Dekko2 Developer Community Thread

guru · 22 Feb 2019, 06:47

When I have my FreeBSD laptop or netbook (Acer C720) running, I use mutt, if not I use Dekko since 2015. I even ported mutt to my E4.5 running UT. This was lost when I moved to UBports, but I will definitely recompile it again in a chrooted env because Dekko2 is missing some essential features, for example 'view source' of the mail.

libremax · 22 Feb 2019, 10:07

@guru said :

Btw: Are there any other users of Dekko here?

I have been using dekko/dekko2 regularly for four years but only for reading emails.

MK73 · 22 Feb 2019, 15:22

@libremax I am using also for sending, I have the standard problem that it does not pick up the e-mail from contacts and than to send an e-mail I have to play rotating the screen.

Also if I want to answer some e-mail it is better to do it from the incoming list (swiping from right and selecting the action to be done) than clicking on reply when inside of the e-mail. This way it works perfect, the e-mails are queued and sent.

Also now with the suru-dark theme I have set with Ubuntu Tweek tool app I notice I can not read well the insert e-mail cells as they are very blank, white.

Thanks for all the done work and improvements, and happy Dan Chapmann is slowly back. My best regards for all of you.

arubislander · 23 Feb 2019, 16:07

I use Dekko2 daily on my tablet and mobile phone. I must admit though that I read more mails than I send, so I do not encounter many of the issues you do.

guru · 23 Feb 2019, 16:28

Reading works mostly (if I do not count rendering problems and crashes/freezes). But, sending is nearly impossible. This morning I wanted to forward a message to my wife because I got the tickets of her flights. It crashed three times on sending the same mail, I gave up. That's why I have had this horrible stupid idea to wipe the cash with the result that all config was wiped too. See here: https://gitlab.com/dekkoproject/dekko/issues/138

guru · 3 Mar 2019, 08:35

Hello,

Are there any plans or milestones for an update of Dekko2? For weeks I do not see any movement in the list of issues in https://gitlab.com/dekkoproject/dekko/issues
only new issues from time to time.

This morning I used the old Dekko in my BQ M10 which still runs the latest beta release of Canonical (I was one of the Beta-tester-group). Is it possible to port the old Dekko to UBports OTA-7 or are there any missing infrastructure pieces?

matthias

domubpkm · 3 Mar 2019, 14:02

@guru What we can see : https://gitlab.com/groups/dekkoproject/-/milestones

guru · 3 Mar 2019, 16:44

@domubpkm said in Dekko2 Developer Community Thread:

@guru What we can see : https://gitlab.com/groups/dekkoproject/-/milestones

What do the expired milestones mean, and the first non-expired w/o any issue?

And, can you answer my other question re/ the old Dekko? Thanks.

domubpkm · 3 Mar 2019, 17:37

@guru Sorry i can't say you more that what i see : It is only a gitlab link which is accessible by everybody. Milestones were planed by Dan Chapman. As you surely know, expired means : not delivered at the planned date. Only him or somebody who knows could bring more detailed answers to your questions.

guru · 18 Mar 2019, 19:37

Is there any chance that anybody says something about the future of Dekko2 in UBports?

Thanks

matthias (using an UT M10 FHD, which still runs nicely Dekko)

libremax · 18 Mar 2019, 19:54

@guru said in Dekko2 Developer Community Thread:

Is there any chance that anybody says something about the future of Dekko2 in UBports?

The last words I saw about that :

"[More information about Dekko2 development.

Dan is extremely busy with it. He is moving Oxide dependent elements towards support by qtwebengine. Not an easy task. If you want to help out, contact him at dekkoproject.org.](https://ubports.com/fr_FR/blog/notre-blog-1/post/ubuntu-touch-q-a-45-210)"

guru · 8 May 2019, 18:00

I have another new issue with Dekko2 and will file later a bug issue. In my IMAP mailbox sits a mail (sent by me from my company account to transfer two data files). This mail is presented in the list view of the mails without:
Subject:
From:
two lines of body preview
Only the avatar, the info icon for attachments and the time of sending is shown.
Selecting this mail for view makes Dekko2 crash.

