Ubuntu Touch Programming Course

mimecar · 6 Feb 2018, 21:01

@nithin, Have you done all the steps in the "Running the Application on a Real Device" section?
https://mimecar.gitbooks.io/ubuntu-touch-programming-course/content/en/chapter-02.html

On the screen of Ubuntu devices you should get your phone.

Nithin · 2 Jul 2018, 12:57

Not yet I was still trying to run it on my desktop. When that didn't work i didn't try running it on my Phone. The "Running on your device" section comes after that.

Nithin · 2 Jul 2018, 19:57

Tried running it on the device. after activating developer mode, the SSH notification doesn't appear at all. Also i tried installing Ubuntu sdk again. At the step

sudo apt-get install ubuntu-sdk

i get the following error

The following packages have unmet dependencies:
ubuntu-sdk : Depends: ubuntu-sdk-libs-dev but it is not going to be installed
E: Unable to correct problems, you have held broken packages.

Nithin · 10 Feb 2018, 21:42

Assuming Kubuntu being a possible cause for the problem, I decided to try it out on Kde Neon and Ubuntu. Kde Neon again seemed to have the same problem of not wanting to install dependencies. So then I Installed Ubuntu and tried the same on it. only to encounter some other errors, here are a few ones.

during

sudo lxd init
in the question on default storage back-end to use, Ubuntu wouldn't take zfs for an option for some reason.
so had to then use the command
sudo add-apt-repository ppa:ubuntu-lxc/lxd-stable
this doesnt work either. instead one has to use
sudo add-apt-repository ppa:ubuntu-lxc/stable

After this there was no zfs option available at all.
so had to use this

sudo apt install -t xenial-backports lxd lxd-client

after all of this i am back to the same problem which i faced in the first step.

I am trying to follow the tutorial here and managed to install the new Ubuntu Sdk. When I run or build the app i get the following messages

in Issues> error: There was a error in the device detection of desktop, no IP address was returned.
in application output> Application failed to start: No private key file given.

As a last step will try compiling the clock app as mentioned in the Readme.Developers.

mimecar · 11 Mar 2018, 13:12

Good evening.

I have uploaded the translation of the chapter "Formatting label and events". I'll upload the source code next week. I have another collaboration from Fulvio pending and I hope to upload it next week.
https://mimecar.gitbooks.io/ubuntu-touch-programming-course/content/en/chapter-04-s03.html

Talkless · 15 Mar 2018, 19:20

@nithin said in Ubuntu Touch Programming Course:

After this there was no zfs option available at all.
so had to use this

sudo apt install -t xenial-backports lxd lxd-client

Thanks! Using lxd from xenial-backports helped to overcome that Creating the bridge failed with: not implemented issue.

It would be nice to have this hint in Course.

Pulsar33 · 15 Mar 2018, 20:13

@mimecar : following you.
Thanks for your work !
Pulsar33

Pulsar33 · 4 Apr 2018, 07:37

@tischlerwilly @mimecar : Error No Storage Pool Found
As said by tischlerwilly, I have the same error when installing the developper kits :

~~I'm also using MINT 18(.3) 64bits. Did you find the solution, please ?~~
Best regards
Pulsar33

Oooops ! See below ...

Pulsar33 · 4 Apr 2018, 07:48

@mimecar @HendriXXX @TischlerWilly :

Hello,
Sorry, I've discovered that when I search for something with CTRL-F in a long thread with Firefox, the process doesn't see all the content. So at the beginning of the thread, searching for "pool", I found only the posts of TischlerWilly and mimecar but no complete answer.
This is why I thought there was no answer ...
If I go at the end of the thread, I find the answers of HendriXXX and mimecar, so I'll give a try to the solution and report here how it goes.
Have a nice day
Pulsar33

Pulsar33 · 4 Apr 2018, 09:17

@mimecar said in Ubuntu Touch Programming Course:

sudo add-apt-repository ppa:ubuntu-lxc/lxd-stable

This command returned an error. I tried this instead :

sudo add-apt-repository ppa:ubuntu-lxc/stable

I hope it was the good choice. Next I followed the proposal of HendriXXX :

sudo chown lxd:lxd /var/lib/lxd/unix.socket

All the process worked and my kits are created now.
However, I didn't see the error "container is faulty"
Proceeding to the next steps ...
Best regards
Pulsar33

gsilvapt · 4 Apr 2018, 23:01

This may seem off-topic, but way a custom PPA when LXC and LXD are available in the repositories?

Pulsar33 · 4 Jun 2018, 08:03

@mimecar : Hello
I've been able to generate Hello Word and Calculator applications.
All is perfectly clear and well explained. Thank you !

However, I'm facing three errors as described below. Maybe are they due to the same reason.

