Xiaomi Redmi 4X (santoni)

danqo6 · 17 Mar 2020, 07:49

Same for me, format data as ext4 does not help. I am unable get any logs, dmesg -w on PC does not show anything, /sys/fs/pstore/console-ramoops file does not exist. I am unable to boot your recovery, sudo fastboot boot recovery.img show only mi logo. I tried to downgrade firmware, compile system by my own, many recovery images. But I am unable to boot this (and recovery from that post too). Some people on XDA have similar problem. I was using lastest MIUI 11.2 before.

danqo6 · 17 Mar 2020, 08:22

@Danct12 maybe we should update blobs, I am not sure what else to do.

Danct12 · 17 Mar 2020, 12:37

@danqo6 Perhaps you could try to flash a LOS 14.1 rom first and see if LOS loads.

aceclan · 18 Mar 2020, 22:46

@danqo6 , from the fastboot mode, check first:
$ fastboot devices
330915847d15 fastboot

then download and use: Latest TWRP

$ fastboot boot twrp-3.3.1-0-santoni.img
Sending 'boot.img' (24844 KB) OKAY [ 0.783s]
Booting OKAY [ 0.715s]
Finished. Total time: 1.615s

After Backup ALL and copy TWRP folder to Your PC,
full format: Wipe/Format Data is needed to remove encryption

After flash system.img and rootfs.tar.gz don't forget to boot again to fastboot and flash hallium-boot.img:
fastboot flash boot halium-boot.img

aceclan · 18 Mar 2020, 22:50

@bisaalz , I think You forgot:

fastboot flash boot halium-boot.img

bisaalz · 22 Mar 2020, 03:19

@aceclan I did everything you said flash every thing still stuck at mi logo but other android custom boots but ubuntu never boots

alex000090 · 22 Mar 2020, 09:26

Is it possible to build the boot image with anbox support?

Danct12 · 22 Mar 2020, 11:34

@bisaalz Please try to flash LineageOS 14.1 (just that, don't install Ubuntu), and reboot.

If LineageOS 14 boots, can you try to install Ubuntu again? Perhaps this is needed first, I have not updated my device firmware for months now.

ub_santoni · 22 Mar 2020, 16:26

I don't know how to open the download page, where should I click to get this page
How can i get to the download link？

alex000090 · 22 Mar 2020, 19:28

@ub_santoni You should tap on green tick.

ub_santoni · 23 Mar 2020, 00:51

@alex000090 It's amazing, thank you

bisaalz · 23 Mar 2020, 12:00

@Danct12 Can u give me lineage os 14.1 link

Rafa · 24 Mar 2020, 10:05

@bisaalz I found this: https://www.androidfilehost.com/?fid=890129502657590301

Danct12 · 24 Mar 2020, 21:49

This post is deleted!

maciekrz12 · 30 Mar 2020, 19:30

Hi @Danct12
I followed your steps but I cannot get it working (as contrary to LOS 16).
Halium seems ok

❯ fastboot boot ../../fastboot/imgs/halium-boot.img
downloading 'boot.img'...
OKAY [  0.507s]
booting...
OKAY [  0.792s]
finished. total time: 1.299s

Using halium scirpt seems to work

❯./halium-install -p ut ../redmi_4/ubports-touch.rootfs-xenial-armhf.tar.gz ../redmi_4/system.img
...
* daemon started successfully
.halium-install-imgs.kdniI/rootfs.img: 1 file pushed. 29.4 MB/s (3221225472 bytes in 104.455s)
I:    Pushing android image to /data via ADB
.halium-install-imgs.kdniI/system.img: 1 file pushed. 29.2 MB/s (530046976 bytes in 17.321s)

real	2m4,878s
user	0m0,895s
sys	0m4,792s
I: Cleaning up
umount: .halium-install-rootfs.YfPsB: not mounted.