In my MUA mutt the mail looks like this:

Date: Wed, 8 May 2019 13:27:05 +0000
From: "Apitz,Matthias" <Matthias.Apitz@oclc.org>
To: "guru@unixarea.de" <guru@unixarea.de>
Subject: EGV
    
[-- Attachment #1 --]
[-- Type: text/plain, Encoding: quoted-printable, Size: 0,4K --]
    
    
    
    Vy 73
         
             matthias
--
Matthias Apitz
Development Lead SunRise - OCLC GmbH
mobile +49-170-4527211 UNIX since V7 on PDP-11, UNIX on mainframe since ESER 1055 (IBM /370) UNIX on
x86 since SVR4.2 UnixWare 2.1.2, FreeBSD since 2.2.5
What's the definition of a Legacy System?   -- One that works!
    
    
[-- Attachment #2: EigentuemerVersammlung.jpg --]
[-- Type: image/jpeg, Encoding: base64, Size: 326K --]
    
[-- image/jpeg is unsupported (use 'v' to view this part) --]
    
[-- Attachment #3: EigentuemerVersammlung.odt --]
[-- Type: application/octet-stream, Encoding: base64, Size: 17K --]

I could provide off-forum the full mail for debugging if someone is interested.

guru · 13 May 2019, 08:19

I've posted this in Support in the thread OTA-9 && battery drain, but I think it goes better here:

I'm far away from saying that there is no bug in Dekko2, but if finding below is a bug in Dekko2 or a new bug/feature/behavior in the OS is unclear. The high CPU utilization of dekkod is a result of reading from time to time again through one of its database files /home/phablet/.cache/dekko2.dekkoproject/database/qmailstore.db (39 MByte in size) with tons of llseek(2) and read(2) syscalls:

[pid 22511] _llseek(9, 20623360, [20623360], SEEK_SET) = 0
[pid 22511] read(9, "\r\0\0\0\1\1o\0\1o\1\27\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1024) = 1024
[pid 22511] _llseek(9, 20625408, [20625408], SEEK_SET) = 0
[pid 22511] read(9, "\r\0\0\0\1\1v\0\1v\2\214\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1024) = 1024
[pid 22511] _llseek(9, 22777856, [22777856], SEEK_SET) = 0
[pid 22511] read(9, "\r\0\0\0\1\1s\0\1s\2\214\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1024) = 1024
[pid 22511] _llseek(9, 20626432, [20626432], SEEK_SET) = 0
[pid 22511] read(9, ^C"\r\0\0\0\1\1s\0\1s\2\225\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1024) = 1024
...

In it log file it says about this:

[22511] May 13 07:24:41 [Debug] Action completed 96684008800466 result success
[22511] May 13 07:26:39 [Warning] Would not determine server/action completing
[22511] May 13 07:26:39 [Warning] Would not determine server/action completing
[22511] May 13 07:26:40 [Debug] Running action ExportUpdatesRequest 96684008800468
[22511] May 13 07:26:40 [Debug] Running action ExportUpdatesRequest 96684008800469
[22511] May 13 07:26:41 [Warning] Unable to process malformed message removal record for account 4
[22511] May 13 07:26:41 [Warning] Unable to process malformed message removal record for account 4
[22511] May 13 07:26:41 [Warning] Unable to process malformed message removal record for account 4
[22511] May 13 07:26:41 [Warning] Unable to process malformed message removal record for account 4
[22511] May 13 07:26:41 [Warning] Unable to process malformed message removal record for account 4
....

