failed to install ubport on my bq m10 hd
-
@advocatux This link is dead https://spflashtool.com/download/SP_Flash_Flash_Tool_v5.1744_Linux.zip>`_.
and this version doesn't sart https://spflashtool.com/download/SP_Flash_Tool_exe_Linux_64Bit_v5.1520.00.100.zip
I don't see other versions for linux ....
-
@shargar these links are working for me now
Edit: this is what you have to download, be careful because there are other links for downloading but only if you're using Ubuntu 17.10 !!
-
ok , i folowed english instruction to be sure... ( https://docs.ubports.com/en/latest/userguide/install.html )
I press download in splash, i connect my device ( turn off) and i 've this message :
BROM ERROR : S_COM_PORT_OPEN_FAIL (1013)
[COM] Failed to open COM port.
[HINT]:I try with my different usb port without sucess...
The splash version is SP_Flash_Tool_exe_Linux_v5.1612.00.100
the
scatter loading file is MT 8163_Android_scatter.txt -
@shargar do you have your tablet in developer mode and usb debugging allowed?
Have you tried a different usb cable?
Edit: check you have OEM unlocking on too
Edit 2: Oh, I'm remembering now. Do you havemodemmanager
installed on your Ubuntu? IIRC you need to remove it because is incompatible with SP Flash Tool
Edit 3: Hmm here (https://www.dedoimedo.com/computers/aquaris-m10-with-android.html) it says you can avoid that error running the tool withsudo
-
@shargar
The BroM error is usually, a usb driver problem.
i have the fhd model,
in terminal i run
/ sudo fastboot devices/
then start
/ ubports-installer /
and run the installer.
i looked on "BQ support and could not find ubuntu for hd model,here is the link for FHD model ,it may help you search.http://www.mibqyyo.com/en-download/categorias/aquaris-m10-fhd-ubuntu-edition/
-
@advocatux. Yes, my tablet is in developer mode, usb debuging, and OEM unlocking.
My cable is ok, i see it with "sudo adb device".
To run the tool, I double click on it. I don't understand how to run it with sudo ? "sudo flash_tool" in a terminal ? -
@shargar The link below is nothing to do with Ubports but will as @advocatux has said show you how to remove the modemanager quicker and better than I can type the instructions
http://www.mibqyyo.com/en-articles/2015/09/16/ubuntu-android-installation-process-for-bq-aquaris-e4-5-and-e5/#/vanilla/discussion/embed/?vanilla_discussion_id=0
Its near the top from point 3 down. If you have modemanager it will not work as far as I know.
Hope this helps all the best. -
Hi ! It's ok for me. I did it. I try to explain with my magic english. So, in my case, the problem was I started the flash_tool without sudo. I went to the tool's files and I wrote sudo ./flash_tool and let's go
Before I tried with modemmanager remove without sucess...
For french peoples : Attention l'outils flash_tool doit être lancé avec la commande sudo ./flash_tool dans un terminal. Avant, bien se place rdans le bon dossier avec la commande cd -
Thanks to Advocatux, Lakotaubp and Marathon for your help.
Take care -
@shargar Concratulations on your UBports Ubuntu Touch M10. Have a look here for some more usfull info
https://ubports.com/telegram-welcome -
@shargar Kudos! Enjoy your new UT device
@Lakotaubp that sentence is a fine example of «magic English» hahaha
-
@advocatux I have absolutely no idea what you may or may not be referring to at all : ) !! Whatsoever