@Keneda, yea, I had such high hopes back in 2015. I bought the Nexus especially to put UT on it. I had an Ubuntu Phone at the time too. It looked like I was breaking out of the Google-sphere, only to be sucked back in by the monster
Posts made by ScottishFreedom
-
RE: [Solved] Nexus 10 with old version (2014) of UT on it - anyway to update it?
-
RE: [Solved] Nexus 10 with old version (2014) of UT on it - anyway to update it?
I can't edit my OP, I guess due t anti-spam measures...
UPDATE (26/4/2020): I resolved my issues by installing stock Android back on to the Nexus 10.
My problem with getting remote access to the Nexus 10 was a mixture of a bad USB cable and/or USB port. I also had to activate "Developer mode" on Ubuntu Touch: Settings > About Tablet > Developer Mode. Once I got a connection the command: adb reboot-bootloader worked.
I installed the stock Manta image (as below). I had to remove the -w from the flash-all.sh and then the image installed. I've got a shiny Nexus 10 to use again.
BACKGROUND
I can get into the Ubuntu Touch recovery mode, version: (CWM -based) Recovery v6.0.4.6, on the Nexus 10, using the key combination: hold down both up and down volume buttons and then press power button.
I have followed the following post but Iām stuck at the command: adb reboot-bootloader - How to restore Android.
Regarding which version of Android to restore onto the Nexus, I have downloaded a copy of stock Manta from here, which, when unzipped, includes the flash-all.sh script.
-
RE: [Solved] Nexus 10 with old version (2014) of UT on it - anyway to update it?
Hey, after activating Dev Mode, and trying a couple of different USB cables, things worked out. The only other sticking point was that I had to remove -w from flash-all.sh and then the stock image installed fine. I'm super happy to have my Nexus 10 up and running again after 5 years in a box. Already getting lots of use out of it Thanks for your help. I don't think I would have found Dev Mode otherwise I'm going to update my OP and add the solution.
-
RE: [Solved] Nexus 10 with old version (2014) of UT on it - anyway to update it?
UPDATE: found it system settings > about phone > developer mode
-
RE: [Solved] Nexus 10 with old version (2014) of UT on it - anyway to update it?
@Keneda said in Nexus 10 with old version (2014) of UT on it - anyway to update it?:
Dev mode for USB
How do I activate USB dev mode on the UT Nexus 10?
UPDATE: found it system settings > about phone > developer mode
-
RE: [Solved] Nexus 10 with old version (2014) of UT on it - anyway to update it?
Thanks @Keneda and @hankschwie
I have started a thread on XDA, here: https://forum.xda-developers.com/nexus-10/help/how-to-restore-android-nexus-10-version-t4088061
When I do: adb devices, no devices are listed!?
Any ideas?
-
RE: [Solved] Nexus 10 with old version (2014) of UT on it - anyway to update it?
@Lakotaubp hey, I'm just coming back to this now I have some time on my hands! Any pointer to where to start with putting Android back on? After my previous post I did spend some hours researching how to do but didn't get anywhere. I pointer on where to start would be so helpful - thanks.
UPDATE: I can get into the UT recovery mode (CWM -based) Recovery v6.0.4.6!
-
RE: [Solved] Nexus 10 with old version (2014) of UT on it - anyway to update it?
Hi @Lakotaubp , yes that's right, it must be the original Canonical Ubuntu Touch on it. Thanks for confirming what I feared.
-
[Solved] Nexus 10 with old version (2014) of UT on it - anyway to update it?
Hi, I have an Nexus 10 with an old version of UT on it that I installed in 2014 (does my memory serve me!). I have searched on the forums here and it looks like the Nexus 10 was dropped as a development platform in 2017. Is there any thing I can do with my trusty Nexus 10 to bring it back to usefulness with UT? Or is it a case of just trying to get Android back on to it? Thanks for you attention.