OnePlus just informed me they will NOT unlock bootloader for a device on bought on Ebay.
-
@oldbutndy That confirms it's not working as expected. I will let Ruben know. It seems token is needed for now.
-
@rocket2nfinity said
@oldbutndy The one from the Devices page, or the manual instructions from his page
Yes, that is the one I had found & merged the OEM T-Mobile BE2028 info into, then renamed it from global to the T-mobile name, and installed it (No more T-mobile logo at boot) & booted OK, but still boot loader locked, and requesting token.
-
@oldbutndy you can try the EU version, from there you can flash firmware directly from OS. (EU version can flash an OTA file from android)
so get an OTA update and check if it overrides fastboot to something useable then take an OTA that does and flash it (if its version is older then what you have then do the proccedure with an older EU ROM)this is the only thing i can think of short of cracking the phone open and starting to dump chip data, or if you can dump NAND dump from there and try to manually patch firmware directly. (after all theres a boolean somewhere for bootloader unlocked y/n)
-
@ChromiumOS-Guy said
@oldbutndy ...
this is the only thing i can think of short of cracking the phone open and starting to dump chip data, or if you can dump NAND dump from there and try to manually patch firmware directly. (after all theres a boolean somewhere for bootloader unlocked y/n)If I had an unlocked BE2026, I could try NAND dump, then change to locked & dump again, then compare the 2 files, & look for single changed bit ?
Otherwise, how would I know which bit to change on a BE2028 ? -
idonthatevests said in OnePlus just informed me they will NOT unlock bootloader for a device on bought on Ebay.:
@oldbutndy > Some N10 models can be unlocked without requesting a vendor key.
MODEL BE2026 - factory non carrier locked model for USA
UPDATE: as of 2026 Jan 27, there is a seller on ebay offering MANY factory sealed New-In-Box BE2026.
Seller has tested a few units, by charging, and batteries seem OK. (100% charged). Replied quickly and thoroughly to my questions so far. GOOD !
My hesitations: brand new seller (0 feedback as of this morning), no returns, & 2x average price of 10 recent used BE2026 sold over past 45 days on ebay (usually under $100, unless already converted to UT).
One more hesitation: IF 1+ 8 Pro gets UT port, it would be better for my needs than N10 (faster CPU & wired ext display, etc), so I would rather buy used 8 Pro than new N10, if similar price. -
@oldbutndy not really it would help a lot yes but you can use standard reverse engneering software to check it, also engneering roms have unlocked bootloader so you just compare that to the oldest release if an engneering rom exists.
-
@oldbutndy i dont think a port will just happen somebody needs to activly work on it, with amount of money you spent on N10s if you sell those and buy a used Fairphone it would be better.
-
@ChromiumOS-Guy said in OnePlus just informed me they will NOT unlock bootloader for a device on bought on Ebay.:
i dont think a port will just happen somebody needs to activly work on it
That's true, but from what I heard, that is happening. Well, at least for the 8 and 8t. Haven't heard about the 8 Pro.
-
@ChromiumOS-Guy said
@oldbutndy not really it would help a lot yes but you can use standard reverse engneering software to check it, also engneering roms have unlocked bootloader so you just compare that to the oldest release if an engneering rom exists.
I actually spent more time looking into this yesterday. I did sequential question search using google AI, and asked about finding a bit to change, etc. The answers sounded reasonable (AI is sometimes very good at that, so I am not sure if all were true ...) For one thing, it said the setting was in special partition. It might have said encrypted. And that the special protection firmware in the T-Mobile models check any changes to that partition. I saved the interaction to a file, but have not edited it for clarity yet.
But it was convincing enough to completely give up on BE2028, and the Metro model (# ?). -
@oldbutndy i actually know the partitions youre looking for because I had to recover IEMI (a whole other can of potentially ilegal worms) you want to mess around in nvdata/cfg/ram i doubt it but you can check protect1/2 (sometimea called R/L) most likely its in some sort of *loader.bin i tell you the bootloader configs usually sit in some preloader so check for that.
-
@ChromiumOS-Guy
Thank You. I might follow that up when I have a bit more time & energy.
I bought an easy-to-unlock BE2026 via Ebay, which arrived a couple days ago, and got UT installed.
I still have a BE2028 to try to unlock. Not worth a huge effort now, though. -
Thanks for all the helpful knowledge and suggestions you've provided all over the forums. I've learned so much.
Just an update. I recently tried to unlock a OnePlus Nord N10 5g phone. Unfortunately, OnePlus didn't give me an unlock token and I tried the recommendation of using oppo decrypt/encrypt to use the Global BE2026 firmware and package it as BE2028 (Project ID=20888) to match the phone model in hopes that the Global firmware would allow the option to directly unlock the bootloader from the phone or adb/fastboot (e.g. without requiring/begging OnePlus support).
I was able to use oppo decrypt/encrypt and built the new .ops file. MSMDownloadTool applied the fireware to the phone without issue. However, it did not allow unlock directly from the phone (still needed OnePlus support to send me an unlock token).
I may give the N100 a try since it seems this model did allow the unlock directly for you (e.g. OnePlus Support not required). It seems more and more, vendors are putting the cab-bash on giving out unlock tokens. I'm interested in trying on a phone where I definitely do NOT need vendor to unlock.
As a side topic, I did see an announcement recently that in 2027, Motorola will release some models (didn't say which ones) with Graphene OS. So, that is promising for the future.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login