Oneplus One installation failure
-
@cliffcoggin No that's not what they meant. OEM unlock is something that needs to be done for the installer to work. First thing just start the phone as normal and make sure you fully charge it. Then we can sort the rest for you. I am guessing you have adb and fastboot installed on your Mint OS.
-
Please explain OEM unlock.
The phone is charged and turned on.
I don't know about adb and fastboot but those commands in a terminal gave this:Android Debug Bridge version 1.0.39 Version 1:8.1.0+r23-5~18.04 Installed as /usr/lib/android-sdk/platform-tools/adb global options: -a listen on all network interfaces, not just localhost -d use USB device (error if multiple devices connected) -e use TCP/IP device (error if multiple TCP/IP devices available) -s SERIAL use device with given serial (overrides $ANDROID_SERIAL) -t ID use device with given transport id -H name of adb server host [default=localhost] -P port of adb server [default=5037] -L SOCKET listen on given socket for adb server [default=tcp:localhost:5037] general commands: devices [-l] list connected devices (-l for long output) help show this help message version show version num networking: connect HOST[:PORT] connect to a device via TCP/IP [default port=5555] disconnect [HOST[:PORT]] disconnect from given TCP/IP device [default port=5555], or all forward --list list all forward socket connections forward [--no-rebind] LOCAL REMOTE forward socket connection using: tcp:<port> (<local> may be "tcp:0" to pick any open port) localabstract:<unix domain socket name> localreserved:<unix domain socket name> localfilesystem:<unix domain socket name> dev:<character device name> jdwp:<process pid> (remote only) forward --remove LOCAL remove specific forward socket connection forward --remove-all remove all forward socket connections ppp TTY [PARAMETER...] run PPP over USB reverse --list list all reverse socket connections from device reverse [--no-rebind] REMOTE LOCAL reverse socket connection using: tcp:<port> (<remote> may be "tcp:0" to pick any open port) localabstract:<unix domain socket name> localreserved:<unix domain socket name> localfilesystem:<unix domain socket name> reverse --remove REMOTE remove specific reverse socket connection reverse --remove-all remove all reverse socket connections from device file transfer: push [--sync] LOCAL... REMOTE copy local files/directories to device --sync: only push files that are newer on the host than the device pull [-a] REMOTE... LOCAL copy files/dirs from device -a: preserve file timestamp and mode sync [system|vendor|oem|data|all] sync a local build from $ANDROID_PRODUCT_OUT to the device (default all) -l: list but don't copy shell: shell [-e ESCAPE] [-n] [-Tt] [-x] [COMMAND...] run remote shell command (interactive shell if no command given) -e: choose escape character, or "none"; default '~' -n: don't read from stdin -T: disable PTY allocation -t: force PTY allocation -x: disable remote exit codes and stdout/stderr separation emu COMMAND run emulator console command app installation: install [-lrtsdg] PACKAGE install-multiple [-lrtsdpg] PACKAGE... push package(s) to the device and install them -l: forward lock application -r: replace existing application -t: allow test packages -s: install application on sdcard -d: allow version code downgrade (debuggable packages only) -p: partial application install (install-multiple only) -g: grant all runtime permissions uninstall [-k] PACKAGE remove this app package from the device '-k': keep the data and cache directories backup/restore: to show usage run "adb shell bu help" debugging: bugreport [PATH] write bugreport to given PATH [default=bugreport.zip]; if PATH is a directory, the bug report is saved in that directory. devices that don't support zipped bug reports output to stdout. jdwp list pids of processes hosting a JDWP transport logcat show device log (logcat --help for more) security: disable-verity disable dm-verity checking on userdebug builds enable-verity re-enable dm-verity checking on userdebug builds keygen FILE generate adb public/private key; private key stored in FILE, public key stored in FILE.pub (existing files overwritten) scripting: wait-for[-TRANSPORT]-STATE wait for device to be in the given state State: device, recovery, sideload, or bootloader Transport: usb, local, or any [default=any] get-state print offline | bootloader | device get-serialno print <serial-number> get-devpath print <device-path> remount remount /system, /vendor, and /oem partitions read-write reboot [bootloader|recovery|sideload|sideload-auto-reboot] reboot the device; defaults to booting system image but supports bootloader and recovery too. sideload reboots into recovery and automatically starts sideload mode, sideload-auto-reboot is the same but reboots after sideloading. sideload OTAPACKAGE sideload the given full OTA package root restart adbd with root permissions unroot restart adbd without root permissions usb restart adb server listening on USB tcpip PORT restart adb server listening on TCP on PORT internal debugging: start-server ensure that there is a server running kill-server kill the server if it is running reconnect kick connection from host side to force reconnect reconnect device kick connection from device side to force reconnect reconnect offline reset offline/unauthorized devices to force reconnect environment variables: $ADB_TRACE comma-separated list of debug info to log: all,adb,sockets,packets,rwx,usb,sync,sysdeps,transport,jdwp $ADB_VENDOR_KEYS colon-separated list of keys (files or directories) $ANDROID_SERIAL serial number to connect to (see -s) $ANDROID_LOG_TAGS tags to be used by logcat (see logcat --help) cliffcoggin@Cliffscomputer ~ $ fastboot fastboot: usage: no command -
@cliffcoggin In a terminal type
adb reboot bootloader
wait for the phone to restart then type
Sudo fastboot oem unlock
When finished you can type
fastboot devices
and your device should be listed
restart the phone normally and try the installer again.
