Cannot install ubuntu touch on BQ M10 ubuntu edition
-
@lakotaubp No openstore on tablet. Am I not getting something here? This is a brand new M10 from BQ : ubuntu edition.Obviously I can go to openstore via browser, download terminal for vivid, which I have done, but lack terminal to install!
-
@ziggutas Your tablet is still on the original canonical Ubuntu touch, yes. With developer mode on. And the above instructions will not open the bootloader to access fast boot. Is that correct, still.
If nothing works can you do a full factory reset(again) so you have a clean setup and confirm all is as you got it and it sets up OK. Feel like I'm missing something very obvious -
@lakotaubp Tablet on original canonical ubuntu as supplied by BQ,yes, with developer mode on, yes.
I reset device again earlier and it looks the same; although I couldn't swear to it.
I've taken a picture of the apps scope , but don't know how to post it. -
@lakotaubp And yes, above instructions will not open bootloader etc.
-
@ziggutas No need really that side is not working now. Ubuntu one account set up? As you will need that later for ubports
-
@lakotaubp Ubuntu one account set up on tablet, yes.
-
@ziggutas OK at least that works : ) Going to have a think for a bit now because this should be fairly straight forward.So not ignoring you just thinking.
While I'm away look up Ubuntu terminal commands you want something that will force/put a device into bootloader maybe like sudo adb device fastboot etc and just try them in mint or Ubuntu you never know.
Stuff to do today back later -
@lakotaubp OK. Thanks, will do.
-
Try these might help haven't read most of it. Remember that what works on bq phone should work on the m10
-
@lakotaubp Thanks for your help over the last few days but I can't do any more;it's doing my head in. adb can see my phone but not the tablet. Pressing buttons will not get anywhere. No terminal or file manager on tablet. No way to update tablet or install software, as far as I can tell. It all looks a bit too difficult. I'm going to put the tablet in solitary confinement for a while and maybe and try to sort out a few problems with the phone!!
Bye for now.
-
@ziggutas I'm reading some issues now and this grabbed my attention https://github.com/ubports/ubuntu-touch/issues/802
This is the first time I've read such thing but maybe this is the source of all your troubles... and the solution! In short: you need to use usb 3.0 to install UT on a BQ M10
-
@advocatux That was a timely reply; the sledgehammer was literally 5% off the vertical above my head. And M10 about to get it!!
No, seriously, that is very interesting. I have had a few problems with portable discs and usb 2.0 vs. usb 3.0 before.
I will give it a try later, the laptop has a usb 3.0 port.
Fingers crossed.
Thanks. -
@ziggutas good luck !!
-
@advocatux thanks again lets hope that's all it is.
-
@lakotaubp No go. All the same things not happening. ADB not detecting the tablet. That's it for now. If I can find somewhere to purchase a good quality cable and try that, maybe I'll give it another go. I feel that the tablet is fluffed up somehow from earlier efforts. I have no problems connecting bq phone with al the same cables and adb responds instantly. So it has to be tablet.
Might try on another machine when I get the chance. -
@ziggutas have had a look around and this problem has occurred before and the fix has been sketchy to say the least. But don't dispare it has been fixed in the end. Though many have felt like you i.e pass me the hammer and make it a big one
.
One option has gone Magic Device Tool is dead now. Another option maybe as you hint to reflash the original Ubuntu touch with SP Flashtool.
Your doing the right thing for now put it in a dark place and forget it for a bit. We will return and Ubport its little chips later. -
@ziggutas If you haven't sorted this yet perhaps try
sudo apt install android-tools-adb
sudo apt install android-tools-fastboot
sudo apt install phablet- toolsThen use the.deb installer. This was suggest by Lionelb on the Telegram install group for someone who was struggling with the install.
-
@lakotaubp Not sorted yet, no. I have been in touch with BQ who try to be helpful, but not as far as ubuntu is concerned.
They suggest that recovery partition may be broken. They will not supply any firmware or info, all links to potentially useful stuff on their websites and forum come to dead ends where page is blocked or deleted. Feels like they have developed an ubuntu allergy! My opinion is that they should not be selling this tablet without pointing out that it has no terminal or file manager installed etc. I got no response to that.Anyway, thanks for the latest suggestion; will look at it tonight.
I will have to research .deb installer and look for step by step instructions, so will go first to Telegram group. -
@ziggutas .deb installer should be on the normal installer page. Yes had heard a lot if Ubuntu bq related stuff had disappeared. Yes try the telegram groups theres been a lot of chat on there about m10s recently.
-
i made a rough video of how to use BQ tools (on win 10 unfortunately) to flash only the twrp recovery (renamed to recovery). you then need to reflash UT recovery to get ota updates,
Stefano helped me with this a while back .
the flashtool doesnt care about fastboot ,be careful do not use the format option.
you will see a Brom error at the end of the video, i did not have a device connected.
https://drive.google.com/drive/folders/1u4zVdyr7nbPOK2RJMfRK0PzIVVPwrxp-?usp=sharingwith the flash tool ,only have the recovery check marked (ticked), use the download setting.
you should have the sound on ,do all the flashtool settings then press the download (next to the stop button ,then plug in and listen to it, with your device turned off. the flashtool is triggered when you plug or unplug, and turn it on or off
