most of all...

For interest's sake which version of Android 9 do you have? And what did you use for flash Android 9? Emma or Flashtool or newflasher?

Jhackler

@akikyo any clue what would cause adding a sim to have a hard lockup and reboot ?

Jhackler

@jhackler well I just donated lol can't wait till I can put a sim in without the ui locking up 15 seconds into boot and boot looping lol

Akikyo

@becherekmg Yes android 9, version 53.0.A.8.71 flashed by Emma.

becherekmg

Today, I found out that I have empty /android/persist folder. Could it bring about my problems with the cellular? Do I catch correctly, that /persist partition is responsible for sensors and carrier network etc on Android? And is it important to have some files in that folder for the same reason in Ubuntu touch? Other sensors works perfectly, I have no trouble with wi-fi adapter or data. But could be the clue missing files in that folder?

Keneda

@becherekmg i have no "persist" folder in "/android" directory on my device.

HengYeDev

@becherekmg have you tried the fix by goliath51?

AdLinux

@hengyedev I haven't been able to get updates to work on my phone, but I have just realised that I only temporarily had TWRP on the phone, I never fully installed it (I used the Lineage OS install guide in conjunction with your guide to install Ubuntu Touch: https://wiki.lineageos.org/devices/kirin/install ) So, the phone doesn't have TWRP on it after I installed Ubuntu Touch (I assume it just has the stock recovery [if there even is one] still installed instead).

Should I properly flash TWRP to the phone? to ensure that the updates that the phone downloads actually install properly. As they seem to download new 'versions' but whenever I click 'Restart & Update' the updates don't get installed to the phone.

Jhackler

how often does the image builds get updated for this?

AdLinux

@jhackler said in Sony Xperia 10 (kirin):

how often does the image builds get updated for this?

There haven't been any builds for quite a while now, I really hope that there are plans to make a new one soon as this would be great if it is at all possible as the current builds are getting a little bit old.

Are there plans to have a development roadmap for the Xperia 10? And are there any plans to have it added to the UBports installer?

Akikyo

Would be nice to see updates for this phone. I really like UT, maybe not so much gestures like on SFOS but still i feel UT much more open and have nice community. I dont understand why UT community dont focus on phones which already are supported by Jolla. This might increase potenial users! The reason i bought Xperia 10, is replacement for Iphone SE which is small, handy. Sony 21:9 ratio is perfect joice and quite nice hardware among rest devices! Second reason was support for stable SFOS and in development UT. For me the winner is UT!

I flashed once again UT and what is really missing for long term daily usage is:

sometimes morph browser crashes due to lack of memory
app armor blocks sharing images
no led notifications
no adb support
while connected to pc usb, no charge
sometimes shutdown restarts phone instead real shutdown
no andbox support
OTA updates

My question is, can i get some guidence to where look into to fix mentoined bugs? Im programmer, but the mobile phone architecture is something new, i would say the architecure is quite messy and hard to understand from where to start - logs, responsible services, debugin, permissions...

jbalmer

@hengyedev said in Sony Xperia 10 (kirin):

Port for Sony Xperia 10 (kirin)

Sources
Kernel: https://gitlab.com/ubports/community-ports/android9/sony-xperia-10/kernel-sony-kirin
Device: https://gitlab.com/ubports/community-ports/android9/sony-xperia-10/sony-kirin
Halium: Halium 9 generic systemimage

Status

Working

Actors: Manual brightness
Actors: Vibration
Camera: Photo
Camera: Video
Camera: Switch between back and front camera
Cellular: Carrier info, signal strength
Cellular: Data connection
Cellular: Incoming, outgoing calls
Cellular: MMS in, out
Cellular: PIN unlock
Cellular: SMS in, out
Cellular: Change audio routings
Cellular: Voice in calls
Endurance: Battery lifetime > 24h from 100%
Endurance: No reboot needed for 1 week
GPU: Boot into UI
GPU: Hardware video decoding
Misc: Battery percentage
Misc: Offline charging
Misc: Online charging
Misc: Reset to factory defaults
Misc: RTC time is used after reboot
Misc: SD card detection and access - only for devices that support it
Misc: Shutdown / Reboot
Network: Bluetooth
Network: Flight mode
Network: Hotspot
Network: WiFi
Sensors: Automatic brightness
Sensors: Fingerprint reader
Sensors: Rotation
Sensors: Touchscreen
Sound: Earphones
Sound: Loudspeaker
Sound: Microphone
Sound: Volume control

