Oneplus One installation failure

cliffcoggin

I have a new cable arriving later today. Initially the old cable was working and the computer detected the phone as A0001, but later attempts told me there was no connection.

cliffcoggin

@Lakotaubp
The new cable connects the phone to the computer. A0001 is mounted.

adb reboot bootloader

caused the phone to go into fastboot mode rather than restart.

sudo fastboot oem unlock

plus password gave me OKAY finished in 0.023s.

fastbboot devices

caused the phone to factory reset.

Where do I go from here please?
PS. Should "ADB over network" be enabled?

Lakotaubp

@cliffcoggin You do need to grant permission for the connection between pc and device that's all. I would just type in a terminal as a check

adb devices

Then run the installer if your device is shown that is

cliffcoggin

It doesn't show the phone.

List of devices attached
df32588a	unauthorized

How do I authorise it?

cliffcoggin

I give up. I have tried every combination of instructions I can find, including the terminal command mentioned elsewhere on the forum. I'll get rid of it and stick with my dumb flip phone.

Keneda

@cliffcoggin said in Oneplus One installation failure:

It doesn't show the phone.
List of devices attached
df32588a	unauthorized
How do I authorise it?

Enable developper mode i guess...

EDIT :

@Lakotaubp said in Oneplus One installation failure:

@cliffcoggin There should be a popup window asking you to accept the connection. Pretty sure it's on the phone when you connect. Can't remember how long it remains visable.

Or that more probably...

Lakotaubp

@cliffcoggin There should be a popup window asking you to accept the connection. Pretty sure it's on the phone when you connect. Can't remember how long it remains visable.

Lakotaubp

Just did quick web search so you might want to try others but, with the device connected revoke usb debugging (switch it off or whatever) in Dev options then type in a terminal

adb kill-server
adb start-server

You should get asked to accept the connection. If you do then check with

adb devices

If not have a look on the web.

cliffcoggin

@Lakotaubp said in Oneplus One installation failure:

adb kill-server

Thanks. There was no request to accept connection.
The adb kill-server command gave me

adb kill-server
cannot connect to daemon at tcp:5037: Connection refused

domubpkm

@cliffcoggin Did you go through all the steps ?

unplug device
adb kill-server
adb start-server
plug device
Allow USB debugging in your device when popup

Lakotaubp

If that doesn't fix it would removing adb, updating the system and reinstalling adb fastboot work?

Edit: Or try another pc beginning to think it might be a Mint issue. Seem to remember using ubuntu sometimes instead.

cliffcoggin

Sorry chaps but I am getting nowhere, and I am not prepared to waste any more time on getting Ubuntu Touch on this phone. I still don't know it the fault is with me, the phone, the installer, or Mint. Sad to say this experiment is a failure. Thanks for your help.

stanwood

I understand you just have give up the installation process. I know it can be somehow tricky depending the device you are using... Believe me, I'm brand new through Linux (since last January), I don't have any computing skills at all, and it took me about 6 days to successfully migrate an old Galaxy Tab 3 to LineageOS. But at the end I ensure you it's really worth it...

Allow me just helping you with following elements:

ADB drivers (Android Debugging Bridge) as well as fastboot package generally MUST be previously installed on you computer. To install them, open terminal and type:

sudo apt install adb
sudo apt install fastboot

Restart your computer

Turn off device.
Press and keep vol+ and power about 10 seconds. Than release those bottoms. If you hold them pressed too long the device will boot normally.
When Bootloader (or TWRP in case of a former custom rom installed) appears:

Connect your device to USB. Open your terminal and type: sudo fastboot oem unlock

Run UBports Installer, select One Plus One manually in the list and start the installation. If possible, choose "wipe data"

Wait for about 10 minutes 'till the end of the installation process. (Files are 1rst copied to the mobile, than "updating device" will properly install UT)
Without those above steps, I would have been unable to install UT on my Nexus 5...

Good luck!

cliffcoggin

Thank for your revelations Stan, that the installer is not the entire answer to getting UT on the phone, and also that I have been holding buttons in for too long awaiting a response from the phone. If the UBPorts instructions had contained that information maybe I would have been successful, however I am now pursuing the purchase of a phone with Ubuntu Touch already installed.