@triguy
Hi, can you explain the "Termux hack"?
Thanks!

UT 20.04(OTA-4) can pair to BT speakers, but Amazfit GTR/GTR2 cannot be found.
Restarting the clock and phone several times doesn't help.
Could it be that drivers for this phone are incomplete?
Bus: Virtual indicates that the device is virtual, which is unusual for physical Bluetooth hardware?

$ hciconfig -a
hci0:	Type: Primary  Bus: Virtual
	BD Address: 58:9E:C6:49:F6:8E  ACL MTU: 1021:6  SCO MTU: 184:1
	UP RUNNING PSCAN ISCAN 
	RX bytes:0 acl:201 sco:0 events:151209 errors:0
	TX bytes:92400591 acl:149914 sco:0 commands:1034 errors:0
	Features: 0xbf 0x3e 0x8d 0xfe 0xdb 0xff 0x5b 0x87
	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
	Link policy: RSWITCH SNIFF 
	Link mode: PERIPHERAL ACCEPT 
	Name: 'Volla Phone 22'
	Class: 0x4e020c
	Service Classes: Networking, Rendering, Capturing, Telephony
	Device Class: Phone, Smart phone
	HCI Version: 5.2 (0xb)  Revision: 0x1d3f
	LMP Version: 5.2 (0xb)  Subversion: 0xfff5
	Manufacturer: MediaTek, Inc. (70)

Pairing with Amazfish in UT 20.04(OTA-4) on my GooglePixel 3a works.
Has anyone had the same experiences?

@jezek
Yes, this is correct, there is nothing about systemctl.
Enabled ssh is after reboot disabled on VollaPhone, same on Pixel 3a with 20.04 (2022-W51).
Is there a solution to turn ssh service on, while booting?

@bolly
THANK YOU SO MUCH !
Now runs after a reboot and is also available without unlocking the home screen.
This is a real work simplification.

Great work!

@alter
Adding it with the paper clip doesn't work for me, but thanks.
I discovered the following and this is how I will do it in the future:

• Long click on a photo in the gallery and select multiple photos.
• Click share button
• Select Dekko 2, a new email with the attachments will open.
• Leave the email open and switch to the contact app and open the desired contact.
• Click here on the email address.
• The recipient is added to the email that is still open.

Now you can add more contacts in the same way.
Hope it helps someone.

@BodoW

Hello everyone,

I'm encountering a similar issue as @ernest. After successfully encrypting /home/phablet with LUKS, my screen remains black after restarting LightDM, although SSH access continues to work fine. This happens on my Redmi Note 9S Pro running Ubuntu Touch 20.04 OT-5.

The workaround of locking the screen (using the power button) before initiating the force-reload of LightDM doesn't seem to work reliably anymore. I suspect that something has changed in OT-5, causing LightDM not to come back correctly when it's restarted while the display is on.

Has anyone experienced similar issues with OT-5 or knows of a more reliable way to restart LightDM without the screen staying black? Any help or tips would be greatly appreciated!

Thanks in advance!

@StephPTi
Thank you!
Works like a charm.

@kristatos
Yes, both SIMs work.
I only use mobile data from SIM1 and data roaming is activated.
For outgoing calls/messages I selected SIM1.
The connection type for SIM1: 2G/3G/4G for SIM2: 2G/3G

Network provider SIM1: drei.at SIM2: blau.de
UT 24.04 (OTA-4) installed with ubports-installer

@Lakotaubp
the solution with:

sudo nano .config/upstart/gu.conf

with the content

start on starting dbus
exec initctl set-env --global GRID_UNIT_PX=28

doesn't work for me on UT 20.04 (OTA-4)
I created the ~/.config/upstart folder because it didn't exist.
Has anyone been able to adjust the font size in UT 20.04 using cli?

UT 20.04(OTA-4) can pair to BT speakers, but Amazfit GTR/GTR2 cannot be found.
Restarting the clock and phone several times doesn't help.
Could it be that drivers for this phone are incomplete?
Bus: Virtual indicates that the device is virtual, which is unusual for physical Bluetooth hardware?

$ hciconfig -a
hci0:	Type: Primary  Bus: Virtual
	BD Address: 58:9E:C6:49:F6:8E  ACL MTU: 1021:6  SCO MTU: 184:1
	UP RUNNING PSCAN ISCAN 
	RX bytes:0 acl:201 sco:0 events:151209 errors:0
	TX bytes:92400591 acl:149914 sco:0 commands:1034 errors:0
	Features: 0xbf 0x3e 0x8d 0xfe 0xdb 0xff 0x5b 0x87
	Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
	Link policy: RSWITCH SNIFF 
	Link mode: PERIPHERAL ACCEPT 
	Name: 'Volla Phone 22'
	Class: 0x4e020c
	Service Classes: Networking, Rendering, Capturing, Telephony
	Device Class: Phone, Smart phone
	HCI Version: 5.2 (0xb)  Revision: 0x1d3f
	LMP Version: 5.2 (0xb)  Subversion: 0xfff5
	Manufacturer: MediaTek, Inc. (70)

Pairing with Amazfish in UT 20.04(OTA-4) on my GooglePixel 3a works.
Has anyone had the same experiences?

@tommiedom
Does anyone have a possible solution for using an ESIM for the Fairphone 4?
Or is the best solution to use the Volla-Phone 22?

@Keneda
Thanks! I found a script on: https://forums.ubports.com/topic/1012/one-method-to-encrypt-home-phablet/33, which I will continue to pursue.
But I haven't found any newer instructions yet.
Since this is a solution almost 3 years old, I thought that there might be newer options, which may have been implemented in the operating system or created as an app.
If anyone is using LUKS encryption, it would be helpful if someone would like to share it here.

@Emphrath
Is there any news in the meantime? Unfortunately I couldn't find any instructions for LUKS encryption in Ubuntu Touch.
Which instructions for /home and the SD-card can I use?

@lduboeuf said in reject call with sms:

@Keneda said in reject call with sms:

@lduboeuf
Editing directly the file text maybe ?

Not possible as it is right now, or it would be changed for anyone.

Like we can do for messaging bubble colors ?

Where can we do that ?

With Circle Message?

https://open-store.io/app/circle-message.mivoligo

Edit: I meant like Circle Message, to edit Systeminfo

@lduboeuf
Yes, that's exactly what I meant.
Is there a config for this?
Thanks