Finally i finished the port for device H910, I will upload this night. For more information please read this:
https://github.com/Halium/projectmanagement/issues/300

I am not responsible for bricked devices

I have start the port of UT on LG Nexus 5X(bullhead), current state, what work :

• Touch Screen

• Wifi

• Sound

• Camera (on first boot if system tell you for permission, just reboot phone)

• Ril

• GPS (tested with uNav)

What not work yet:

• Bluetooth

• Fingerprint

How to install :
1- Download this ubuntu-touch-bullhead-v02.zip
2- Backup your data, boot, vendor partition (system not needed) if you want return back to your current rom
3- Format data partition (format to remove any encryption setting)
4- Copy ubuntu-touch-bullhead-v02.zip in internal disk of your phone
5- install ubuntu-touch-bullhead-v02.zip like regular ROM
6- reboot.

Password : 1111

Issue:

• for wifi you must wait few seconds
• for camera, first boot maybe will not work (permission missing), so reboot phone after setup it.

Best Regards

This is a port of Ubuntu Touch for the LG V20 T-Mobile h918 variant.

Sources:
Kernel:
https://github.com/walidham/android_kernel_lge_msm8996/tree/halium-7.1

Device:
https://github.com/walidham/android_device_lge_h918/tree/halium-7.1
https://github.com/walidham/android_device_lge_msm8996-common/tree/halium-7.1

Manifest file
https://github.com/walidham/lge_manifest/tree/master

Status
Working:

• Audio
• Calling
• SMS
• 4G
• Wifi
• GPS
• Vibration
• Orientation sensor

Missing:

• Video recording/decoding
• Bluetooth
• Flash light
• ADB/MTP
• Libertine
• camera
• fingerprint

Install:
NOTE: As the LGV20 aren't community devices yet, the install process may be a little "non-noobie-friendly"

• Install twrp on your device, format data partotion to ext4
• Download the latest precompiled system.img and halium-boot.img (extract file)
• Download the JBB's halium install script
• Download either the regular rootfsor the Edge one
• While on TWRP:

halium-install -p ut the_rootfs_you_choose.tar.gz system.img

• While on TWRP:

adb shell 'mkdir /a; mount /data/rootfs.img /a; echo manual | tee /a/etc/init/rsyslog.override; umount /a; sync'

• While on TWRP: install halium-boot.img (on boot partition)
• Then reboot
• Connect to phone with ssh

ssh phablet@10.15.19.82

• When entering in ssh run those vommands:

sudo -i
$ mount -o remount,rw /
$ cat /var/lib/lxc/android/rootfs/ueventd*.rc | grep ^/dev | sed -e 's/^\/dev\///' | awk '{printf "ACTION==\"add\", KERNEL==\"%s\", OWNER=\"%s\", GROUP=\"%s\", MODE=\"%s\"\n",$1,$3,$4,$2}' | sed -e 's/\r//' >/etc/udev/rules.d/70-h918.rules
$ reboot

@Guf said in Ubuntu Touch on LG G6 (h870 model): call for testers:

Annoying flooding of errors in dmesg with the following message: "IPC_RTR: msm_ipc_router_bind: pm-service Do not have permissions" . It unfortunately drains battery

Hi i have ported LG V20, same hardware and manifacture. for this error

Annoying flooding of errors in dmesg with the following message: "IPC_RTR: msm_ipc_router_bind: pm-service Do not have permissions" . It unfortunately drains battery

Didi you added SECURITY_ANDROID_GID_CAPABILITIES in your kernel ?
see this
http://docs.halium.org/en/latest/porting/debug-build/wifi.html

@Flohack

Many users want to know how backport kernel to make bluetooth work , in this guide i will try to show you the steps to do it:

1- First clone linux-next (don't download zip or tar file you must clone)

git clone https://kernel.googlesource.com/pub/scm/linux/kernel/git/next/linux-next -b v4.2-rc7 linux-kernel

2- Clone your kernel

3- Clone backport patch

https://github.com/ubuntu-phonedations/backports.git -b for-ubuntu backport-ubuntu

4- Under backport-ubuntu folder, run this command (you must put absolute path for kernel)

./gentree.py --copy-list ./copy-list --integrate --clean --git-revision v4.6 [path-to-kernel-next]/kernel-next [path-to-your-kernel]/your_kernel

If you try to compile kernel maybe you will get some error, to avoid it try first to apply this patch :

