Can't update Aquaris M10 FHD Frieza

Lakotaubp · 12 Apr 2020, 13:53

@nterr This might be useful it might not https://web.archive.org/web/20180118130643/http://www.mibqyyo.com/en-articles/2015/09/16/ubuntu-android-installation-process-for-bq-aquaris-e4-5-and-e5 process is the same for your device.

nterr · 12 Apr 2020, 16:09

Thanks.

Got the old rom working (OTA15).

Still can't get ubports-installer to install the update correctly. Still the same problem I described in my first post.
Basically I'm still stuck at the exact same point.

I forgot to respond to this :

Yes dev mode was activated
I'm on linux.

Marathon2422 · 13 Apr 2020, 21:21

@nterr
when you turned dev mode on did you get The little window and click the " ALLOW " option ,like you do with adb connection.
i forgot to say ,you should reboot after doing that. ( i have this device and swap OS`s , it can be picky at times).
if you still have no access to it, reflash Ubuntu with flashtool ( not with the Format all option).
if you are "bricked" pull the cover off ( no wires are stuck to anything ) disconnect the battery , reflash wth flash tool ,then reconnect battery , and try again.

Lakotaubp · 14 Apr 2020, 05:33

@nterr If you can use the snap installer try that, you can watch in a terminal where the issue arrives. Reboot to recovery and clear cache and try again with the snap installer. We have had a few issues recently with adb dropping out for some reason you could also try checking thats is working ok.

nterr · 15 Apr 2020, 12:52

Flashed back to the old rom with flash tool (ota15, working fine), checked if dev mode was correctly activated, it was, rebooted just in case, rebooted again, cleared cashed, used ubpoters-installers from the snap repo, rebooted to bootloader, and everything just seems to work fine... This is what I get in the terminal :

info: Welcome to the UBports Installer version 0.4.18-beta!
info: Downloaded file 1 of 1
checked: keyring-4c4e7ef380ebcfa2c31084efa199138e93bfed8fc58aa3eb06bdf75a78af9b57.tar.xz true
checked: version-9.tar.xz true
checked: device-6e23e473ab0b5bd2baa820e442b41d22fe20d76f8ca984e2fb22bf47597a5eb0.tar.xz true
checked: ubports-a1f443971032f2b6a03ed6f83d3340e026d59bfbe1625b259fb77eb05fa2b6a9.tar.xz true
info: All done! Your device will now reboot and complete the installation. Enjoy exploring Ubuntu Touch!

But it's still stuck at "installing ubuntu update."

AppLee · 15 Apr 2020, 13:49

@nterr
This step can take some time to proceed.
The installation files were successfully copied to the phone.
But now it needs to unpack it and put it in the right partitions. I don't remember how long it can take, but it's safer if your phone is fully charged or plugged to a wall socket.

What is the current status ?

nterr · 15 Apr 2020, 14:22

Just what you said, plugged to a wall socket and stuck at "installing ubuntu update" for an hour or so... Last time I waited a couple of hours, since installer says it should take 5 minutes I assumed it was just stuck. I guess I'll try to wait longer this time...

hankschwie · 15 Apr 2020, 15:12

Hi!

Perhaps it would be a good idea to try a manual installation? Unfortunately I can't find the instructions; they used to be on the old device pages, but the link is gone from the new device pages... I just asked over there where to find the instructions nowadays :https://forums.ubports.com/post/31321

Maybe @AppLee knows where to find them?

AppLee · 15 Apr 2020, 15:22

@hankschwie said in Can't update Aquaris M10 FHD Frieza:

Maybe @AppLee knows where to find them?

Sorry : no idea
I only went through flashing with my N5 one time and with the PinePhone.
Both were extremely easy.

hankschwie · 15 Apr 2020, 15:37

I thought that by doing a manual installation we probably are able to locate the "trouble spot", and get an idea what goes wrong here....

Hm. Sometimes it helps to use a TWRP recovery to clean the cache thoroughly. Perhaps it is worth a try, https://eu.dl.twrp.me/freezerfhd/

Or have a look at this post: https://forums.ubports.com/post/1617 The trouble is: not enough space left in the cache...

Could you try an adb shell df -h command in recovery mode? That should show us the space left on the device, and the cache partition

Lakotaubp · 15 Apr 2020, 15:52

@nterr This is a bit odd. Did you choose the wipe option when installing (if you have backed up your stuff first). Try rebooting to recovery use the options to clear the cache and try again.

nterr · 15 Apr 2020, 18:54

adb shell "df -h"

daemon not running. starting it now on port 5037 *
daemon started successfully *
Filesystem Size Used Available Use% Mounted on
tmpfs 981.1M 36.0K 981.0M 0% /dev
tmpfs 981.1M 12.0K 981.0M 0% /tmp
/dev/block/platform/mtk-msdc.0/by-name/userdata
9.3G 319.4M 9.0G 3% /data
/dev/block/platform/mtk-msdc.0/by-name/system
3.8G 480.2M 3.3G 12% /cache

Well I tried already before posting what's said in this other post. But I can try all over again just in case I did smthing wrong along the way...
Tried too to install it a few different ways, using the wipe option or not, rc and stable...

What's TWRP and how should I use it ?

hankschwie · 15 Apr 2020, 19:11

TWRP is an alternative recovery, which offers quite a few things you can perform from "outside" the main system. It is flashed to the recovery partition of the device using fastboot - it replaces the recovery provided by UT or the original OS. It can be used to root android devices, create backups etc, or flash the whole system with custom-ROMs. In this case it could be useful to clear the cache partition completely.

You would have to download the image from the linked twrp-site, and flash the recovery as described on the the webside. Afterwards you would have to reboot in this recovery (adb reboot recovery), and then use the tools to wipe the cache, or perhaps even erase the whole system to retry with the UBports Installer.

nterr · 15 Apr 2020, 19:12

Ok thanks, I'll try that !

nterr · 15 Apr 2020, 19:35

Wiped everything successfully through TWRP. Tried again. No better luck... Stuck again...
I guess these manual installation instructions would indeed be the best way to understand where the installation goes wrong...
(thanks for asking in this other thread btw)

hankschwie · 15 Apr 2020, 20:08

Last thing I can think of: Try to flash a recent Android version onto the tablet, and then try again...

I hope we can relocate the instructions - but I can't find it on https://web.archive.org/web, I always end up on the new device page without the instructions...

hankschwie · 15 Apr 2020, 20:22

Found this; https://forums.ubports.com/user/themoose007 , run installer as root... https://forums.ubports.com/post/11636

Marathon2422 · 15 Apr 2020, 21:08

I wiill check my spare drive ,see what i have,( looking for a twrp copy of m10 fhd )

hankschwie · 15 Apr 2020, 21:18

Hi!
Thanks, but trwp isn't the problem...We are looking for instructions to install UT for frieza manually, without the installer...

Marathon2422 · 15 Apr 2020, 21:33

@hankschwie
you can flash any recovery ie ;- twrp with flashtool , go in and wipe it (clean up ) and reflash with flashtool, ( not using format all ) , and try again, it sounds like the recovery geting stuck.
or, use flashtool to flash, another copy of recovery , it takes about 12 seconds ,.
i was hoping i had kept a twrp backup of ubports, sorry , i only have android and ubuntu touch regular firmware.
my only other thought was :- the device you have is a m10 fhd and not an m10fh. sorry got to ask ?