Untested

USB: MTP access
Libertine
Sensors: GPS
MMS

Not Working
Torch
Lights
Anbox

Install
IMPORTANT: Install stock Android 9 Sony ROM (53.0.*)
Download latest flashableartifacts from https://gitlab.com/ubports/community-ports/android9/sony-xperia-10/sony-kirin/-/jobs
Format userdata to ext4
Go to TWRP and make sure you are on the A slot. If not, choose the A slot.
fastboot flash boot_a boot.img
fastboot flash system_a system.img
Boot into Ubuntu Touch!

What? Who? Why? HOW??? Where????? Where do I downlaod latest flashableartifacts because there is now file named that. Thanks.

AppLee

@jbalmer
No need to post the same thing twice.
This would be interpreted as spam. I already answered in the thread you opened.
Also note that we follow the Ubuntu code of conduct https://ubuntu.com/community/code-of-conduct

Now welcome and I hope you'll manage to install UT on your phone.

jbalmer

@jbalmer

@jbalmer said in Sony Xperia 10 (kirin):

@hengyedev said in Sony Xperia 10 (kirin):
Port for Sony Xperia 10 (kirin)

Sources
Kernel: https://gitlab.com/ubports/community-ports/android9/sony-xperia-10/kernel-sony-kirin
Device: https://gitlab.com/ubports/community-ports/android9/sony-xperia-10/sony-kirin
Halium: Halium 9 generic systemimage

Status

Working

Actors: Manual brightness
Actors: Vibration
Camera: Photo
Camera: Video
Camera: Switch between back and front camera
Cellular: Carrier info, signal strength
Cellular: Data connection
Cellular: Incoming, outgoing calls
Cellular: MMS in, out
Cellular: PIN unlock
Cellular: SMS in, out
Cellular: Change audio routings
Cellular: Voice in calls
Endurance: Battery lifetime > 24h from 100%
Endurance: No reboot needed for 1 week
GPU: Boot into UI
GPU: Hardware video decoding
Misc: Battery percentage
Misc: Offline charging
Misc: Online charging
Misc: Reset to factory defaults
Misc: RTC time is used after reboot
Misc: SD card detection and access - only for devices that support it
Misc: Shutdown / Reboot
Network: Bluetooth
Network: Flight mode
Network: Hotspot
Network: WiFi
Sensors: Automatic brightness
Sensors: Fingerprint reader
Sensors: Rotation
Sensors: Touchscreen
Sound: Earphones
Sound: Loudspeaker
Sound: Microphone
Sound: Volume control

Untested

USB: MTP access
Libertine
Sensors: GPS
MMS

Not Working
Torch
Lights
Anbox

Install
IMPORTANT: Install stock Android 9 Sony ROM (53.0.*)
Download latest flashableartifacts from https://gitlab.com/ubports/community-ports/android9/sony-xperia-10/sony-kirin/-/jobs
Format userdata to ext4
Go to TWRP and make sure you are on the A slot. If not, choose the A slot.
fastboot flash boot_a boot.img
fastboot flash system_a system.img
Boot into Ubuntu Touch!
What? Who? Why? HOW??? Where????? Where do I downlaod latest flashableartifacts because there is now file named that. Thanks.

I am an old guy who doesn't use forums and I didn't figure out how to post correctly. If you are offended by my mistake, suck it up buttercup. Your statement offends me! Take your loosely defined code of conduct and shove it where the sun doesn't shine, babycakes!

Lakotaubp

@jbalmer From what I can see @AppLee was only trying to help by replying to one of your posts with the device link you need and pointing out in the other that posting the same thing twice is not a good idea. It makes things confusing and any discussion difficult to follow.
There is no need to be rude to anyone trying to help. We are a very diverse community covering many ages and nationalities and helping each other is why we and the forum are here. So please be kind and polite to your fellow forum users.