I think it's time to remove the Dekko2 installation completely and start again from scratch. The PITA is that there is no way to keep the configuration, one must configure all by hand from scratch. And this (mixing config values with data) is really a bug in Dekko2.

guru · 21 May 2019, 09:15

I have configured three IMAP+SMTP account in Dekko2 and set the Check interval (minutes) to 60 , hoping with 60 that the interval was in seconds, but not:

phablet@ubuntu-phablet:~$ grep 'Running action' dekkod.log
[13041] May 21 10:52:08 [Debug] Running action RetrieveMessageListRequest 56010668507137
[13041] May 21 10:52:08 [Debug] Running action RetrieveMessageListRequest 56010668507138
[13041] May 21 10:52:08 [Debug] Running action RetrieveMessageListRequest 56010668507139
[13041] May 21 10:53:28 [Debug] Running action RetrieveNewMessagesRequest 56010668507140
[13041] May 21 10:58:18 [Debug] Running action RetrieveNewMessagesRequest 56010668507141
[13041] May 21 10:58:23 [Debug] Running action RetrieveNewMessagesRequest 56010668507142
[13041] May 21 10:59:30 [Debug] Running action RetrieveNewMessagesRequest 56010668507143
[13041] May 21 11:01:41 [Debug] Running action RetrieveNewMessagesRequest 56010668507144
[13041] May 21 11:01:58 [Debug] Running action RetrieveNewMessagesRequest 56010668507145
[13041] May 21 11:03:02 [Debug] Running action RetrieveMessageListRequest 56010668507146
[13041] May 21 11:04:12 [Debug] Running action RetrieveMessageListRequest 56010668507147
[13041] May 21 11:04:15 [Debug] Running action RetrieveMessageListRequest 56010668507148
[13041] May 21 11:04:37 [Debug] Running action RetrieveMessageListRequest 56010668507149
[13041] May 21 11:04:39 [Debug] Running action RetrieveMessageListRequest 56010668507150
[13041] May 21 11:04:41 [Debug] Running action RetrieveMessageListRequest 56010668507151
...

i.e. it tries every few seconds to get new messages. Why?

hummlbach · 21 May 2019, 11:52

@guru said in Dekko2 Developer Community Thread:

I have configured three IMAP+SMTP account in Dekko2 and set the Check interval (minutes) to 60 , hoping with 60 that the interval was in seconds, but not:

Ýou mean minutes not seconds right?

i.e. it tries every few seconds to get new messages. Why?

Not sure what you've done there (was your device turned on? were you using dekko in the meanwhile? was your network connection okay? have you restarted dekkod after you changed the config?) and there is not much left over from the log here...

I have two account configured and the interval set to 5 (minutes) and i can find this 5 minute cycle in the log. Here's a snippet how it looks like:

[3564] Mai 21 12:51:59 [Debug] Messaging :  Push email established for account 2 "privat"
[3564] Mai 21 12:51:59 [Debug] Action completed 15307263443778 result success
[3564] Mai 21 12:51:59 [Debug] IMAP :  "11" SEND a007 LOGOUT
[3564] Mai 21 12:51:59 [Debug] IMAP :  "11" RECV: * BYE Logging out
[3564] Mai 21 12:51:59 [Debug] IMAP :  "11" RECV: a007 OK Logout completed.
[3564] Mai 21 12:52:22 [Debug] IMAP :  "I:33" RECV: * OK Still here
[3564] Mai 21 12:53:01 [Debug] IMAP :  "I:32" RECV: * OK Still here
[3564] Mai 21 12:54:22 [Debug] IMAP :  "I:33" RECV: * OK Still here
[3564] Mai 21 12:55:02 [Debug] IMAP :  "I:32" RECV: * OK Still here
[3564] Mai 21 12:56:22 [Debug] IMAP :  "I:33" RECV: * OK Still here
[3564] Mai 21 12:56:59 [Debug] Running action ExportUpdatesRequest 15307263443779
[3564] Mai 21 12:56:59 [Debug] Messaging :  Setting imap strategy 25ImapExportUpdatesStrategy
[3564] Mai 21 12:56:59 [Debug] IMAP :  "11" About to open connection ...

guru · 21 May 2019, 12:08

@hummlbach said in Dekko2 Developer Community Thread:

I have configured three IMAP+SMTP account in Dekko2 and set the Check interval (minutes) to 60 , hoping with 60 that the interval was in seconds, but not:

Ýou mean minutes not seconds right?

