New, FLX1 with UT (and multi boot)
-
Does it make sense / Or is there a way to merge this discussion with this one?
https://forums.ubports.com/topic/10520/furiphone-flx1-with-furios
Or rather create a new device in the device list on this forum?
-
I think a new device in the list makes sense... maybe...
-
@stanwood I think it's better to keep two subjects one for UT and an other ("off topic") for FuriOS. Otherwise, it would be confusing.
Given multiboot is possible with FLX1, discussion about FuriOS may very well interest some people in this forum in the future. -
I have a FLX1, I will try this out....
-
@alaskalinuxuser I'm not sure there's any published way to install UT yet, unless there's something from the Furiphone people that I haven't seen. It's not in the installer.
But I will be very interested to hear your report if/when you're able to install! -
@wally Good point, just tried the installer, and you are correct, it is not listed as a device, even for choosing manually. The latest blog post from Furiphone said that dual boot of UT was now working, so I thought it was streamlined already. I am talking with "Jason" on Telegram currently who is walking me through it. I used to use UT years ago, but had to switch for other reasons. But if it will work now, that would be super!
-
Installation instructions:
From Jason: (https://t.me/ubports_porting/217354)
[In reply to alaskalinuxuser]
Yes pretty painless, but I found a workaround as it wasn't working as intended>- In Branchy select> Bootman gui> ubports
- Let it download and install
- Wait for Successful...
- Click OK
- In Bootman
- Name> Ubuntu Touch 2nd Local Partition
- Size:> 20.00 GiB
- Select Download Icon
- Select 2nd option> Ubuntu Touch
- Reboot
- In Boot Manager> Select Rootfs
- After start
- Bootman
- Select Download icon to install the software
- Wait for> Successfully installed Ubuntu Touch!
- Reboot
- Select 2nd option> Ubuntu Touch 2nd Local Partition
- Setup Ubuntu Touch
Rewriting the instructions to fill in the blanks for people like me who have no idea what we are doing....
- on the FLX1, open the terminal (or ssh to it from your computer)
- sudo apt update && sudo apt upgrade -y
- sudo apt install furios-app-branchy (This installs the branchy app on the phone screen.)
- In the branchy app, type bootman in the search to save you from scrolling. Select> Bootman gui> ubports
- Click apply, and let it download and install
- Wait for Successful...
- Click OK
- open the terminal (or ssh to it from your computer)
- sudo apt install furios-app-bootman (This installs the bootman app on the phone screen.)
- Open bootman app and click the + icon to add a boot option.
- Suggested settings:
-Name> Ubuntu Touch 2nd Local Partition
-Size:> 20.00 GiB
-You can choose where to install it, internal or external, I chose internal.
-Select Download Icon - It will say the download is qued. Now you need to reboot the phone, it will not install until you reboot.
- You will see the new boot manager, choose rootfs for now.
- When you log into your normal FLX1 furios, open the bootman app.
- Select the download button next to the Ubuntu Touch 2nd Local Partition. It will give you a drop down, select Ubuntu Touch (the alternative is another Furios).
- It will show a pop up with a progress bar as it downloads the 3.5GB file. Wait for it to complete.
- Now it will start installing that file, and then will prompt you several times for your Furios pin/password because it is running various commands as sudo. Enter your password/pin and let it complete. Eventually, it will say it was sucessful.
- Reboot the phone.
- On the bootman screen, select the Ubuntu Touch boot partition.
- Setup and enjoy Ubuntu Touch!
-
Initial impressions are great!
There were two updates as soon as I booted, the camera app was one, and you do need it for it to work properly, so I installed it, and then the camera had issues with video recording, but the app suggested I restart the phone, which fixed it.
So, initial testing, the camera took pictures front facing, rear facing, and took video with sound. There is a slight delay when you select record for the video recording, it hangs almost long enough for you to think it froze, then it starts recording and updating the viewer screen. Same pause when you stop recording video, it looks like it hangs for a few seconds, then is fine.
Sound worked, the screen was good and responsive, touch worked, all the usual stuff just worked! WiFi was good.
I turned it off, put in my sim card, booted up, picked up my carrier right away. Data worked. I could not make a phone call, but that is not UT's fault. My carrier still uses 3g towers, and the FLX1 does not support my local 3g tower bands. So that is not Ubuntu Touch's fault.
Now I just have to check on how UT handles SIP calls, as I use that. But yeah, seems to be working great overall!
-
@alaskalinuxuser I'm very impressed to see that Ubuntu Touch works on the Furiphone FLX1, which is also Dual Boot!
4G calls (VoLTE) are now supported by Ubuntu Touch, but this has to be ported specifically to each device. This is the implementation of an IMS technology plugin in the Ofono module. (I don't know what the situation is with the FLX1, but it must be feasible).
Out of curiosity, do you know which update channel the device depends on? Will it be upgraded to Noble as well?
-
@stanwood I do not know about the update channels. Sorry, I'm not very knowledgeable. Interesting about the VoLTE, glad to hear that UT got it worked out, on a per phone basis. I hope that they work it out on the FLX1 soon.
But, for those wondering, my JLAB Bluetooth headphones connect and work great! If there is anything else folks are wondering about testing, let me know, I can try it out (unless it is a specific Bluetooth item, as I don't own every Bluetooth device...).
