"The" Bluetooth Thread
-
@Vehi_MV oh right
-
@Vehi_MV said in "The" Bluetooth Thread:
@advocatux
I think Bastos got autocorrected, it should be Pebble time round.Exactly. Sorry. This comes from quickly firing some thoughts...
-
My phone is a bq Aquaris E5HD ubuntu edition and now loaded with UBports image. My car is a Citroen C4 Picasso with the MyWay system from Harman. The version of this system is rneg_D_R50b_R50.03. That should be the newest one.
The behaviour is like this:
First when the two sides dont now eachother and starting the connection/ coupling from the car, all is working. It is possible to make calls and to see the addressbook of the phone.
After this when trying again the connection is not made anymore.
The phone says that the car is connected, but the car says the phone is coupled, but not connected and connection is not possible. -
Sorry, it must be
...First when the two sides dont know eachother...
-
@Nikfrager hi, unrelated to your problem but maybe you don't know this. If you want to edit a previous comment, click on those vertical 3 dots on the right hand side, near those upvote or downvote arrows.
-
A big thank you for all your work!
On Meizu Pro 5 I can connect to my Nokia J headset but when I attempt a phone call I can hear only noise.
-
@Bastos said in "The" Bluetooth Thread:
@Burak said in "The" Bluetooth Thread:
BT connection with Pebble Time Steel works fine (turned on all the time). Occasionally it looses the connection (watch warns me about). I need to turn off/on the app to reconnect.
Same for me with my pebble time round over RockWork
I am also using my Pebble Time Round with Rockwork on my OPO with UBports devel. When connected, it works fine, but every now and then the phonse loses contact with the watch. After that it is a nightmare to reconnect. I get multiple istances of Pebble Time F77D in the bluetooth settings and it won't connect properly. When that happens, I am prevented to "forget the device" from the settings and I have to fiddle a lot to get it to reconnect.
Another strange thing is that sometimes my bluetooth settings contain only one device - the watch - althoug I have two other. Rebooting the device once or sometimes twice resolves the issue and all my known bluetooth connections are visible in the settings. Only then will my Pebble watch connect properly.
-
The other issue I have is that I have yet to get audio work when connected the "My V70" Volvo car kit. It connects fine, but it is impossible to hang up a call from the car kit.
-
@Pet_HH
Update on actual status: Connections are working to Headset and others, i had to deactivate all the other BT surrounding and connect one item after the next. -
@guru said in "The" Bluetooth Thread:
@Leppa said in "The" Bluetooth Thread:
@alternatore said in "The" Bluetooth Thread:
Dunno why my previous message was deleted
Aren't you banned?
How many times this guy altern* will post the same stuff?
Matthias
As long as it takes. Admin(s) of this forum is quite ridiculous.
BT with Pioneer car stereo sometimes requires BT restart in tablet when using it with M10 FHD. It connects, but audio does not go through. Also connection time is pretty long ~10s.
-
I have a 2012 Ford Focus (SYNC) and a OnePlus One. The BT connection is OK once connected, however quite frequently when I have turned the ignition on, it may appear that they have automatically paired but when I play from Podbird or from the Music app, nothing happens.
I then have to (from the car console) disconnect the phone, begin to play something on the phone and then reconnect it. Once I've done this there's no further issue.
Unfortunately so far, calls don't seem to be working with either Mic or Speakers.
-
@MarkDJ said in "The" Bluetooth Thread:
I have a 2012 Ford Focus (SYNC) and a OnePlus One. The BT connection is OK once connected, however quite frequently when I have turned the ignition on, it may appear that they have automatically paired but when I play from Podbird or from the Music app, nothing happens.
I then have to (from the car console) disconnect the phone, begin to play something on the phone and then reconnect it. Once I've done this there's no further issue.
Unfortunately so far, calls don't seem to be working with either Mic or Speakers.
A couple of hours after posting the above, the BT connection to the car had a complete meltdown and refused to connect even after several restarts of the phone.
However the next day, it connected OK again and I was able to listen to audio from the phone. Suddenly a call comes in and lo and behold I was able to answer it from the steering wheel control! I had the call come through to the car speakers and the microphone was working too!
This is the first time I've had a successful hands-free phone call using the OnePlus One. I'm now guessing that there are intermittent issues with the BT connection between these devices.
-
At the moment I am testing a Jabra Drive. So this is a very standard car kit. No telephonebook or other fancy stuff. Only phonecalls. For now it looks good. It connects very fast. And the sound works!
But the first time I connected the device everything went very smooth. After someone called me the trouble began. Could not connect anymore. Pushing the button (for answering a call) I could only see the device connecting and then it was disconnected again.
So I tested a lot of things with the phone and the Jabra Drive. Nothing worked. Finaly I pushed the button again, for a very long time. Since then, everyting is fine again!I installed a log viewer. Now that the device works fine, I'm still keep getting errors for bluetooth: http://paste.ubuntu.com/25508920/
So, it is not rock sollid stable. But it works a lot better then my Parrot CK3100 which never gave any sound.
I wil keep you posted testing the device.UDPATE
Sad, but after one day the sound didn't work. Rebooting the Jabra solves the problem. So, not very reliable connections
-
Hi. It's been a long time since this topic was created, so I would like to know if any progress has been made on bluetooth connectivity with cars and hands free systems.
-
@Vehi_MV Currently we decided to wait for 16.04 as it will bring a new upstream version of Bluez stack, and then we will re-visit this long list of issues
BR
-
OnePlus One
Motorola Whisper HZ850
Bluetooth connectedReceived a phone call, did not hear ringing through earpiece, heard ringing from phone, loud. Pressing button did not answer like it did on the iPhone. After answering using the OnePlus One, Audio worked through the earpiece. Both in and out.
Basically audio works but not controls.
This was testing just a few days ago.
Edit, just saw last message, sorry lol
-
Hello Guys,
after some long time small update for this thread: As it seems, Bluez and all its problems in 15.04 might persist on 16.04, since it seems it has been backported from xenial to vivid. So we are in very small hope that things will improve. Sorry to not give a better answer at the moment. But we can finally only tell if its like this when 16.04 is out.
In the meanwhile I hacked around a small problem that might affect you also: https://forums.ubports.com/topic/1030/howto-change-the-name-of-your-device-for-bluetooth-pairing - Just to let you know we did not forget about Bluetooth
BR Florian
-
That's quite a sad news. I thought bluetooth will significantly improve in 16.04 considering that it is the latest LTS release.
Anyway, any chance we get the media controls working soon?
I bought a bluetooth headset a year ago and I've never used its media controls as I use it exclusively with my Ubuntu Phone
-
@kugiigi Hmm the latest LTS releases is 18.04
-
Hi,
i've a meizu pro 5, bluetooth is working fine with my music app but no with phone app, I hear a lot of noise and I notice that bluetooth speaker controller doesn't come up when I try to adjust volume with the physical buttons during a call. Is it possible that phone app doesn't use the right audio device during bluetooth connection?
thanks
