Yes, had the same problem this morning after the update on my VollaPhone. I reflashed it from the UT installer (not ticking the wipe option) choosing the RC channel and it rebooted fine!

@ezze I've just cheked TELEports on my Nexus 5 and it works fine... I had some connection issues when signing on a few months ago, but it worked after a few tries.

Hi, just to say that I eventually managed to install Ubuntu touch using the BQ's flash tool and firmware!
I haven't work on upgrading to UBports yet, but I'll try soon...
Thanks all for your help!

@freebobjohn I have exactly the same issue with my BQ M10 FHD!
Did you find a way to install UBports till december? Thanks, Emmelyne

I think I get rid of one of the problem: my OEM wasn't properly unlock and after having doing it well I was able to run the magic-device-tool!
But I'm now stuck with the recovery mode of frieza and when I choose the reboot the device, I getting the powered by android image with the Orange state alert and nothing happens...
So I try to follow the post of 29 may 2017 07:28 of this topic :Can't get the M10 FHD to take the flash, but when I run the "df -h" I can see (image) that my system partition is only 1.5G and the userdata one is only 774.9M!
How could that be?
Thanks again

0_1512592466373_M10DevicePartitions.png

Hi @fulvio
I've tried the UBPorts installer, which seems really simple indeed!
But when I connect my BQ M10 FHD, I've got the message that "Device Aquaris_M10_FHD" is not supported (see image ).
Any idea why?
Thank you!!
0_1512585110338_DeviceNotSupported.png

Ok, thank you both!
I'll try some of the mention solutions and let you know.

@Lakota, thanks
Yes, I've seen this post before !
But when I connect my m10 in recovery mode and try to run the commands on terminal, I get a "could detect device" (or something close).
Whereas when I run the MDT, it says "device detected"...

Hi @Lakota,
thanks for your answer.
Yes my m10 is on Android 6.0
and yes, I've already enabled the developer mode on the tablet.
For the cache I've wiped it from de recovery menu, I hope that' enough...

I've try to flash Ubuntu Touch but I can't install the SP flash tool !
I'll try again and let you know.
thanks

Hello,

I'm trying to flash my new M10 FHD with UBports Frieza using Magic-device-tool but I can't make it !
(but it wouldn't work either with system image server)
I've enable and unlock the OEM and USB options via the developper tools of the device.
I reboot into fastboot mode and then follow the steps of the MDT, but it stops after a few seconds with the message :

Inode size: 256
Journal blocks: 6144
Label: 
Blocks: 393216
Block groups: 12
Reserved block group size: 95
Created filesystem with 11/98304 inodes and 12897/393216 blocks target reported max download size of 134217728 bytes
erasing 'system'...
FAILED (remote: format for partition 'system' is not allowed)
finished. total time: 0.003s
erasing 'recovery'...
FAILED (remote: format for partition 'recovery' is not allowed)
finished. total time: 0.004s
rebooting into bootloader...
OKAY [  0.003s]
finished. total time: 0.053s
Please wait
rm: cannot remove '/home/xxx/snap/magic-device-tool/299/.cache/magic-device-tool/recovery-frieza.img': No such file or directory
recovery-frieza.img            100%[====================================================>]  11.18M  2.55MB/s    in 4.5s    


2017/12/02 18:00:32 Device is |frieza|
2017/12/02 18:00:32 Flashing version 12 from ubports-touch/legacy channel and server http://system-image.ubports.com to device frieza
381.65 KB / 104.46 MB [___________________________________________________________________________] 0.36 % 953.06 KB/s 1m51scan't flash recovery image

Wait until it reboots on its own!
Do not reboot manually!

Cleaning up..

Exiting magic-device-tool. Bye Bye

Does anyone had this message before?
Thank you,

Emmelyne