Pinephone (braveheart)

Keneda · 7 Apr 2020, 22:10

And you can save your data before updating... and restore them using SSH if you want.

Not only SSH, they are multiple ways to do so, more or less user friendly, :grimacing_face:

@Fla
I'm running UTouch as a daily driver since 2015 :grinning_face_with_smiling_eyes:

Fla · 10 Apr 2020, 17:07

@Fla
I'm running UTouch as a daily driver since 2015 :grinning_face_with_smiling_eyes:

I'm running it as a daily driver for one year, but on the FP2 which has OTA updates. I'm talking about the PinePhone here

negations · 5 Jul 2020, 12:28

@Flohack Apologies for posting this here. I have tried to register on the gitlab site but so far it is refusing my registration. On there, issue # 78 shows a picture of vertical lines running down the phone. I had that for a bit, but now, with download 280, or thereabouts, they are visible (though faint), but only on the login screen. The screen flickers a lot too. Just posting as Dalton said on the ticket that no-one else had reported a similar issue with their Braveheart. Sorry, image not the best.

No longer the case since about #290

camsonne · 18 Apr 2020, 22:19

Hello,

I had Ubunto touch running with a February 8th image, I just tried flashing the latest one (April 18th ) and it does not boot. Are there known issue with latest build ? Is there one from a particular date I should try. I flashed the old image from Feb 8th and it did boot fine.

Thank you,

Alexandre

Marathon2422 · 2 May 2020, 22:59

i have UT on BH pinephone emmc , lost wifi ,after being off for a few hours , could not get it to find any wifi signals at all.
looks like i need to reinstall or go back to sdcards

stanwood · 2 May 2020, 23:22

@Marathon2422 Even after reboot?

AppLee · 3 May 2020, 08:33

@Marathon2422
The wifi drivers has many issues.
Have a look at gitlab there is a ticket and a workaround this issue.

Marathon2422 · 5 Jun 2020, 14:46

@AppLee
I tried the usuall things then decided to flash #310 to emmc , but it would not recognise mmcblk0 and ssh would not connect.
So I tried Jumpdrive, on an sdcard and #310 .img from my PC , very simple ,what was all the fuss about .
Worth testing ,if you have not tried it.
(From #306 )

Marathon2422 · 5 Jun 2020, 02:48

Trying build #7
on my BH pinephone
via SDcard
I like the pinecone screen start
there is the" update " in the usual place
and update in. "about " /" update"
lot of little changes .
Nice Work guys

PINE64 · 6 May 2020, 10:30

For those playing along at home, images which feature OTA updates and more can now be downloaded here

Marathon2422 · 6 May 2020, 14:45

@PINE64 got # 7 on SDcard ,looking good

Marathon2422 · 6 May 2020, 20:56

( not my daily driver) But : build #7 (BH-Pinephone )
i have not been able to use the phone "network " i have reset APN`s , on reboot they are gone, or i cannot get the check mark to stay there.
i use consumer cellular,( att ) usually pretty straight forward ?
anyone else or ----

Marathon2422 · 7 May 2020, 13:34

OTA update first one
#7 to #9 on emmc
nice install screen
successful yahoo

try to get my at&t sim working later
( consumer cellular )

AppLee · 7 May 2020, 19:02

@Marathon2422
Hi
I installed build #8 and #9 to an sdcard, it's really hard to boot to the OS I had to try tens of time to pass the "get started"...
Did you have the same issue ?
And out of curiosity how did you put the OS to the eMMC ? Using dd or other ?

Giiba · 7 May 2020, 20:05

I just flashed #9 to the emmc this morning and I must say the OS is looking much better.I haven't touched the phone for a month but progress has clearly been made.

Nice work devs!

Marathon2422 · 5 Jul 2020, 20:17

@AppLee the first time /emmc/ #7 on my pc ,extracted, and jumpdrive on sdcard , connected to pc then started pinephone, and used Balena-etcher to install ,takes 18 minutes ,because of the size.
2nd time #8 onto sdcard using Balena-etcher , because i couldnt get the sim / apn to work and didnt want to mess with the emmc

used OTA function to upgrade #7 on emmc to #9 ( worked a treat ),
whilst changing sources ,it started downloading ,i could not see the download indicator immediately, once i did , i left it alone.

if you use jumpdrive for another OS, may be better to adjust the size, before you start

Marathon2422 · 7 May 2020, 20:18

@Giiba
have you tried a sim yet ?

Marathon2422 · 7 May 2020, 20:47

just curious, version numbering gitlab #9 shows download version 19 on the pinephone , ?

Giiba · 8 May 2020, 02:26

@Marathon2422 said in Pinephone (braveheart):

I have not due to the poor battery life. I need a phone so my OPO has the sim card.

This switch to OTA updates makes me more willing to try as I didn't want to reset my settings every update.

Marathon2422 · 10 May 2020, 21:51

i just got phone and messaging working, the screen that asks if you want 2g/3g .or 2g/3g/4g/ i left that alone ,did not set anything - checked the reseller/reseller- apn without changes and entered apn for internet/mms . and checked that. now it works" sometimes the signal strength meter is empty with a cross / or is completely full, but still works.
i usually get about a third strength reading
but it works now
i have not tried pics yet.

BH and # 13 on sdcard