@kristatos said in Cell-Broadcast:

@dosolly On my Volla it isn't activated after cold boot and I can't activate it through system-settings. So I've created a systemd-timer and a corresponding systemd-service that enables CB via ofona-scripts.

Timer:

[Unit]
Description=Aktivieren von Cell-Broadcast

[Timer]
OnBootSec=2min
Unit=enable-cbs.service

[Install]
WantedBy=multi-user.target

Service:

[Unit]
Description=Aktivieren von Cell-Broadcast

[Service]
Type=simple
ExecStart=/usr/share/ofono/scripts/enable-cbs

[Install]
WantedBy=multi-user.target

After that you have to enable timer and service and CBS is enabled 2 minutes after a cold boot.
The CB-test yesterday showed me, that it's working (before, there was no way to check it )

Thanks a lot, will try it later.

@kristatos said in Cell-Broadcast:

@dosolly Have you checked if CB is activated in the system-settings? For my Volla/GS290 it has worked yesterday, but I had to do some tricks to get it activated.

Oh yes, checked it several times. But would you tell us your tricks, perhaps

Yesterday was a national warning day in Germany. On my device OP North N10 (Develop 144),there was no alarm over Cell Broadcast

Yep, Your assumption was correct. The LEDs remain off after a reboot, which is a pity.

Hi all, oneplus 5t, since updated to devel 499, LEDs working again.

@Br1 OK, thx a lot, works now like a charm.

@Br1 Thanks for your help, at least the installation worked. Now I have to test it extensively.

@Br1 Hallo, thanx a lot for your work, but :
:~/sudo Downloads/callrecorder-ota.2/callrec-install

:~/sudo: callrec-install:command not found

@domubpkm Seems not FP- spezific. Same issue here with OPO5t. W30/2 (RC).

@mihael Hallo.
Have you noticed that the focus only works manually? Target the subject and tap the screen. I have the OP5t too, the photos are very good.