Oneplus One failed
-
@w0lf3n Did you first run
adb reboot bootloader
Then if the device lock state is locked, run
sudo fastboot oem unlock
-
@Lakotaubp said in Oneplus One failed:
@w0lf3n Did you first run
adb reboot bootloader
Then if the device lock state is locked, run
sudo fastboot oem unlock
Yes, I did.
On the phone, the USB tethering is not working, it won't switch on. I don't know if that is causing the problem?
-
@w0lf3n Installed UT by the installer on OPO always gave me problems, but never on the command line.
If you can't do it through the installer, I suggest you to try this simple procedure:-
put the OPO in fastboot mode;
-
Plug the OPO into the laptop;
-
Run the command line under the terminal (copy and paste the following)
sudo ubuntu-device-flash --server=https//system-image.ubports.com touch --device=bacon --channel=ubports-touch/16.04/stable --bootstrap --wipe
Let the procedure go until UT is installed on the OPO, this should take some time.
-
-
@w0lf3n When booted back into the existing os does the phone work ok. When connected to your pc/laptop and the screen unlocked it should show as 'android device' in your file system and you should be able to access the OPOs file system. You need MTP mode for that.
-
Phone works OK in original OS but computer doesn't recognise the phone. Tethering won't work.
-
@w0lf3n If you are trying with the USB tethering option, that is not the option you want. You need File transfer option, can't remember if that isexactly what it is called or not but not usb tethering.
-
@Lakotaubp said in Oneplus One failed:
@w0lf3n If you are trying with the USB tethering option, that is not the option you want. You need File transfer option, can't remember if that isexactly what it is called or not but not usb tethering.
I'm selecting mtp file transfer but nothing is happening.
-
@w0lf3n Now you have that option retry typing (with the phone in normal mode)
adb devices
in a terminal. What do you get.
-
@Lakotaubp said in Oneplus One failed:
@w0lf3n Now you have that option retry typing (with the phone in normal mode)
adb devices
in a terminal. What do you get.
List of devices attached
- daemon not running. Starting it now on port 5037*
- daemon stared successfully *
-
I'm relying on the Snap version of the installer on the laptop but maybe it's not vital BUT :
I suggest you to try things IN THIS ORDER in your LInux Laptop IF this has not been the case :
- DON'T START THE INSTALLER RIGHT AWAY...
- put your phone in developer mode (I think you've already done it);
- plugging in the phone;
- type adb devices in terminal : your phone should be listed and detected (i hope !).
- NOW, LAUNCH THE INSTALLER and follow the installation procedure.
And if it's doesn't work, you can always try the command line procedure i gave you.
Good luck !
-
Tried both methods and neither work.
My phone doesn't show in terminal. -
@w0lf3n The cable could be at fault here too. Based on your comments this is completely unrelated to the UBports installer but you'd find the same problems trying to install any Android ROM too.
So, the questions are:
- Can you use the cable simply to transfer files to/from a phone? Does it work and does the transfer succeed?
- Can you try a different USB cable? Some have issues with this - usually the longer cable the worse it can get.
-
No, the computer is not recognising the phone and I have tried 3 USB cables so far.
-
@w0lf3n This is really weird. Maybe some issue with the phone hardware itself then :(.
-
@zubozrout said in Oneplus One failed:
@w0lf3n This is really weird. Maybe some issue with the phone hardware itself then :(.
Your probably right.
Oh well, at least my useless pine phone will have some company in the back of the drawer
Thanks for the help, anyway
-
OK, so I tried a fourth USB cable and lo and behold it seems to have worked. The Ubports installer Is displaying Flashing firmware and the phone is in fastboot mode, however its been like that for 8 hours. How long does it normally take?
-
@w0lf3n A few mins. Restart everything and choose the wipe option (you have nothing on the phone to keep?).
-
Still nothing, I keep getting error messages and phone asking to be rebooted but goes back to original OS.
I will try again this evening whan I return from work.
-
@w0lf3n When you get back first try using the terminal
adb devices (should show device)
Then
adb reboot bootloader
fastboot devices (should show device)Then try again.
-
@w0lf3n I saw a case recently (last week) for installation in a OnePlueOne with similar symptoms as yours.
We solved it going back to an old version of the installer which was the one I used to install in my OnePlusOne. It is this one:
https://github.com/ubports/ubports-installer/releases/tag/0.2.6-beta
This version saw the device immediately and completed the installation without a glitch.