When I create a project, only 14.10 or 14.04 options are available :
If I check the kits in Compile & Execute, I see a warning about path not matching :
Moreover, each time I launch Qt Creator, an update is proposed for each kit and errors occur.
Showing details, several tranfers are not available and tasks end with errors:
[...]
Ign http://archive.ubuntu.com vivid-security/restricted Translation-en
Ign http://archive.ubuntu.com vivid-security/universe Translation-en
Err http://archive.ubuntu.com vivid/main Sources 404 Not Found [IP: 91.189.88.161 80]
Err http://archive.ubuntu.com vivid/restricted Sources 404 Not Found [IP: 91.189.88.161 80]
Err http://archive.ubuntu.com vivid/universe Sources 404 Not Found [IP: 91.189.88.161 80]
Err http://archive.ubuntu.com vivid/multiverse Sources 404 Not Found [IP: 91.189.88.161 80]
Err http://archive.ubuntu.com vivid/main amd64 Packages 404 Not Found [IP: 91.189.88.161 80]
[...]
Err http://archive.ubuntu.com vivid-security/multiverse amd64 Packages 404 Not Found [IP: 91.189.88.161 80]
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/vivid/main/source/Sources 404 Not Found [IP: 91.189.88.161 80]
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/vivid/restricted/source/Sources 404 Not Found [IP: 91.189.88.161 80]
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/vivid/universe/source/Sources 404 Not Found [IP: 91.189.88.161 80]
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/vivid/multiverse/source/Sources 404 Not Found [IP: 91.189.88.161 80]
[...]
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/vivid-security/multiverse/binary-amd64/Packages 404 Not Found [IP: 91.189.88.161 80]
E: Some index files failed to download. They have been ignored, or old ones used instead.
---Task exited with errors, please check the output---

As far as ipvoid knows, the faulty IP is :
IP Address: 91.189.88.161
Hostname: keeton.canonical.com
Organization: Canonical Group Limited
ASN: AS41231 Canonical Group Limited
Continent: Europe (EU)
Country: United Kingdom (GB)
Latitude\Longitude: 51.5142 / -0.0931
Region: England
City: London

It seems that this must be solved to continue learning how to create my own applications. Have you a solution please ?
Have a nice day.
Pulsar33

advocatux · 6 Apr 2018, 11:24

@pulsar33 Vivid reached End of Life in February 4, 2016. You need to replace all the archive.ubuntu.com with old-releases.ubuntu.com in your sources.list

Pulsar33 · 4 Jul 2018, 16:02

@advocatux @mimecar : Hello
Thank you for the reply, however I'm not sure to know what to do now. As far as I understand, the problem is to update the kits, not my system which is perfectly up to date (I use MINT18.3). I've searched the whole GUI of Qt Creator but not found how to specify the sources.

Where are defined the sources for the kits ?

Moreover, why am I the first to have the problem following the Programming Course if the end of life of Vivid was in February 2016 ?

Good evening
Pulsar33

Talkless · 8 Apr 2018, 11:27

@pulsar33 said in Ubuntu Touch Programming Course:

As far as I understand, the problem is to update the kits, not my system which is perfectly up to date

It seem so. I guess we need to update /etc/apt/sources.list inside lxd contaner used for building?

Talkless · 4 Aug 2018, 11:59

I did this:

Enter container with lxc exec device-armhf -- /bin/bash
Replace archive into old-releases in sources.list with sed -i "s|archive|old-releases|" /etc/apt/sources.list

But after that, running apt update inside container, I get errors about ports.ubuntu.com/ubuntu-ports/dists/vivid/... (404 Not Found), while old-releases works fine for other repositories.

There are in fact no vivid in this repo:
http://ports.ubuntu.com/ubuntu-ports/dists/

So what cane ports host be changed into? Is there archive as that old-releases somewhere?

chris · 4 Aug 2018, 13:21

@talkless In my containers I replaced all urls by http://old-releases.ubuntu.com/ubuntu
also the ports ones
vivid vivid-security vivid-backports vivid-updates (main / multiverse / restricted / universe) are all included there

Talkless · 8 Apr 2018, 13:50

@chris said in Ubuntu Touch Programming Course:

@talkless In my containers I replaced all urls by http://old-releases.ubuntu.com/ubuntu
also the ports ones
vivid vivid-security vivid-backports vivid-updates (main / multiverse / restricted / universe) are all included there

But there's no ubuntu-ports repository (directory) inside http://old-releases.ubuntu.com/

Pulsar33 · 8 Apr 2018, 15:04

@talkless @chris @mimecar : Well shot Guys !
Thank you for the tip. I didn't try for the armhf-device kit but I succeed for the desktop kit. In fact, the configuration is different for the two kits and the desktop kit only involves "archive". So the tip of @Talkless was clean and the (long) update took place without error.

101 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 95.3 MB of archives. After this operation, 36.1 MB of additional disk space will be used.
[...]
Get:103 http://ppa.launchpad.net/ci-train-ppa-service/stable-phone-overlay/ubuntu/ vivid/main unity8-private amd64 8.15+15.04.20161129-0ubuntu1 [584 kB]
[...]
Processing triggers for libc-bin (2.21-0ubuntu4.0.1) ...
---Task exited with no errors---
Most updates are from ci-train-ppa-service ...
The HelloWorld example compiles and runs without problem.

Upon the next launch of Qt Creator, only the armhf-device update is proposed.
Finding ports.ubuntu.com correct source may solve the last problem.

Good evening
Pulsar33

Pulsar33 · 10 Apr 2018, 23:35

Hello,
I'm not sure I've done the right things and I hope a "guru" will warn me if necessary but I found how to update the device-armhf kit :

Then, the (long) update ends with no error.

This seems fine but I must now understand why all my choices are for 14-10 framework despite the fact that my kits are made with 15-04 framework ...

Solution is welcome !
Best regards
Pulsar33