Howto autostart ssh

mark1250

@chris_bavaria
Sorry, I for some reason thought you were on 20.04. I'm surprised that systemctl commands work on 16.04 which uses upstart hence the service command.

Is something else using the port 22? Does the netstat command work? - I don't have quick access to a Ubuntu Touch install at the moment so I don't know if that command is available.
netstat -tulnp

chris_bavaria

@mark1250

phablet@ubuntu-phablet:~$ netstat -tulnp
(Not all processes could be identified, non-owned process info
 will not be shown, you would have to be root to see it all.)
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 127.0.1.1:53            0.0.0.0:*               LISTEN      -               
udp        0      0 127.0.1.1:53            0.0.0.0:*                           -               
udp        0      0 0.0.0.0:68              0.0.0.0:*                              -

After I start the ssh service manually the output is:

$sudo service ssh start

phablet@ubuntu-phablet:~$ netstat -tulnp
(Not all processes could be identified, non-owned process info
 will not be shown, you would have to be root to see it all.)
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 127.0.1.1:53            0.0.0.0:*               LISTEN      -               
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      -               
tcp6       0      0 :::22                   :::*                    LISTEN      -               
udp        0      0 127.0.1.1:53            0.0.0.0:*                           -               
udp        0      0 0.0.0.0:68              0.0.0.0:*                           -

I get access via ssh, but the service is not starting on boot.
Yes, I use the VollaPhone22 with Ubuntu 16.04 (OTA-24).
In the next days, I get my new phone Pixel 3a. I go to install 20.04 and try this with my new phone. Maybe this is a issue with the port of VollaPhone22?
Thanks, I report then here my experience!

domubpkm

@chris_bavaria said in Howto autostart ssh:

Maybe this is a issue with the port of VollaPhone22?

You can ask here : https://github.com/HelloVolla/ubuntu-touch-beta-tests/issues

chris_bavaria

@chris_bavaria

The same on Pixel 3a (OTA24)

$sudo systemctl enable ssh
Synchronizing state of ssh.service with SysV init with /lib/systemd/systemd-sysv-install...
Executing /lib/systemd/systemd-sysv-install enable ssh
update-rc.d: error: Device or resource busy

Why is device or resource busy?

jezek

In the user guide about how to start ssh for 16.04, there is nothing about the systemctl command. I don't recall to use such command when enabled ssh on my FP2 a long time ago (it works after reboots). Does Vollaphone handle it differently?

chris_bavaria

@jezek
Yes, this is correct, there is nothing about systemctl.
Enabled ssh is after reboot disabled on VollaPhone, same on Pixel 3a with 20.04 (2022-W51).
Is there a solution to turn ssh service on, while booting?

jezek

@chris_bavaria said in Howto autostart ssh:

Is there a solution to turn ssh service on, while booting?

Hmm... if there is systemctl, then there has to be systemd, am I right? And if there is a systemd, then you can write a user service, which will run at boot.

If there is no systemd, then it is using upstart and you can make it run script on boot.

If everything fails try cron job on boot.

chris_bavaria

@jezek
Thanks for the explanation.
I've now read deeper and found the command for ssh in runlevel3.
This points to /etc/init.d. This is the script that starts the "OpenBSD Secure Shell server" at boot time.
According to my research, the settings for the autostart are made in /etc/init.
Since I don't want to change the script, but just want to start the service, I've included
sudo update-rc.d ssh defaults enabled the shh service (again).
After that I got this output with the following command:

phablet@ubuntu-phablet:~$ service --status-all
...
  [ + ] apparmor
  [ + ] isc-dhcp-server
  [ - ] keyboard setup
  ...
  [ + ] network manager
  [ + ] networking
...
  [ - ] rc.local
...
  [ + ] ssh
  [ + ] udev
...

Although ssh is shown as an active here, I can't access UbuntuTouch 16.04 from my client.
ssh: connect to host 192.168.188.50 port 22: Connection refused

In the systemctl I found the ssh.socket with the following command. However, this ssh.socket is not executable.

$systemctl list-unit-files --type=socket
UNIT                              FILE STATE
...
ssh.socket                          enabled
...
systemd-networkd.socket            disabled
...

I need to run the sudo service ssh start command manually to get access via ssh.

I found the startup script for ssh.service under /lib/systemd/system and it already exists.
When I run the existing ssh.service command to enable it, I get the following error:

root@ubuntu-phablet:/lib/systemd/system# systemctl enable ssh.service
Synchronizing state of ssh.service with SysV init with /lib/systemd/systemd-sysv-install...
Executing /lib/systemd/systemd-sysv-install enable ssh
update-rc.d: error: Device or resource busy
root@ubuntu-phablet:/lib/systemd/system# systemctl status ssh
Failed to get properties: No such interface ''

I see the problem in the following line:

update-rc.d: error: Device or resource busy

Is this service locked in UbuntuTouch? :frowning_face:
After the reboot I still get ssh stop/waiting from sudo status ssh. Am I missing something here?
A manual sudo service ssh start results in ssh start/running, process 7838.
Can someone confirm that the ssh service doesn't start automatically?

I'll try it now with cron job on boot, hopefully it works. But it's not such a clean solution.

( upstart works together with systemd > https://crunchify.com/systemd-upstart-respawn-process-linux-os/)

jezek

@chris_bavaria I have an FP2. I've enabled ssh long time ago, using the documentation mentioned above. The only trouble I have with ssh, is that when I enable wifi on the phone and want to connect to it (from notbook using ssh), many times the connection doesn't get through. I have to reconnect the wifi on the phone (by tapping on the connected wifi name in wifi notification area) and than it connects. No need to start service in the phone terminal.

chris_bavaria

@jezek
Is ssh automatically activated when the phone starts?

Bolly

Hi, it's probably a botched job. I'm sorry.

SSH does not start automatically on Pinephone and Vollaphone 22. It may happen on more devices, I don't know.

To solve it I created this "thing" when I played with Pinephone.

Script enabledSSH.sh

#!/bin/bash
### Enable SSH at startup in UT ###
echo "#!/bin/bash" > startssh.sh
echo "### Iniciar SSH ###" >> startssh.sh
echo "exec service ssh start" >> startssh.sh
sudo chmod +x startssh.sh
sudo mount -o remount,rw /
sudo cp startssh.sh /etc/init.d/
sudo rm startssh.sh
sudo update-rc.d startssh.sh defaults
sudo reboot

Then execute:

bash enabledSSH.sh

P.S. Rerun only when changing channels.

chris_bavaria

@bolly
THANK YOU SO MUCH ! :grinning_face:
Now runs after a reboot and is also available without unlocking the home screen.
This is a real work simplification.

Great work!

tonyr

I'm new, also running UbuntuTouch 16.04 as of this morning.

I'm wondering why this doesn't work 'out of the box', we have a /etc/init.d/ssh and it's active for the run levels we want. I've spent some time trying to trace this, without luck.

The standard hack is to put stuff in /etc/rc.local, so that's what I did in the end (service ssh start).