PinePhone

admsjas

i just loaded 233 build and flashed to the emmc. when i went to change the password i get the error:
passwd: Authentication token manipulation error
passwd: password unchanged

AppLee

@admsjas
I don't see a question here and this is not the thread purpose.
Please check the gitlab for opened issues and post yours : https://gitlab.com/ubports/community-ports/pinephone/issues?scope=all&utf8=✓&state=opened

And try to give more details and check for reproduction.

As much as I can, I force myself to reflash with another build which I think worked ; then test.
Then reflash with the build I suspect is not working and check again.

Sometimes flashing errors occurs... Or I was the problem

admsjas

i thought this was the place to discuss thing regarding UT on pinephone if not my apologies. the issue was the same running from sd card and from the emmc

PINE64

Today's build brings many new improvements to the PinePhone, including performance and the modem automatically starting at boot (as well as auto-rotating the display - although I haven't gotten that working just yet).

AppLee

@PINE64
Oooh nice
I can't wait to go back home and test it

Marathon2422

@AppLee
#244 I had the wifi disconnect after making a call.
#246 ,,i had to move to a strong signal area to connect cell, after that ,it worked in usuall locations.
Sound quality is good
Screen brightness , set about 3/4 ,( in bright light , difficult to see )
Now to put it on the emmc

darkeye

If this would help anyone i made a small script to decrease the power draw of the pinephone until it would be adjusted in th main repo....

#!/bin/bash

loadAVG=$(cat /proc/loadavg  | awk '{print $1}')
threshold=1
highthreshold=3
status=$( echo "$loadAVG > $threshold" | bc )
highstatus=$( echo "$loadAVG > $highthreshold" | bc )

echo $status

if [ $status -gt 0 ]; then
        if [ $highstatus -gt 0 ]; then
                echo "performance" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
        else
                echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
        fi
else 
        echo "powersave" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
fi

I've placed it in crontab at adjust the governor every minute not ideal but it does help alittle...

(you do have to install 'bc' for it to work : sudo apt install bc)

Marathon2422

i checked mine recently , about 30% in 2 hrs , (not being used)

ricardo65

@PINE64 I would like to know when the pinephone can be purchased again and with which capacities of 2gb-16 or 3gb-64

PINE64

@ricardo65 We'll have some announcements coming soon

AppLee

That's how you make a teaser @PINE64
Can't wait !

domubpkm

@AppLee Yes, that's the kind of answer that's probably going to drive people crazy (especially if they're confined to their homes like so many people in the world).

ricardo65

@PINE64 We'll be waiting. Thank you very much.

trainailleur

@PINE64 said in PinePhone:

@ricardo65 We'll have some announcements coming soon

So you're saying we should stand by for the 8GB/256GB Rockchip version? :face_with_tears_of_joy:

domubpkm

@PINE64 Hi. At this point, what is the most advanced esploitation system on the pinephone ?

AppLee

@domubpkm
Mirror on the wall, who's the prettiest of the realm... :face_with_tears_of_joy:
Beware you may not like the answer

AppLee

@domubpkm
News is still fresh but going viral : https://ubports.com/blog/1/post/271

trainailleur

@AppLee said in PinePhone:

@domubpkm
News is still fresh but going viral : https://ubports.com/blog/1/post/271

I updated the OP with that and with the screen protector info you posted elsewhere. Thanks!

Marathon2422

ordered my community edition , only extra $25.00 for DHL.

i had fun finding the ordering part of the page , got there by clicking on MORE, at the bottom of the page,
( could be frustrating) ...........

ricardo65

@Marathon2422 I went to the site to buy the community pinephone and it only comes out to pay with paypal.no you can pay with normal credit card ?