sagrotan

sagrotan

Yes, it works!!! I have just inserted the SIM Card and can make phonecalls ;O) Network also works.
The only thing is a high energy consumption, but I think I can live with that.
Yip yip hurray - this was my first experience flashing a ROM ;O)

best regards
sagrotan

sagrotan

@flohack That would be great nice and phantastic ;O) !!!

sagrotan

@flohack @flohack Okay, I have tryed to flash without the BLOD Workaround and than it went really wrong (Android symbol with a warning triangle with exclamation mark. Under it was written "no commands").
After that I have tryed the BLOD Workaround and the special TWRP (found on XDA-developers). Now it is working, but with my hated Google Android...

You have written, UT is working only with a special Kernel in this case... It sounds like much work for a "mobile" telephone box... but, is there a Kernel for this case to download?

Best regards

sagrotan

thanks for the replies. The battery should be okay - it was changed before 8 months or so. It was only strange, that this failure happens when the battery was nearly empty while UT was running... I will try to reinstall without wiping data ;O)

Best regards
sagrotan

sagrotan

Hallo,
UT was working properly for half a year on my Nexus 6P. Yesterday the battery was nearly empty. So I have connected it to the charger. After a while it seems it has rebooted on it's own and since than it stucks in a bootloop?!
I have entered the bootloader - but following options are not working: Reboot Bootloader, Recovery Mode, BP tools, Start (all are ending in bootloop)... After powering it off and start it again -> Bootloop.

It is strange - I have not done any updates in the last view days....
Maybe someone has a tip?

regards
sagrotan

sagrotan

Hallo,

I was reading a lot about the new lapdocks... I have the old one from Motorola. Is it possible to connect one of the Nexus devices to the motorola lapdock? Maybe someone has made a attempt ;O)
regards
sagrotan

sagrotan

... Strange, but after some days I have tryed again to start bluetooth and it was on?! Now also bluez has started.
Is it possible the app "bluetooth file transfer" is not available for the nexus 6p? It is not listed in the OpenStore. Is there another way to send / get files via bluetooth?

sagrotan

Hallo,
I have installed ubuntu touch on a nexus 6P and have some problems.. So I have brought as an experiment a nexus 5, that is better supported.
The installation was on the first attempt problematic (installer hangs on "preparing system-image" for over half an hour. So I have copied the log file of the ubports installer in process to the desktop to check if something happens. Timestamp from 18:43).
After sometime I have stopped the installer and checked the logfile - and now the entries differ! A whole number of entries are missing?! (last log 19:30)

After that I have started the Installer again and within 5 minutes the installation process has been processed successfully (and overwritten the logfile)

Conclusion:
It would be nice, if the installer would be more verbose (what was happening behind the sceen)
It would be nice to know WHICH steps the installer has to execute, so everyone would know what should happens next.
Additional it would be nice to know the approximate time for each step, so someone would know it is working or hanging ;O)

These are only ideas of a person who has less experience with a new system, but an Installer who is not working always properly should give more output.

And as a last item: it would be nice if on availible device list, it would be announced what was included in the percentage of what was working and in the percentage what was not working ;O) It was realy hard to find these infomations.

And as a last thing: ubuntu touch works realy nice on an Nexus 5 ;O)

regards
sagro

sagrotan

Hallo,
I have problems with bluetooth connection... First time I wanted to connect to another device the bluetooth switch turned automatically from on to off after a view seconds. After several reboots it stayed on. When I connect to another device they are pairing but then the file transport was unsuccessful. It seems the Nexus 6p was refusing the files. The other device gives the error "incorrect pin or passphrase wrong ".
After a reboot the nexus has the first error (turning automatically from on to off). Logs:
From file /home/phablet/.cache/upstart/indicator-bluetooth.log:
** (process:5982): CRITICAL **: rf_kill_switch_real_try_set_blocked: assertion 'tmp1 != tmp2' failed

** (process:5982): CRITICAL **: rf_kill_switch_real_try_set_blocked: assertion 'tmp1 != tmp2' failed

In system logs:
From file /home/phablet/.cache/upstart/application-legacy-ubuntu-system-settings-.log:
QObject::startTimer: Timers cannot be started from another thread
Couldn't register agent at /com/canonical/SettingsBluetoothAgent/adapteragent
Releasing device model ..
file:///usr/share/ubuntu/settings/system/qml-plugins/bluetooth/PageComponent.qml: QML Item: Cannot anchor to an item that isn't a parent or sibling.
Failed to register our agent with BlueZ: "Already Exists"
QObject::killTimer: Timers cannot

Has someone any idea what went wrong?
Sagrotan

sagrotan

Yes, it works!!! I have just inserted the SIM Card and can make phonecalls ;O) Network also works.
The only thing is a high energy consumption, but I think I can live with that.
Yip yip hurray - this was my first experience flashing a ROM ;O)

best regards
sagrotan

sagrotan

Another strange thing: Ubuntu Touch is working, but when I shutdown the nexus and boot again, first comes the message " "Your device software can't be checked for corruption..." than the Google Logo and after some seconds ubunt touch starts? It seems I can't get rid of google ;O)

sagrotan

@sagrotan

Best posts made by sagrotan

Latest posts made by sagrotan