Reboot dmesg -w output

[  580.375260] usb 1-10: USB disconnect, device number 8
[  591.295694] usb 1-10: new high-speed USB device number 9 using xhci_hcd
[  591.316082] usb 1-10: device descriptor read/8, error -32
[  591.444080] usb 1-10: device descriptor read/8, error -32
[  591.887680] usb 1-10: new high-speed USB device number 10 using xhci_hcd
[  591.908635] usb 1-10: New USB device found, idVendor=18d1, idProduct=d001, bcdDevice= 3.18
[  591.908640] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  591.908643] usb 1-10: Product: Failed to boot
[  591.908646] usb 1-10: Manufacturer: Halium initrd
[  591.908648] usb 1-10: SerialNumber: halium-initrd
[  591.911580] rndis_host 1-10:1.0 usb0: register 'rndis_host' at usb-0000:00:14.0-10, RNDIS device, ce:bd:52:32:a7:cb
[  591.929671] rndis_host 1-10:1.0 enp0s20f0u10: renamed from usb0

SSH does not seem to work (either by using connect script or manual setup)

./connect.py -p ssh -u phablet                                                                  
* The device seems to be connected as enp0s20f0u10
* Connecting using ssh
ssh: connect to host 10.15.19.82 port 22: No route to host

Telnet is working though but:

cat /var/lib/lxc/android/rootfs/ueventd*.rc|grep ^/dev|sed -e 's/^\/dev\///'|awk '{printf "ACTION==\"add\", KERNEL==\"%s\", OWNER=\"%s\", GROUP=\"%s\", MODE=\"%s\"\n",$1,$3,$4,$2}' | sed -e 's/\r//' >
/usr/lib/lxc-android-config/70-[santoni].rules
cat: can't open '/var/lib/lxc/android/rootfs/ueventd*.rc': No such file or directory
/bin/sh: can't create /usr/lib/lxc-android-config/70-[santoni].rules: nonexistent directory

Additionaly

ls -la /var/
total 0
drwxr-xr-x    3 0        0               60 Jun  2 22:38 .
drwxr-xr-x   22 0        0              460 Jun  2 22:39 ..
drwxr-xr-x    2 0        0               40 Jun  2 22:38 lock


ls -la /lib/
total 144
drwxr-xr-x    7 0        0              180 Mar  6  2020 .
drwxr-xr-x   22 0        0              460 Jun  2 22:39 ..
drwxr-xr-x    2 0        0              740 Mar  6  2020 aarch64-linux-gnu
-rwxr-xr-x    1 0        0           144064 May  8  2016 klibc-l2KWxiQhsOhwWkxGl3jGkrDaJnQ.so
lrwxrwxrwx    1 0        0               28 Mar  6  2020 ld-linux-aarch64.so.1 -> aarch64-linux-gnu/ld-2.24.so
drwxr-xr-x    2 0        0               80 Mar  6  2020 modprobe.d
drwxr-xr-x    3 0        0               60 Mar  6  2020 modules
drwxr-xr-x    3 0        0               80 Mar  6  2020 systemd
drwxr-xr-x    3 0        0              100 Mar  6  2020 udev

Any ideas?

maciekrz12 · 30 Mar 2020, 19:45

sorry for mistake - the first one was

fastboot flash boot ../../fastboot/imgs/halium-boot.img

danqo6 · 5 Apr 2020, 02:22

@Danct12 all LOS 14.1 roms I found works. ( ROMs before official LOS) I have twrp 3.3.1, I formatted data as ext4. I have 3GB version of redmi 4x, my LCD display was changed once. My logs seems ok, but I am unable to get even telnet working. Other my halium 14.1 devices are working fine using this method (hammerhead and kenzo). I am not sure what else to do.

