Trouble Installing on Oneplus One (Solved)
-
@Edward-Wilhelm said in Trouble Installing on Oneplus One:
- daemon started successfully
******** device
"
It is still hung where it says:
"
"flashing firmware.."
"flashing firmware partitions using fastboot"
"
It's a step forward ^^
Now try to do the ADB devices command after booting phone in recovery and plugged to PC.
It should return a ********* recovery like in my image.
TIP : right after doing an "adb devices" command, whatever result it gives, when you're finished, phone unplugged, type "adb kill-server" so the next time you try an "adb devices" command, adb starts a fresh server and daemon.
- daemon started successfully
-
Rebooted into recovery mode. The phone screen gives the options to:
*reboot system now
*apply update
*factory reset
*advancedRunning the kill command gave this:
cannot connect to daemon at tcp:5037: Connection refusedRunning "adb devices" command gave this:
List of devices attached
adb server version (41) doesn't match this client (39); killing...
ADB server didn't ACK
Full server startup log: /tmp/adb.1000.log
Server had pid: 5661
--- adb starting (pid 5661) ---
adb I 04-12 10:32:30 5661 5661 main.cpp:57] Android Debug Bridge version 1.0.39
adb I 04-12 10:32:30 5661 5661 main.cpp:57] Version 1:8.1.0+r23-5~18.04
adb I 04-12 10:32:30 5661 5661 main.cpp:57] Installed as /usr/lib/android-sdk/platform-tools/adb
adb I 04-12 10:32:30 5661 5661 main.cpp:57]
adb I 04-12 10:32:30 5661 5661 adb_auth_host.cpp:416] adb_auth_init...
adb I 04-12 10:32:30 5661 5661 adb_auth_host.cpp:174] read_key_file '/home/wisian/.android/adbkey'...
adb I 04-12 10:32:30 5661 5661 adb_auth_host.cpp:391] adb_auth_inotify_init...
adb server killed by remote request- failed to start daemon
error: cannot connect to daemon
- failed to start daemon
-
@Edward-Wilhelm You need to give permission for the adb connection to work with the device. You could revoke all other connections and try again. I would just boot the phone into normal mode, connect it to pc/laptop and start the installer. Watch both installer and device closely. Accept the connection on the device when it asks then just follow the installer instructions.
-
@Lakotaubp said in Trouble Installing on Oneplus One:
@Edward-Wilhelm You need to give permission for the adb connection to work with the device. You could revoke all other connections and try again. I would just boot the phone into normal mode, connect it to pc/laptop and start the installer. Watch both installer and device closely. Accept the connection on the device when it asks then just follow the installer instructions.
I do not understand what you mean. I enabled the MTP and ADB and dev mode. I installed the fast boot. I run the installer. The phone says
"fastboot mode"
the installer says it is flashing the device. It stays like that and nothing changes.
I have followed all the instructions I could find.The website says this
" Installing Ubuntu Touch is EasyWith the UBports installer, you can get Ubuntu Touch on your device without breaking a sweat. You can use any computer to run the installer. Simply plug in your device and follow the on-screen instructions. Then sit back and let your computer do all the work. "
I do not know what to do now. I have done everything the installer said to do.
-
@Edward-Wilhelm Can you try a few other usb cables. It seems the connection between you pc/laptop and device is not working somehow.
Before you do that. Stop the installer and with the device in fastboot mode type in a terminalFastboot devices
Is your device listed? If yes we need to look elsewhere if not that is the issue.
-
Also have a look here it was very similar to your issue https://forums.ubports.com/topic/4033/oneplus-one-installation-trouble/2
Are you using the snap version of the installer? AS you can see the progress of installing in the terminal as it runs. Might give you another clue. -
@Lakotaubp said in Trouble Installing on Oneplus One:
@Edward-Wilhelm Can you try a few other usb cables. It seems the connection between you pc/laptop and device is not working somehow.
Before you do that. Stop the installer and with the device in fastboot mode type in a terminalFastboot devices
Is your device listed? If yes we need to look elsewhere if not that is the issue.
running "fastboot devices" gives:
no permissions (user in plugdev group; are your udev rules wrong?); see [http://developer.android.com/tools/device.html] fastboot
I could not get the snap version to run. It installed, but when I tried to run it, it said there was an error and that something must have gone wrong during the installation. I have since removed the snap version. I am now running the debian package version.
-
@Edward-Wilhelm Right, that's what needs fixing, fastboot has not the permission to access the device. Give me a minute to re-read through.
-
@Edward-Wilhelm Open a terminal and rerun the sudo apt update and sudo apt-get install commands from above again. When that's done in a terminal type sudo fastboot OEM unlock
Then try again. -
okay ran:
sudo apt update and sudo apt-get install commands from above again
then:
adb devices
List of devices attached- daemon not running; starting now at tcp:5037
- daemon started successfully
******** device
next ran sudo fastboot OEM unlock
it returned that it was waiting for any devicethen I ran the installer and it returned:
fastboot: usage: unknown command OEM -
Does anyone have a liveboot OS that has everything needed to run install out of the box?
-
@Edward-Wilhelm Sorry. Put your device in fastboot then run in terminal sudo fastboot oem unlock
-
@Lakotaubp
It still returned:
fastboot: usage: unknown command OEM -
@Edward-Wilhelm Have you tried a few usb cables and ports
-
And I guess fastboot devices still returns the same error as before.
-
what happens if you write oem instead of OEM?
-
@Rondarius
It returns:
< waiting for any device >and then waits for a response
-
@Lakotaubp
I have now tried two different cables in two different ports -
@Edward-Wilhelm What needs sorting is the udev rules. That link that came up after your error message shows you how. It's something I have never done I must admit.
-
@Lakotaubp
Okay. My brother let me use his computer that is running pop os. I installed snap, fastboot, the ubuntu installer from within snap etc. I ran the installation on the phone and everything appeared to be working. It prompted me in the gui to run unblock oem which I did. The phone went through several different screens including loading 142 of something, and an android graphic that said erasing. It rebooted itself a couple times. The phone screen is now black, but a light on the front of the phone is flashing various colours. The installer says "flashing firmware...". It has been stuck like this for a while now. Do you think the installation process is working? How long should it stay like this?
