Some Confusion about the install requirements
-
Hey everyone!
I just got my Redmi Note 9 Pro delivered today and I'm planning on installing Ubuntu Touch on it.
I have already started the bootloader unlock process, but I'm not quite sure how to proceed after that.The device page: https://devices.ubuntu-touch.io/device/joyeuse/ states:
Please double-check that your device is running the latest available stock Android 10 firmware.
And gives this link: https://xmfirmwareupdater.com/supported/firmware/
If I understand it right, this is the download link to just the firmware.
The file size is ~ 78 MB for the latest Android 10 version: https://xmfirmwareupdater.com/firmware/joyeuse/stable/V12.0.4.0.QJZEUXM/So here is the question:
- Do I really just use this file and downgrade the firmware? If so, how?
- Or should I use the "normal" downgrade process and use the whole Android 10 + MIUI 12 fastboot archive (~4.6 GB) and MiFlash Tool to downgrade the whole phone?
- Or is it both? I'm not quite sure if the firmware is even included in the Android / MIUI package
Thanks in advance for any clarification
-
@GosuSan Maybe this step by step tutorial may help you?
https://forums.ubports.com/topic/9957/installation-guide-redmi-note-9s
This one's specific for Curtana (9S) version, but the process is very similar.
-
@stanwood it does, thanks! The guide you posted uses the full image, and that's what I assumed I have to use.
Maybe the link in the device page should point to those images then. To avoid confusion. -
@GosuSan If there is no Android 10 version for your device, you must install it first. Only then can you install Ubuntu Touch. It's not easy but it can be done. I have a Redmi Note 9 Pro and have already tried UT several times.
-
@Enrico13011978 I'm not sure what exactly you are saying. There is a Android 10 version for the phone, but a newer version is currently installed. So I have to downgrade, I know that.
I was just confused what type of image to use for the downgrade. But reading the guide linked above, it's just the "normal" downgrade path for Xiaomi phones.
-
@GosuSan Just do it and don't always rely on the instructions. Xiaomi still has Android 10, which is mandatory for Ubuntu Touch. By the way, you are right, you should link the right version for each device. I have already reported what was somehow done but now you have to search for it yourself. I haven't seen the porter since the beginning of the year here probably a lot of work or not.
-
The guide state to check the firmware version.
So the link is to the firmware.It does not state one should flash it manually, except if you know what you're doing.
The general rule is to install whatever version of Android is required for a given device.
How to install Android or a particular version of Android is not something UBports wants to be accountable for.
There is a plethora of guides on how to mess with android available online...The first steps to install Ubuntu Touch are not something we have direct control over.
So unlocking the bootloader and getting sure that one have the proper version of Android will remain the user's responsibility.
Just follow the porter's instruction as to what version should be present before running the UBports installer. -
@GosuSan
For downgrading you have to use full image, the one that is 4.6GB, because downgrading is equivalent to a full system reinstall.
Incremental update (the one that is ~80MB) is not appropriated for this purpose. -
@GosuSan Good! Then we hope everything will (as it should) finally go fine.
I've already asked in a previous Q&A session if UBports installer could directly load et flash the appropriate firmware/ROM in the process, but as Applee well explained, there are legal and copyright reasons that are far beyond our control that prevent us to do that.
Thanks beforehand to let us know how your install did succeed
-
@GosuSan i have the same device you will actually need 12.02 as the final version will work but for some reason screen rotation is broken i dont know why you should just be able to use the installer but if you cannot you will need to use fastboot command from the terminal and you will have to fasboot flash <partition> filename.img to each file the partiton names are the same as the filenames
-
Well cheers meal if I had not written in a group that the entire servers of Xiaomi firmware got new links.you wouldn't need any firmware at all. That means you could also leave Android 11 on it and just have no telephony. The best firmware is 12.0.2.0 Global or EEA. Or even Lineage Os 17.1 works with the porter of the devices probably changes from time to time. The fact is that if Ubports don't want to have anything to do with Android etc., the user has to expect accidents in advance. In any case, I don't think your attitude is that good. I know exactly what quirks the UT installation sometimes brings with it. It starts with the recovery, where an error has crept in. You have to recreate the portions, which may have to be flashed three times. It would really be an advantage to be able to get and install Android (Los17.1) via installer. Drodidan can also be fetched this way.
-
@Keneda Personally, I will do a UT installation tomorrow with the new Devel 24.04 with original Android and Lineage Os 17.1. My device is Joyeuse and I may share the results as I also want to test something with the VoLte history. It may be that I stay with UT for the time being to help a little. Because without trying it yourself you are lost anyway. As a new customer, I wouldn't want to keep loading up to 5 GB. There are also other firmware for TWRP you have to search for everything. That's the big annoying thing with Xiaomi. It doesn't get any better with the latest Hyper Os!!!
-
Now I have even found a Russian global version 12.0.5.0. I am testing this one and it should work. If I give Tobiyio or whoever is maintaining the device page the link with the request to set this for Joyeuse. Sorry but the Porter is not 100 reliable in this regard. He has only tested 12.0.2.0 and 12.0.1.0. These are all very minimal deviations. The main problem back then was the blocked telephony in some versions, including 12.0.4.0.
-
JFI really on how things work https://ubports.com/blog/ubports-news-1/post/devices-webpage-update-3914
-
This post is deleted! -
@Enrico13011978 No need to be rude nor use dirty words here.
Some other smartphones companies including Nokia and Huawei just even not allow to unlock their bootloader. But that doesn't mean we can afford to criticise them here.
Anyway, the advised Fastboot ROM to first install on this device is V12.0.3.0
-
@stanwood I will look very carefully in future before I ever buy Chinese smartphones again. Whether the manufacturers release the bootloader is up to them. But I won't buy anything like that anymore. That has nothing to do with me being rude, it's just the way it is. And you can believe me, I've spent hours with the firmware versions, but that's enough.
-
Moderator's note:
One comment removed in order to comply with the UBports Code of Conduct. Profanity and name calling are not condoned here, please take note of that. You can express your opinion, in so far as it's relevant here, without those things. -
@Moem I have taken note of that. I'm definitely not going to write anything more about Xiaomi smartphones because I'm done. But what is relevant is that Xiaomi likes to release firmware versions twice. Be careful, even for Android 11 there is version 12.0.2.0 or 12.0.3.0 if you don't pay attention, the wrong stuff is on it.
-
@Enrico13011978 said in Some Confusion about the install requirements:
I'm definitely not going to write anything more about Xiaomi smartphones because I'm done.
You can write whatever you want on any company, just stay in code of conduct selecting words to say it.