No. First I have had set to 5 and as I could not see the 5-minutes break I thought, maybe it is meant in seconds (even if it says in minutes) and that's why I set it to 60 in the hope of 1 minute.

I will test again because I did not restarted dekkod after the change of the interval.

guru · 22 May 2019, 09:33

I did:

reconfigured all three account to 5 minute IMAP poll
deleted the dekkod.log
stoped dekkod
restarted Dekko2 app
Connection was fine on datamobile and suspend of the device set to off.

Below you will find a grep of the dekkod.log for the line Running action and the line after which shows the IMAP account number.

The polling is not regular every 5 minutes.


$ grep -A1 "Running action" dekkod.log | sed 's/tion .*$/tion .../'

[11971] May 22 10:17:57 [Debug] Running action ...
[11971] May 22 10:17:57 [Debug] IMAP :  "1" About to open connection ...
[11971] May 22 10:17:57 [Debug] Running action ...
[11971] May 22 10:17:57 [Debug] IMAP :  "2" About to open connection ...
[11971] May 22 10:17:57 [Debug] Running action ...
[11971] May 22 10:17:57 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:18:13 [Debug] Running action ...
[11971] May 22 10:18:13 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:20:33 [Debug] Running action ...
[11971] May 22 10:20:33 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:20:43 [Debug] Running action ...
[11971] May 22 10:20:43 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:23:07 [Debug] Running action ...
[11971] May 22 10:23:07 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:23:09 [Debug] Running action ...
[11971] May 22 10:23:09 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 10:23:17 [Debug] Running action ...
[11971] May 22 10:23:17 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:23:28 [Debug] Running action ...
[11971] May 22 10:23:28 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 10:23:30 [Debug] Running action ...
[11971] May 22 10:23:30 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:23:38 [Debug] Running action ...
[11971] May 22 10:23:38 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:23:53 [Debug] Running action ...
[11971] May 22 10:23:53 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:28:02 [Debug] Running action ...
[11971] May 22 10:28:02 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:28:39 [Debug] Running action ...
[11971] May 22 10:28:39 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 10:28:47 [Debug] Running action ...
[11971] May 22 10:28:47 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 10:29:03 [Debug] Running action ...
[11971] May 22 10:29:03 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:29:05 [Debug] Running action ...
[11971] May 22 10:29:05 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:30:29 [Debug] Running action ...
[11971] May 22 10:30:29 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:30:44 [Debug] Running action ...
[11971] May 22 10:30:44 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:31:15 [Debug] Running action ...
[11971] May 22 10:31:15 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:33:51 [Debug] Running action ...
[11971] May 22 10:33:51 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 10:33:59 [Debug] Running action ...
[11971] May 22 10:33:59 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 10:34:07 [Debug] Running action ...
[11971] May 22 10:34:07 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:34:16 [Debug] Running action ...
[11971] May 22 10:34:16 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:36:22 [Debug] Running action ...
[11971] May 22 10:36:22 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:36:30 [Debug] Running action ...
[11971] May 22 10:36:30 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:36:33 [Debug] Running action ...
[11971] May 22 10:36:33 [Debug] IMAP :  "3" SEND a004 SELECT Archive
--
[11971] May 22 10:39:05 [Debug] Running action ...
[11971] May 22 10:39:05 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 10:39:18 [Debug] Running action ...
[11971] May 22 10:39:18 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 10:39:21 [Debug] Running action ...
[11971] May 22 10:39:22 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:39:27 [Debug] Running action ...
[11971] May 22 10:39:27 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:40:29 [Debug] Running action ...
[11971] May 22 10:40:29 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:42:19 [Debug] Running action ...
[11971] May 22 10:42:19 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:42:26 [Debug] Running action ...
[11971] May 22 10:42:26 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:42:36 [Debug] Running action ...
[11971] May 22 10:42:36 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:42:50 [Debug] Running action ...
[11971] May 22 10:42:50 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:44:26 [Debug] Running action ...
