porting lenovo smart tab m10 plus x606
-
@fp2andfp3-user
Date of manufacture of my tablet is stated as 16/04/2021 -
@fp2andfp3-user
Well it may not work on my tablet because my tablet isn't just turned off like @Luksus but it has ROM that won't boot and that's why it's turned off. @Luksus just turned it off while his tablet is in working condition.
That's just an opinion.If his way of doing it works for you there's a good chance that I'm doing something wrong.
-
@marek_python i don't think, that you will do something wrong.....I think, that lenovo has changed something this year....mine is also New and delivered With Android 10.
@Luksus you bought it With starting system Android 9?
-
@fp2andfp3-user
I've reached out to people who maintain the downloads and recommended them to add a warning to that particular ROM for others to avoid it. That way more people won't end up with dead tablets. -
@marek_python perfect
-
@marek_python said in porting lenovo smart tab m10 plus x606:
@fp2andfp3-user
Well it may not work on my tablet because my tablet isn't just turned off like @Luksus but it has ROM that won't boot and that's why it's turned off. @Luksus just turned it off while his tablet is in working condition.
That's just an opinion.If his way of doing it works for you there's a good chance that I'm doing something wrong.
Same result game over?
-
Mine also came with Android 10 although the box says 9. I got it around April.
-
Manufacturing date of my device is 2020-10-23.
I bought it as "used".I use Linux btw., perhaps that makes a difference for spflashtool...
-
@fp2andfp3-user
Did your tablet's LED turned orange or green after charging it all night ?A guy from Lenovo's Support says we need to leave it on charger until LED turns orange or green. Then the tool will work.
I've had it charging for 2 hours now and it's still red.
-
@marek_python it was over night at least 8 hours still red
-
@luksus said in porting lenovo smart tab m10 plus x606:
Manufacturing date of my device is 2020-10-23.
I bought it as "used".I use Linux btw., perhaps that makes a difference for spflashtool...
Yes i have tried with Windows also the rescue tool!......
-
@marek_python
Hi
Sorry, if you have already tried the following, but try a forced restart:Press and hold the power button for 12 seconds = warm start
or else
Press and hold the power button for 8 sec = power offIt says so in the manual, I don't have a device.
-
I also use Linux flashing mine, Ubuntu to be exact. I used Windows for the rescue tool. Have you tried using a different combination of cable, USB port, PC, etc?
-
Do any of you have opening tools for phone repair ? I wanna try disconnecting battery and connecting it back but don't have the toolkit for it.
How about you guys ? I might have to get it from Amazon.
It's quite clear to me that mindlessly pressing the buttons won't
do it.
Let me know. -
@mario-ch thanks also 2 Minuten and sonetimes 3 Minutes with every combination
-
@FP2andFP3-User I have the same device and the firmware downgrade also bricked my device.
This guide and tool did help me to fix the problem: https://www.xda-developers.com/bypass-mediatek-sp-flash-tool-authentication-requirementTHIS TIME though! Before that tablet I also had another MediaTek device I tried to unbrick... but I made the mistake of unplugging it before that tool finished.... after that... the device was totally and forever borked.... not even the correct drivers showed up in device manager.... and Ubuntu was not able to detect the device at all... the device completely malfunctioned.
The tool will basically start the device in OEM mode ... and let's you bypass everything... so you can literally destroy everything with it. It will disable protection... and while the device is still connected, run the SP Flash Tool (I used the one provided by the Lenovo Rescue tool) and flash the correct firmware...
One last warning here:
This tool is able to make the device never recoverable! Use at own risk! -
@jiho thanks for your support.. I give it away....so I Cannot test it and have no problems any More With this device...for me this is game over
-
@luksus said in porting lenovo smart tab m10 plus x606:
What was important for my device, that I also choose the right "Download-Agent" (MTK_AllInOne_blalba.bin) from the image folder, which I wanted to flash.
Great... I thought I already know everything about flashing mtk devices...But this actually solved the error about not being able to connect ("ERROR : STATUS_BROM_CMD_SEND_DA_FAIL).
was having latest android 10 software installed and used linux sp flashtool 5.20.44. I did not try to downgrade to android 9 though.
-
@luksus Hello bro, I have trouble downgrading my tablet. It is TB-X616M, which is similar to TB-X606X. I 'Erase all' it by accident and I need a rom of TB-X606F_USR_S100168_200828_BMP, but I cannot get it. Can you send me one on mega or other drive? Thanq very much.
-
@djgun what about this: https://mirrors.lolinet.com/firmware/lenovo/Tab_M10_Plus_FHD_2nd_Gen/ ?