-
The first command did nothing to the phone and gave me this
code_text ```cliffcoggin@Cliffscomputer ~ $ adb reboot bootloader * daemon not running; starting now at tcp:5037 * daemon started successfully error: no devices/emulators found -
Try to unset and set developer mode
Be sure you enabled USB-debugging in developer option
then connect your phone with USB cable it should ask you for permissions.
If it ask confirm and on PC in terminal type "adb devices". -
I unset and then set Developer Option, enabled debugging, and plugged in the cable. Still no response from the phone except for the charging light.
-
It's late here. I'll return tomorrow to see if anybody has further ideas.
-
@cliffcoggin Try an other USB cable.
-
The first thing you need to sort is the connection between your phone and pc. Try a few cables and just see if having the phone in file transfer/MTP mode gets that connection up.
Once thats done you can move to the adb connection. Just keep an eye out for the grant permission box on the device. -
I have a new cable arriving later today. Initially the old cable was working and the computer detected the phone as A0001, but later attempts told me there was no connection.
-
@Lakotaubp
The new cable connects the phone to the computer. A0001 is mounted.adb reboot bootloadercaused the phone to go into fastboot mode rather than restart.
sudo fastboot oem unlockplus password gave me OKAY finished in 0.023s.
fastbboot devicescaused the phone to factory reset.
Where do I go from here please?
PS. Should "ADB over network" be enabled? -
@cliffcoggin You do need to grant permission for the connection between pc and device that's all. I would just type in a terminal as a check
adb devices
Then run the installer if your device is shown that is
-
It doesn't show the phone.
List of devices attached df32588a unauthorizedHow do I authorise it?
-
I give up. I have tried every combination of instructions I can find, including the terminal command mentioned elsewhere on the forum. I'll get rid of it and stick with my dumb flip phone.
-
@cliffcoggin said in Oneplus One installation failure:
It doesn't show the phone.
List of devices attached df32588a unauthorizedHow do I authorise it?
Enable developper mode i guess...
EDIT :
@Lakotaubp said in Oneplus One installation failure:
@cliffcoggin There should be a popup window asking you to accept the connection. Pretty sure it's on the phone when you connect. Can't remember how long it remains visable.
Or that more probably...
-
@cliffcoggin There should be a popup window asking you to accept the connection. Pretty sure it's on the phone when you connect. Can't remember how long it remains visable.
-
Just did quick web search so you might want to try others but, with the device connected revoke usb debugging (switch it off or whatever) in Dev options then type in a terminal
adb kill-server
adb start-serverYou should get asked to accept the connection. If you do then check with
adb devices
If not have a look on the web.
-
@Lakotaubp said in Oneplus One installation failure:
adb kill-server
Thanks. There was no request to accept connection.
The adb kill-server command gave meadb kill-server cannot connect to daemon at tcp:5037: Connection refused -
@cliffcoggin Did you go through all the steps ?
- unplug device
- adb kill-server
- adb start-server
- plug device
Allow USB debugging in your device when popup
-
If that doesn't fix it would removing adb, updating the system and reinstalling adb fastboot work?
Edit: Or try another pc beginning to think it might be a Mint issue. Seem to remember using ubuntu sometimes instead.
