UBports Robot Logo UBports Forum
    • 版面
    • 最新
    • 標籤
    • 熱門
    • 使用者
    • 群組
    • 搜尋
    • 註冊
    • 登入

    Sony Xperia X Performance (dora/F8131 & F8132)

    已排程 已置頂 已鎖定 已移動 Sony Xperia X Performance (F8131 & F8132)
    37 貼文 20 Posters 11.7k 瀏覽 10 Watching
    正在載入更多貼文
    • 從舊到新
    • 從新到舊
    • 最多點贊
      回覆
      • 在新貼文中回覆
      登入後回覆
      此主題已被刪除。只有擁有主題管理權限的使用者可以查看。
      • A 離線
        Andreas Pokorny @MaxSo216
        最後由 編輯

        @MaxSo216 I made some attempts with xz1. Fixed issues in the sony kernel. But besides that it is more different than expected. It shows multiple flash devices. It will be possible but will require more time, that I do not have right now.

        1 條回覆 最後回覆 回覆 引用 0
        • A 離線
          Andreas Pokorny @malditobastardo
          最後由 編輯

          @malditobastardo camera/video and loss of wifi configuration will be fixed through ubports rootfs updates. The former could be manually fixed by using gst-droid. The latter is a kernel issue that makes temporary mac address changes of the wifi chip fail - but undetected by network manager. A newer version might fix that..

          1 條回覆 最後回覆 回覆 引用 0
          • ? 離線
            舊使用者 @kophamerla
            最後由 編輯

            @kophamerla said in Sony Xperia X Performance (dora/F8131 & F8132):

            Type "fastboot devices" and your phone should appear in the list.

            Hello, and what to do in case I type "fastboot devices" and my phone does not appear?
            Thanks for your suggestion.
            Br.
            T.

            A 1 條回覆 最後回覆 回覆 引用 0
            • A 離線
              Andreas Pokorny @jdavid_t
              最後由 編輯

              @jdavid_t said in Sony Xperia X Performance (dora/F8131 & F8132):

              updates

              What channel are you using?

              $ system-image-cli --info

              J 1 條回覆 最後回覆 回覆 引用 0
              • A 離線
                Andreas Pokorny @訪客
                最後由 編輯

                @Tellina Depends on what state your phone is in - when you do "fastboot devices" the blue led has to glow, otherwise it is not in fastboot mode, or the USB cable has issues, or the USB hub in your system has issues.

                1 條回覆 最後回覆 回覆 引用 0
                • A 離線
                  Andreas Pokorny @kugiigi
                  最後由 編輯

                  @kugiigi I was supposed to grab three suzu devices and accidently bought doras - so I had to adapt the port. Overall it is still not as polished, and it does not feel faster - yet. There is still something odd. Moving to arm64 made it snappier and removing the disfunct thermanager also helped. Still battery usage and overall performance should be better.

                  A 1 條回覆 最後回覆 回覆 引用 0
                  • J 離線
                    jdavid_t @Andreas Pokorny
                    最後由 編輯

                    @Andreas-Pokorny Hello Andreas. Thanks for your reply. I checked the output of the "system-image-cli --info" and it shows that I'm on the:

                    • current build number: 53
                    • channel: 16.04/community/anpok/devel

                    I've read that there are now other channels, and that I should move to the arm64 branch. I will reinstall the OS using the installer.

                    1 條回覆 最後回覆 回覆 引用 0
                    • A 離線
                      alexmigf @Andreas Pokorny
                      最後由 編輯

                      @Andreas-Pokorny The previous version bugs still persist on OTA-13, plus camera not working now, any idea how to fix those?

                      1 條回覆 最後回覆 回覆 引用 0
                      • A 離線
                        alexmigf
                        最後由 編輯

                        Bugs i found until now:

                        • No GPS detection

                        • Wi-fi disconnects randomly (and sometimes is hard to reconnect, keeps asking for password) - New

                        • When reboot wi-fi connection is lost, need to add password again

                        • Camera doesn't work (photo and video)

                        1 條回覆 最後回覆 回覆 引用 0
                        • P 離線
                          paulmbcufc @kophamerla
                          最後由 編輯

                          @kophamerla @Andreas-Pokorny

                          I was having major issues. No instructions on here did the job. I am a total newbie, never flashed a phone or used Linux in my life. I expected, the F8131 I bought would just plug into UBPorts and self install - it did not. So for anyone else stuck with this phone - this is the solution:

                          @kophamerla @Andreas-Pokorny I used bits from you guys and then some tweeks from myself to come up with this solution:

                          SUCCESS !! This is solution for anyone else, using Windows 10

                          Get ABD drivers
                          Unlock Bootloader
                          Allow USB debugging
                          Use Sony 'Emma' tool to get Latest software & Firmware available on there - (bottom 2 on list) You need to put phone in flash mode to be seen. (Hold volume down whilst connecting USB to PC)
                          Put phone in Fastboot (hold down volume up whilst connecting USB to PC)
                          Go to device manager - check that Android device is showing with ABD device - if not look at other devices for an S1 fastboot device with a warning symbol showing no driver. Update driver - select from computer and put driver location. If this doesn't make the device from other device to Android device, then get ABD from google and use that one.

