@bdomecq said in wi-fi scan: Do you believe that this wi-fi issue is due to the fact the device is the 't-mobile' variation? Could well be the issue.

@kugiigi OK. Anyway, thank you.

@davidm90 the problem in mine was different since the device is a 't-mobile variation', which required that very specific xml modification that I mentioned above.

@domubpkm no go, the developer doesn't know how to do it and unfortunately I am not able to contribute.

@MrT10001 Thanks for the reply I will try the MSM tool, lets see if it works from Virtualbox with USB passthrough, after if backed up all block devices with dd. Will report back.

@nonobike It should work ! Please, take a look a these issues and their solutions. https://github.com/fredldotme/snapz0r/issues

@Timespansoul Its now fixed with the patch to reenable ims services.

@stanwood Thank you for the update. I went back and did some more research and needless to say, I'm less than impressed with the knowledge of the ATT people I spoke to at the store. You're right that 4G isn't going away and the way they built 4G, its basically the backbone for 5G technology so not sure if the ATT people were just fear mongering, or just didn't want to deal with an OS that was clearly very unfamiliar to them. Its good to know UT is continuing to work on this problem. I really liked the OS. The simplicity of it, the lack of apps and ability customize it. Not to mention, its very snappy, even on older, under powered phones like the N100. I know my post sounded negative, but I'm not giving up yet, I see a lot of potential for this OS and will continue to work it. Thanks again for the update.

@moaner said in Oneplus Nord N100 boot failure: I'll speak for myself as i wish. If you don't like it then throw me out or block me We can do that. Please consider this your official warning. You can either play nice, or play elsewhere.

Thank you both, I found it: echo 10 > /sys/devices/platform/soc/5e00000.qcom,mdss_mdp/backlight/panel0-backlight/brightness - this is how I can manually change the brightness... Next I'll see if I can modify somewhere the minimum value that the slider can adjust so that I will use the slider in the brightness menu and not the command line.

You know what? - just before uninstalling it I checked it again and, upon activation, it worked! Maybe meanwhile I restarted the phone but I'm sure I restarted it before and it didn't help... Anyway, I'm very glad it works now! Thank you!

This is what I did and I have now a working device! Thank you for the push

@AppLee ok. I try to experiment .

@Kamil IDK, it depends on what the porter did. But if the only options are 60 and 90, I would guess 60 to improve battery usage.

@MrT10001 After some reboots, the second sim is available. However, when I have this sim inactive ( not using PIN to unlock), I'm not able to use the Cellular data on the primary sim. Although data seems active, I have no internet at all ( route table is empty!). If I reactivate the second sim, then cellular data on the primary sim is working. Has anyone experienced this before?

Hi @MrT10001, Good news! Exactly, Stabil OTA 5 is now also available for this device. Thank you very much for your help, you are indeed a great help in this forum, because you are friendly, helpful, efficient, not work-shy and also professional in your range. :clapping_hands_light_skin_tone: I had stuck to the device page because it is always kept so high by the forum moderators. Unfortunately (as it turns out) this very page is rarely up to date, which is a bit embarrassing. A little teasing is a must. :winking_face: Best wishes to all you dear ones out there Mario :smiling_face_with_heart-eyes:

@Timespansoul Not noticed this. It seems to connect every time from a cold boot or reboot.