[11971] May 22 10:44:26 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 10:44:33 [Debug] Running action ...
[11971] May 22 10:44:33 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:44:57 [Debug] Running action ...
[11971] May 22 10:44:57 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 10:44:59 [Debug] Running action ...
[11971] May 22 10:44:59 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:45:28 [Debug] Running action ...
[11971] May 22 10:45:28 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:46:33 [Debug] Running action ...
[11971] May 22 10:46:33 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:47:56 [Debug] Running action ...
[11971] May 22 10:47:56 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:48:04 [Debug] Running action ...
[11971] May 22 10:48:04 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:48:07 [Debug] Running action ...
[11971] May 22 10:48:07 [Debug] IMAP :  "3" SEND a004 SELECT Archive
--
[11971] May 22 10:50:08 [Debug] Running action ...
[11971] May 22 10:50:08 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 10:50:15 [Debug] Running action ...
[11971] May 22 10:50:15 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 10:51:54 [Debug] Running action ...
[11971] May 22 10:51:54 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:51:55 [Debug] Running action ...
[11971] May 22 10:51:55 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:53:34 [Debug] Running action ...
[11971] May 22 10:53:34 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:53:42 [Debug] Running action ...
[11971] May 22 10:53:42 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:53:45 [Debug] Running action ...
[11971] May 22 10:53:45 [Debug] IMAP :  "3" SEND a004 SELECT Archive
--
[11971] May 22 10:55:18 [Debug] Running action ...
[11971] May 22 10:55:18 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 10:55:24 [Debug] Running action ...
[11971] May 22 10:55:24 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 10:55:28 [Debug] Running action ...
[11971] May 22 10:55:28 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:56:58 [Debug] Running action ...
[11971] May 22 10:56:58 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:57:09 [Debug] Running action ...
[11971] May 22 10:57:09 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 10:57:37 [Debug] Running action ...
[11971] May 22 10:57:37 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:57:45 [Debug] Running action ...
[11971] May 22 10:57:45 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 10:57:47 [Debug] Running action ...
[11971] May 22 10:57:47 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 11:00:26 [Debug] Running action ...
[11971] May 22 11:00:27 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 11:00:28 [Debug] Running action ...
[11971] May 22 11:00:28 [Debug] IMAP :  "2" About to open connection ...
--
[11971] May 22 11:01:22 [Debug] Running action ...
[11971] May 22 11:01:22 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 11:01:31 [Debug] Running action ...
[11971] May 22 11:01:31 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 11:01:38 [Debug] Running action ...
[11971] May 22 11:01:38 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 11:01:44 [Debug] Running action ...
[11971] May 22 11:01:44 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 11:01:50 [Debug] Running action ...
[11971] May 22 11:01:50 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 11:02:24 [Debug] Running action ...
[11971] May 22 11:02:24 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 11:02:30 [Debug] Running action ...
[11971] May 22 11:02:30 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 11:02:36 [Debug] Running action ...
[11971] May 22 11:02:36 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 11:02:39 [Debug] Running action ...
[11971] May 22 11:02:39 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 11:02:49 [Debug] Running action ...
[11971] May 22 11:02:49 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 11:02:49 [Debug] Running action ...
[11971] May 22 11:02:49 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 11:02:52 [Debug] Running action ...
[11971] May 22 11:02:52 [Debug] IMAP :  "1" About to open connection ...
--
[11971] May 22 11:02:55 [Debug] Running action ...
[11971] May 22 11:02:55 [Debug] IMAP :  "3" About to open connection ...
--
[11971] May 22 11:02:58 [Debug] Running action ...
[11971] May 22 11:02:59 [Debug] IMAP :  "3" About to open connection ...

domubpkm · 3 Jun 2019, 09:17

Thank you to Nicholas wiseman and his 'coach' (is that it ?) @hummlbach for the recent Suru Dark support. It's nice.

stefwe · 3 Jun 2019, 10:22

A big thank you from me too! Good work!

domubpkm · 3 Jun 2019, 18:56

Accuracy : Of course, the thanks go to all those who make DEKKO 2 better (whether or not i know that they are working on this or that improvement) but this time more specifically to those who have set up the Suru Dark support !! because it's cool !