[dano@dano-80qd Downloads]$ ./halium-install/halium-install -p ut ubports-touch.rootfs-xenial-armhf.tar.gz system.img 
[sudo] password for dano: 
Debug: Chosen rootfs is ubports-touch.rootfs-xenial-armhf.tar.gz
Debug: Chosen android image is system.img
Debug: Chosen release is ut
Debug: Compress images before pushing: false

I: Writing rootfs into mountable image
I: Writing android image into mountable image
I: Running post installation tasks
enabling Mir ... [done]
enabling SSH ... [done]
Please enter a new password for the user 'phablet':
Enter new UNIX password: 
Retype new UNIX password: 
passwd: password updated successfully
I: Shrinking images
e2fsck 1.45.6 (20-Mar-2020)
resize2fs 1.45.6 (20-Mar-2020)
Resizing the filesystem on .halium-install-imgs.KFoU8/system.img to 129406 (4k) blocks.
Begin pass 2 (max = 32743)
Relocating blocks             XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Begin pass 3 (max = 24)
Scanning inode table          XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
The filesystem on .halium-install-imgs.KFoU8/system.img is now 129406 (4k) blocks long.

I: Unmounting images
I: Pushing rootfs and android image to /data via ADB
I:    Pushing rootfs to /data via ADB
* daemon not running; starting now at tcp:5037
* daemon started successfully
.halium-install-imgs.KFoU8/rootfs.img: 1 file pushed, 0 skipped. 13.2 MB/s (3221225472 bytes in 233.033s)
I:    Pushing android image to /data via ADB
.halium-install-imgs.KFoU8/system.img: 1 file pushed, 0 skipped. 13.1 MB/s (530046976 bytes in 38.671s)

real	4m32,192s
user	0m0,484s
sys	0m4,332s
I: Cleaning up
umount: .halium-install-rootfs.ttgv0: not mounted.
[dano@dano-80qd Downloads]$ sudo fastboot  flash boot halium-boot.img 
[sudo] password for dano: 
Sending 'boot' (16084 KB)                          OKAY [  0.557s]
Writing 'boot'                                     OKAY [  0.137s]
Finished. Total time: 0.699s
[dano@dano-80qd Downloads]$ sudo fastboot reboot
Rebooting                                          OKAY [  0.000s]
Finished. Total time: 0.050s
[dano@dano-80qd halium-install]$ sudo dmesg -w
...
[15392.651927] usb 1-3: new high-speed USB device number 19 using xhci_hcd
[15392.669563] usb 1-3: New USB device found, idVendor=18d1, idProduct=d001, bcdDevice= 3.18
[15392.669569] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15392.669573] usb 1-3: Product: Redmi 4
[15392.669576] usb 1-3: Manufacturer: Xiaomi
[15392.669579] usb 1-3: SerialNumber: 225ac30a7d04
[15400.207598] usb 1-3: USB disconnect, device number 19
//reboot from recovery to fastboot
[15400.531883] usb 1-3: new high-speed USB device number 20 using xhci_hcd
[15400.549566] usb 1-3: New USB device found, idVendor=18d1, idProduct=4ee2, bcdDevice= 3.18
[15400.549572] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15400.549576] usb 1-3: Product: Redmi 4
[15400.549579] usb 1-3: Manufacturer: Xiaomi
[15400.549582] usb 1-3: SerialNumber: 225ac30a7d04
[15438.269896] usb 1-3: USB disconnect, device number 20
//reboot from fastboot to system(no other logs)
[15440.886720] audit: type=1100 audit(1585657060.387:1823): pid=46212 uid=1000 auid=1000 ses=2 msg='op=PAM:unix_chkpwd acct="dano" exe="/usr/bin/unix_chkpwd" hostname=? addr=? terminal=? res=success'
^C

suoko · 1 Apr 2020, 04:18

It would be nice to have an option to install ubports with
Xiaomi tool v2, with dual boot option.
Not sure it's an open project though.

Lakotaubp · 1 Apr 2020, 04:18

@suoko UBports does not support duel boot I'm afraid, sorry.

Danct12 · 2 Apr 2020, 23:57

@maciekrz12 said in Xiaomi Redmi 4X (santoni):

Failed to boot

If your device's userdata partition is encrypted then unfortunately you'll have to format it, meaning you'll lose all your data.

To do so, goto TWRP -> Wipe -> Format Data (the button is in red)

After that reinstall Ubuntu and hopefully it'll work. If not please telnet and give me dmesg (put it on pastebin or something).