Smartwatch sync app

magnargj · 17 Sept 2021, 18:12

Installed the app on my Nexus 5 today, and it works like a charm. Connected through the app at second attempt. So far I have not been able to connect with my Xiaomi Mi A2.

Lakotaubp · 19 Sept 2021, 10:10

The one thing I have noticied is that the initial connection is now quicker and lasts longer on the OP5 with 1.4 Once that connection drops out it will not re-connect. The OP5 says connected for about a second then it drops out. So without investigating further I suspect the PineTime is rejecting the connection, which is a known issue at ther end.
Still no connection on PinePhone but that may be a permission problem with the phone also known about.

Emphrath · 20 Sept 2021, 14:07

Hello ! I don't know if that's any help but I tried your app on a Garmin smartwatch. It's detected under a different name (which I guess is the BT dongle or sth) but i does connect to some extent: sometimes through the normal connection process, sometimes when the watch isn't in pairing mode (but BT on, of course).
In both cases, the app doesn't seem to access the data - it displays heartrate and steps monitor, but that's it - they're empty. On another hand I don't use smartwatches usually, so maybe these are data that only display after some time on the phone. Anyway that's a great initiative, best luck !

jiho · 20 Sept 2021, 21:15

@lakotaubp That is good to know! I need to test it on different devices, I haven't been able to connect with 1.3.0 at all.
There seems to be a problem with the PinePhone in general at the moment.

jiho · 20 Sept 2021, 21:16

@emphrath Hi, it is good to hear, that the app is able to connect! Heart rate and steps won't be able to sync, as no UUIDs have been added yet. If you are able to extract the UUIDs we can try adding it as a device.

Lakotaubp · 21 Sept 2021, 04:04

@jiho Connection with 1.3.0 was more hit and miss for me too. 1.4.0 works a lot better but that rejected connection is an issue .

magnargj · 21 Sept 2021, 11:08

@magnargj Today I succeeded connectin with my Xiaomi Mi A2 for the first time. I have no idea what has changed. It was with firmware 1.4. With the pinephone (siglo) I did not succeed today.

jiho · 5 Dec 2021, 23:10

In InfiniTime 1.7.0 the characteristic to sync the step count was added.

The app is now capable of syncing steps:

At every sync the app will sync the steps that were added since the last sync
If the amount of steps is smaller than the currently saved ones, it will sync the total amount of steps, as InfiniTime does not retain the steps after a reboot.

Also the app will now not sync empty values or "0".

You might have to sync twice after updating the app to first update the device revision, as the app will now check if a characteristic works for the installed firmware version.

Lakotaubp · 6 Dec 2021, 06:01

@jiho Sorry not been around much for the last week or so. Do you mean your app will now sync steps or that the last Infinitime version now syncs steps. Also have there been updates to your app, if so do you have the link?

jiho · 6 Dec 2021, 07:31

@lakotaubp Don't worry, I wasn't around for a long time either.

I mean both. Infinitime now lets you sync the step count and the app will also do it.

Take the latest build from here: https://gitlab.com/jiiho/uwatch/-/jobs/1851724064/artifacts/download?file_type=archive

Lakotaubp · 6 Dec 2021, 08:32

@jiho Thanks will give it a go.
Edit: All works, I now have steps. Like the app icon too. Great wirk thanks

Lakotaubp · 2 May 2022, 05:42

@jiho Was just wondering how this was developing and if it was close to being in the OpenStore. Thanks

jiho · 27 May 2022, 21:33

@lakotaubp Sorry for the late reply. (And missing news in general)

To be honest I ran into some problems with the current version of bluez.
Pin verification will be made mandatory in Infinitime at some point. As this functionality is already included in the System Settings, I wanted to use it, to pair and verify the watch and then use it in the app. That would also provide an easy way to automatically connect to the watch. Gatttool however is not able to enter existing bluetooth connections and the implemented version of bluez is not able to handle GATT very well or at all (never actually got it to do what I want).

So to work around some things, I started to rethink the backend and am currently working on that.

Also I want to see what I can do with the upcoming 20.04 base as hopefully the bluez version will be able to handle the requests way better.

Lakotaubp · 28 May 2022, 04:23

@jiho Thanks for the update and work.

Lakotaubp · 5 Jun 2022, 16:52

@jiho The link is 404ing is there a fix coming https://gitlab.com/jiiho/uwatch/-/jobs/1851724064/artifacts/download?file_type=archive Thanks

jiho · 6 Jun 2022, 21:25

@lakotaubp Sorry, I moved to project to a group in GitLab (to have all UT apps in the same place).

You can find the latest builds here: https://gitlab.com/jiiho1/uwatch/-/pipelines

The latest build (a few minutes ago) should be one last one you already have (with clickable 7 build).

A lot more changes are currently happening in the branch "movetojs", however not everything is working in there yet.

Lakotaubp · 7 Jun 2022, 04:21

@jiho Thank you for the info

Phiibuntu · 10 Jun 2022, 09:13

Hi, I would try Uwatch, but I can't find how to install it.

Someone can give some tips? please?

Keneda · 6 Oct 2022, 13:39

@phiibuntu
I think you have to download source files and build the click yourself. Then you can install click using UTTT.

I searched a bit the git given above for a click but didn't find any.

jiho · 10 Jun 2022, 14:24

@phiibuntu You can download build artifacts from here: https://gitlab.com/jiiho1/uwatch/-/pipelines

You'll be able to download a ZIP file that contains the click package. You can install it either with UTTT or opening it with the Open Store.

Beware however... I am currently rewriting a huge part of the backand in 'movetojs'. So make sure to download the artifact from 'main', because some things are not yet working in 'movetojs'.

If needed I can also build a package for you.