                          Get TWRP, twrp-3.4.0-0-dora.img open command prompt in that folder. Type: fastboot flash boot twrp-3.4.0-0-dora.img

                          Boot up phone, will be in TWRP. Select Wipe, then format data - type yes. Back to advanced wipe - select DATA, CACHE & SYSTEM and wipe them.

                          Then use UBPorts installer. Put phone into Fastboot, and leave connected to computer until end of process. Manually tell it F8131 as device. Leave fastboot checked, I used channel marked 'stable', I think. Continue on. Phone will boot into UBPorts recovery, and will then install Ubuntu. It will reboot, you'll see Ubuntu robot and 'installing update' phone will then reboot BUT will be stuck on SONY boot splash screen. So hold down power and volume up, releasing power when screen goes black, until blue LED is on - which means its back in fastboot mode.

                          Then Flash the OEM binaries from: https://developer.sony.com/file/download/software-binaries-for-aosp-nougat-android-7-1-kernel-4-4-tone/ using fastboot flash oem SW_binaries_for_Xperia_AOSP_N_MR1_5.7_r1_v08_tone.img

                          Do this by opening a command prompt, again, within the folder. When its done reboot phone. This time SONY screen will make way for UBUNTU TOUCH.......YAY!!!!!

                          AppLeeA 1 條回覆 最後回覆 回覆 引用 1
                          • AppLeeA 離線
                            AppLee @paulmbcufc
                            最後由 編輯

                            @paulmbcufc
                            Thanks for sharing your findings.
                            I'm glad you managed to get UT on your phone

                            1 條回覆 最後回覆 回覆 引用 0
                            • J 離線
                              jlabon
                              最後由 編輯

                              Installed successfully UT on my F8131 device following above instructions (--> thanks for enabling UT on Sony Xperia X Performance).

                              However, some functionalities or features are missing which would make the phone ready for daily usage.
                              Missing feature or no functionality:

                              • Missing feature of Fingerprint sensor
                              • GPS/Position doesn't work at all
                              • Camera photo flash-light not working, photo zoom not working, film recording not working (but simple photo works)
                              • Bluetooth doesn't connect to other devices (e.g. communication systems) and often is disconnecting after a few seconds. And sometimes it cannot be restarted until device is rebooted.
                              • USB-MTP doesn't allow file management from Windows/Ubuntu file management system/explorer (e.g. transfer files to phone, moving files on phone storage to another place on the phone deletes the file, etc). But file system/structure can be accessed for reading files.
                              • No ring-tone when receiving a call. Just vibration is working.
                              • Wifi password needs to be re-entered after re-boot of the phone.

                              Hope that issues will be solved with daily updates on devel-channel.
                              Or is there a tweak or trick in place to solve (some of the) issues?
                              (If there is, could you share it?)

                              J 3 條回覆 最後回覆 回覆 引用 0
                              • J 離線
                                jlabon @jlabon
                                最後由 編輯

                                P.S.: Also NFC is not working.

                                1 條回覆 最後回覆 回覆 引用 0
                                • J 離線
                                  jlabon @jlabon
                                  最後由 編輯

                                  Update:
                                  Now, with the new update (build 112) Bluetooth connection works with communication systems and calls are working in general.
                                  But on car communication system contacts/telephone book is not downloaded and is not possible to use. Also forcing downloads of contacts doesn't work (car communicaton system shows that no contacts are found).

                                  1 條回覆 最後回覆 回覆 引用 0
                                  • J 離線
                                    jlabon @jlabon
                                    最後由 編輯

                                    2nd Update:
                                    Now (with last update build 115) GPS/Position seems to work, that's great. But satelite recognition needs some time (ca. 20 sec - 2 min).

                                    stanwoodS 1 條回覆 最後回覆 回覆 引用 0
                                    • stanwoodS 線上
                                      stanwood @jlabon
                                      最後由 編輯

                                      @jlabon GPS signal acquisition is quite long in general since UT doesn't support A-GPS, Glonass nor Galileo yet. Duration varies according to devices. I noticed that it's quite quick on the Vollaphone (> 1 min) and much longer on Nexus 5 (3 to 5 minutes at least).

                                      Redmi Note 9S Stable
                                      If God has a computer, it must be a GNU/Linux

                                      1 條回覆 最後回覆 回覆 引用 0
                                      • LakotaubpL 離線
                                        Lakotaubp
                                        最後由 編輯

                                        Please post all further discussion here https://forums.ubports.com/category/81/sony-xperia-x-performance-f8131-f8132 Thank you.

                                        1 條回覆 最後回覆 回覆 引用 0
                                        • KenedaK Keneda moved this topic from Devices on
                                        • 第一個貼文
                                          最後的貼文