First check if patch is ok
git apply --check hid-generic.patch

Second if there is not any error apply it

git am --signoff < hid-generic.patch

Finaly replace backport folder (in your kernel )with this

backports.tar.xz

Link to download hid-generic.patch
hid-generic.patch

Also its important : remove all CONFIG_BT* in kernel config
BR

Hi
I need help to fix this problem.
I'm try to port UBT to Moto G 2014, the phone boot, but no graphic
This is log cat
dmesg
test_egl :
root@ubuntu-phablet:/# test_egl
library "egl/eglsubAndroid.so" not found
Segmentation fault (core dumped)

test_glesv2
root@ubuntu-phablet:/# test_glesv2
library "egl/eglsubAndroid.so" not found
Segmentation fault (core dumped)

test_hwcomposer
root@ubuntu-phablet:/# test_hwcomposer

width: 720 height: 1280
library "egl/eglsubAndroid.so" not found
Segmentation fault (core dumped)

There is many version of rootfs, hybris, edge, mainline....
There is no doc to explain each version and when use it.
Also for arm64 UT is broke ? libhybris for caf device with halium-7.1 ?

@UniSuperBox work on it. He has many problem, hope he resolve it as soon as possible

@Flohack Hi can you help me to understant this error :

E/adsprpc ( 0): vendor/qcom/proprietary/adsprpc/src/apps_std_imp.c:33:apps_std fopen failed: ./oemconfig.so No such file or directory
E/adsprpc ( 0): vendor/qcom/proprietary/adsprpc/src/apps_std_imp.c:33:apps_std fopen failed: /system/lib/rfsa/adsp/./oemconfig.so No such file or directory

btw camera(photo) , power buton, rotaion work.
what no work : ril, audio, wifi,....

full logs logcat

@jiho nice
the audio call not work, also fingerprint.
I'm working now to fix this issues

@jiho can you reboot to recovery twrp,

Then :

adb shell
ls /data

verif if android-rootfs.img & rootfs.img exists

Also can you give me the log under
/data/system-user/var/log

Also you must format data partition before install to remove any encryption

@jiho thanks
Did you installed vendor.img?
There is twrp install file which more simple and it install all needed files
https://androidfilehost.com/?fid=9180008750105244726

@Keneda yes Nexus 5X bullhead

@walidham
TWRP file install
UT20.04

I want share my work with any wants test and help for porting this device.
You can download this file : https://drive.google.com/file/d/1R_BUT-I0-YNfM1Et6mGi_AcqpEituXQh/view?usp=sharing
which contains:

• system.img
• vendor.img
• halium-boot.img

Code source :
https://github.com/bullhead-ubuntu-touch

Installation:
1- Reboot to recovery mode (twrp)
2- Install halium-boot.img
3- Install vendor.img to vendor partition
4- install Ubuntu touch read this :

https://docs.ubports.com/en/latest/porting/build_and_boot/Halium_install.html

I am not responsible for bricked devices

I have start the port of UT on LG Nexus 5X(bullhead), current state, what work :

• Touch Screen

• Wifi

• Sound

• Camera (on first boot if system tell you for permission, just reboot phone)

• Ril

• GPS (tested with uNav)

What not work yet:

• Bluetooth

• Fingerprint

How to install :
1- Download this ubuntu-touch-bullhead-v02.zip
2- Backup your data, boot, vendor partition (system not needed) if you want return back to your current rom
3- Format data partition (format to remove any encryption setting)
4- Copy ubuntu-touch-bullhead-v02.zip in internal disk of your phone
5- install ubuntu-touch-bullhead-v02.zip like regular ROM
6- reboot.

Password : 1111

Issue:

• for wifi you must wait few seconds
• for camera, first boot maybe will not work (permission missing), so reboot phone after setup it.

Best Regards

Finally i finished the port for device H910, I will upload this night. For more information please read this:
https://github.com/Halium/projectmanagement/issues/300

@mateo_salta se this
https://forum.xda-developers.com/t/guide-lg-v20-hard-unbrick.4244283/

For LG V20, i finished the port for H910, its beta version need more test and fixe bugs.
Download link : https://www.androidfilehost.com/?fid=14871746926876820212

Installatio:
1- backup your data and boot partition. System partition you can take it, we not use it.
2- Download ubuntu-touch-h910-01-01-2020.zip
3- Install the zip
4- Rebbot

Password : 1111