Mobile data usage monitoring (dataMonitor app)

rocket2nfinity

@matteo When I tried to find that log, with log viewer, it tells me 'no logs found for the set filter'. Should I be looking under another location other than the default upstart?

Specifically i'm looking for band, provider, strength info for cell, and the equivalent for WiFi

matteo

@rocket2nfinity the mattdaemon.log is located at .cache\upstart directory. However, I think only information regarding provider is included in there among your requirements. I don't even know if it's possible to have the other information, but I'll better investigate.

matteo

@rocket2nfinity the information for the current network in the app are withdrawn mainly using the following Qt functions:

I don't see there other information such as band, provider or strength info for cell to be displayed. But if you have a suggestion in this regard, please be my guest :).

Thank you.

Matteo

matteo

New app version 0.1.9.6 is now available here. My intention is now to issue two or three additional versions prior to get to the final 0.2.0, which I believe will be the eligible version to be published in the OpenStore. I have just small modifications still missing, only to make the app as polished as possible before publishing, therefore I think it will be a fast process to get to the final version.
Here below the current change log:

-Version 0.1.9.6-

Slight modifications to Actiondaemon.cpp and Daemon.qml files to further fix issue #5 "Inconsistent values (even negative)", still causing the indicator to show negative values for a small time step at every reboot.
Added switcher options in 'Settings' to be able to choosing the data for SIM and Wi-Fi to be displayed in the indicator. This is a specific user request (for details see issue #6 "Select which data appears in notification bar").
Removed few dividers from the Settings page to meeting suggestion raised with issue #4 "suggestion: remove some dividers".
Graph bars better centered inside relevant days gaps.
Indicator icon updated. Now this is hand made by the app author and not anymore provided as a default one (thanks to @abmyii for the hint).
Thanks to a hint from @Danfro (Daniel Frost), now the Settings page scrolls down immediately to display a message.

Any feedback on the current status of the app is always welcome.

Thank you.

matteo

New app version 0.1.9.7 with .click files for arm64 and armhf architectures are now available here.
Find below the current change log;

-Version 0.1.9.7-

Modification to mattdaemon-service.conf to be able to trigger the executable Actiondaemon file when rebooting the device; this is useful to resetting the daily received data soon after rebooting without waiting anymore for a transition time to occur (equal to the daemon time step, set in 'Settings'). For users who have previous versions of the app installed, once updated the app to the present version, the current stored mattdaemon files shall be manually removed, by heading to 'Settings' and pressing the relevant button provided to remove the daemon files. Afterwards, closing and re-opening the app automatically would restore those newly updated files to their correct location. A subsequent device shutdown and re-boot will eventually bring this file in normal operation.
Added a lock in Settings for the daemon time step, to avoid changing this option by inadvertently touching the slider.

Any feedback on the current status of the app is always welcome.

Thank you.

matteo

New app version 0.1.9.8 with .click files for arm64 and armhf architectures are now available here.
Find below the current change log:

-Version 0.1.9.8-

Added a second button in Settings to set a daily switch threshold for the app Theme, other than the nightly switch already available.
SIM and WI-FI received data recap in the app Main page is now updated every time going back from the Graph page.
Fixed error thrown when a database of data thresholds isn't yet created. This is useful to cleaning up the mattdaemon.log from undesired error report, which wasn't preventing the app to correctly work though.

Any feedback on the current status of the app is always welcome.

Thank you.

matteo

New app version 0.1.9.9 with .click files for arm64 and armhf architectures are now available here.
Find below the current change log:

