UBports Robot Logo UBports Forum
    • 版面
    • 最新
    • 標籤
    • 熱門
    • 使用者
    • 群組
    • 搜尋
    • 註冊
    • 登入

    Oneplus 3/3T

    已排程 已置頂 已鎖定 已移動 Oneplus 3/3T
    616 貼文 76 Posters 577.9k 瀏覽 25 Watching
    正在載入更多貼文
    • 從舊到新
    • 從新到舊
    • 最多點贊
      回覆
      • 在新貼文中回覆
      登入後回覆
      此主題已被刪除。只有擁有主題管理權限的使用者可以查看。
      • C 離線
        ComLarsic @ernest
        最後由 編輯

        @ernest it says it only has an issue on the stock kernel, and it doesnt on AOSP. so it is most likely a kernel issue

        1 條回覆 最後回覆 回覆 引用 0
        • E 離線
          ernest
          最後由 編輯

          So far, no improvement between Lineage, OOS or Flash kernel ... 😕

          1 條回覆 最後回覆 回覆 引用 0
          • E 離線
            ernest @訪客
            最後由 編輯

            @ziggutas What type of network you phone is connected to : 4G, 3G, 2G for this test ?

            ? 1 條回覆 最後回覆 回覆 引用 0
            • ? 離線
              舊使用者 @ernest
              最後由 編輯

              @ernest Setting on phone has been 2G/3G/4G, data turned off. Signal from mast is patchy for 4G indoors according to provider coverage map.

              Signal does come and go here but I make sure there is plenty of signal on 3 devices (Xperia, E4.5 and OP3T) before calling. The Oneplus always seems to grab a better signal than the other two.

              Out of 7 calls this morning only 1 failed to wake phone with ringtone. However, display turned on after ending initiating call. Maybe it just needed a bit longer to connect? Most calls were connecting quickly but a couple took 16-20 seconds.

              I'm beginning to wonder if I turned off voicemail so that I could ring for longer whether the success rate would be higher? I don't have time this morning, but may try this afternoon.

              J 1 條回覆 最後回覆 回覆 引用 0
              • J 離線
                jkoel @訪客
                最後由 編輯

                make sure all partitions are ext4
                

                Can this be Undone when i want to reinstall an Android? Is it enough to flash a stock Rom using twrp?

                LakotaubpL A 2 條回覆 最後回覆 回覆 引用 0
                • LakotaubpL 離線
                  Lakotaubp @jkoel
                  最後由 編輯

                  @jkoel Yes that can be done if needed.

                  J 1 條回覆 最後回覆 回覆 引用 0
                  • J 離線
                    jkoel @Lakotaubp
                    最後由 編輯

                    @Lakotaubp and how can i do this?

                    LakotaubpL 1 條回覆 最後回覆 回覆 引用 0
                    • LakotaubpL 離線
                      Lakotaubp @jkoel
                      最後由 編輯

                      @jkoel Not done it myself but a web search should find all details you need. The OnePlus site should have OS and reinstall twrp with fastboot and use that. Someone else will probably have all the exact details.

                      1 條回覆 最後回覆 回覆 引用 0
                      • A 離線
                        andybleaden @jkoel
                        最後由 編輯

                        @jkoel Yes with twrp as you did but in reverse but you need to remember what the file system was in the first place!

                        I got my Nexus 4 then 5 then FP2 then one plus cooking on #UBUNTU via @ubports and have run it on Op3T Op6t OP5T Pinephone/Pro Pine Tab and Pinebook Pro and my favourite OnePlus One.

                        1 條回覆 最後回覆 回覆 引用 0
                        • D 離線
                          domubpkm @vince1171
                          最後由 domubpkm 編輯

                          @vince1171 Hello.
                          I don't own (yet) Oneplus3 so these two questions are for information:

                          • Is the status working/missing up to date?
                          • do you think you could make the fingerprint sensor mechanism operational within a certain period ? Mechanism not very common under UT to date.
                            Thank you.
                          1 條回覆 最後回覆 回覆 引用 0
                          • flohackF 離線
                            flohack
                            最後由 編輯

                            @vince1171 what do you think, should we make a device-specific project in Gitlab like for the pinephone, so we do not have to use the main tracker on Github, plus you can place documents there, READMEs and files to download?

                            Like we did for the Pinephone: https://gitlab.com/ubports/community-ports/pinephone/

                            My languages: 🇦🇹 🇩🇪 🇬🇧 🇺🇸

                            LakotaubpL 1 條回覆 最後回覆 回覆 引用 2
                            • LakotaubpL 離線
                              Lakotaubp @flohack
                              最後由 編輯

                              @Flohack It would certainly make things easier to keep track of.

                              D 1 條回覆 最後回覆 回覆 引用 1
                              • D 離線
                                domubpkm @Lakotaubp
                                最後由 編輯

                                @Lakotaubp Yes. As much Readability as possible at all levels.

                                1 條回覆 最後回覆 回覆 引用 0
                                • ? 離線
                                  舊使用者
                                  最後由 編輯

                                  After disable/enable wifi I can't find any network. Air-plain mode on/off doesn't fix it. I have to reboot my 3T. Anyone else with the same issue?

                                  LakotaubpL ? P 3 條回覆 最後回覆 回覆 引用 0
                                  • LakotaubpL 離線
                                    Lakotaubp @訪客
                                    最後由 編輯

                                    @thilov Occasionally on the OP3 mind you it also happened on the OPP at times too.

                                    1 條回覆 最後回覆 回覆 引用 0
                                    • ? 離線
                                      舊使用者 @訪客
                                      最後由 編輯

                                      @thilov Toggling the wifi button on and off works pretty good on my 3T but sometimes (I think this is usually after a restart or coming out of flight mode) I have to go into system settings for wifi where I find it has created a duplicate network, ie: network and network (1). Erasing the duplicate allows the usual networks to be presented when going back to the pull down menu.

                                      1 條回覆 最後回覆 回覆 引用 0
                                      • P 離線
                                        pglushkov @訪客
                                        最後由 編輯

                                        @thilov said in Oneplus 3/3T:

                                        After disable/enable wifi I can't find any network. Air-plain mode on/off doesn't fix it. I have to reboot my 3T. Anyone else with the same issue?

                                        Hi! I consistently get similar error every time I update the system. First time it starts after the update WiFi never works, no matter what you do. Toggling airplane-mode does not help either. Then with a second restart - all works fine with no actions needed.

                                        1 條回覆 最後回覆 回覆 引用 0
                                        • G 離線
                                          gac6 @flohack
                                          最後由 編輯

                                          @Flohack Can you explain a little bit more how to install anbox in the oneplus 3t? I am trying to install it, but I am a little bit lost.
                                          Thanks

                                          flohackF 2 條回覆 最後回覆 回覆 引用 0
                                          • flohackF 離線
                                            flohack @gac6
                                            最後由 編輯

                                            @gac6 it needs kernel patches firsthand, are you sure that @vince1171 has integrated them already?

                                            My languages: 🇦🇹 🇩🇪 🇬🇧 🇺🇸

                                            E 1 條回覆 最後回覆 回覆 引用 0
                                            • E 離線
                                              ernest @flohack
                                              最後由 編輯

                                              @Flohack
                                              I guess so : https://github.com/Halium/android_kernel_oneplus_msm8996/commit/0abee3d069b71e9ad679d28318faa6eca33777d3
                                              Didn't try yet.

                                              1 條回覆 最後回覆 回覆 引用 0
                                              • 第一個貼文
                                                最後的貼文