-Version 0.1.9.9-

Message bubble implemented for the graph, to display data usage for each data bar, just tapping on the concerned bar. This is deliberately taken from the Talaan app made by Kugi Eusebio @javacookies. Thanks Kugi for your work.
Main page and Chart page are now able to update theirs figures and chart automatically (every 10 seconds), the latter without the recourse to an update button, implementing the .qml 'Timer' cycle in the code. Because of that, for Chart page the update button on the top right hand side of it was deleted.
Added mattdaemon status in the Indicator panel to acknowledging if the daemon is Active or Inactive.
Refresh time in mattdaemon.conf file is set to 10 seconds (former 40 seconds) to be the app default update time step. With such modification the data usage is updated more frequently so that data not accounted for is more unlikely to occur and moreover battery drain doesn't seem to be much affected.
Refresh time for dataMonitor Indicator is set to 10 seconds (former 30 seconds) to be better aligned to Main page app refresh time.
Added a stop command to stop the mattdaemon daemon when uninstalled from Settings, to force it being inactive.
Fix for actiondaemon.cpp file for appropriate data storage, when the device is kept alive continuously for more than one day.
Exceeded data threshold notification is now translatable.

Any feedback on the current status of the app is always welcome.

Kindly note that the present version is the last test version and starting since the next one, i.e. the 0.2.0, you'll hopefully find it published in the OpenStore. What is now missing is only the artwork (to be clear the new app icon as minimum) which will probably not take me too much to implement it thanks to @C0n57an71n work). Thanks to the people who supported me in this journey, which was painful and instructive to me at the same time. See you in the OpenStore! Cheers.

Matteo

magnargj

@matteo hi, I seem to have the same issue as @ricardo65 on my xiaomi mi a2, it is a dual sim phone, looks like the sim is rmnet_data*

trwidick

Having Issue on Pixel 3A, adding limits do not show up and Mobile data receive or send does not show up, app crashes when I click on sim info, or data.
This is the latest update from the App store.

matteo

@magnargj thank you for your feedback. Is your phone a Halium 9.0 one? I think there are issues there. However I will look at this soon, as soon as I get my new (used) phone.

matteo

@trwidick hi, thank you for your feedback. I precisely ordered a Pixel 3A myself to look at those peculiar issues which I believe do occur on Halium 9 devices...once settled and fixed the relevant bugs, I'll issue a new version in the OpenStore, no worries. So, stay tuned

trwidick

@matteo Thank you.

magnargj

@matteo thanks! I suppose it is Halium 9, but need to check to be sure. What command should I run to find out?

TotalRando

@magnargj No command needed. From the UBPorts docs: https://docs.ubports.com/en/latest/porting/index.html

magnargj

@totalrando oh, right! I did downgrade to Android 9 before installing UT, so it is Halium 9 then thanks!

matteo

@magnargj and @trwidick sorry to say but right now I don't own anymore a working Linux PC, since it left me without internet connection, caused probably by wi-fi card hitting its end of life. Therefore it's a road-blocker for me and I can't keep development of app at pace as I wanted to do. First, I need to order a new Linux PC, then flash my brand new Pixel 3a and then I'll be back on track. Hopefully after Summer holidays I'll find a solution. Just wanted to assure that I'm not leaving development for present and other apps, my intention is to stay with UT for a long time, to the infinity and beyond ;P. Thank you for your interest in my app.

Kind regards,

Matteo

magnargj

@matteo thanks for the update. And don't worry, translated from a Norwegian saying: "those who wait for somthing good, waits not in vain" Good luck with the new PC and enjoy the Summer. The latter applies to the whole community

trwidick

@matteo If you need anything let me know, I dont have much money, but i have free time and I am an IT tech. I repair laptops and desktops.Wifi cards i do replace.

matteo

@trwidick really? Do you think it is possible to replace wifi cards only? That would be awesome and save me some time. My PC is a Dell Inspiron model, if you have some hints for me to replace that I would really appreciate Maybe later I can give you more insights regarding the precise model and if I can find some electric scheme, just to understand the amount of work involved.

Keneda

@matteo it's common that wifi chip is not on the motherboard but on a separate one, and lately, on M2 boards.

I don't know your laptop but maybe you can find a teardown video on youtube for it, maybe it's even only a false contact on the wifi board or on the wifi antena connectors...

PS : Inspiron is a product line from dell, search the exact product name/reference, or give us we'll find for you.

You can try on ifixit too : https://www.ifixit.com/Device/Dell_Inspiron