Dekko2 Developer Community Thread

hummlbach · 1 Nov 2018, 04:49

Yes, thats really bad... not to say, as for you now, a show stopper... Definitely high prio on our list, immediately after getting rid of the dependency to oxcide... Unfortunately I'm not aware of any workaround and I don't think there is one... Right @doniks @delijati?

doniks · 1 Nov 2018, 04:49

@hummlbach said in Dekko2 Developer Community Thread:

Right?

right!

guru · 3 Nov 2018, 19:48

I have with Dekko2 from the latest OTA-5 on BQ E4.5 the following problem with one (only one) of my three IMAP+SMTP accounts: When I remove any mail (sliding right and marking the red button) the mail does not go away. The enabled log in this case shows:

[2971] Nov 03 20:07:24 [Debug] Running action ExportUpdatesRequest 66743791779844
[2971] Nov 03 20:07:24 [Debug] Messaging :  Setting imap strategy 25ImapExportUpdatesStrategy
[2971] Nov 03 20:07:24 [Debug] IMAP :  "3" About to open connection "w51246_1-guru" "imap.1blu.de"
[2971] Nov 03 20:07:24 [Debug] Messaging :  QMailTransport::Socket::Socket SET PROXY host= "" port= 0
[2971] Nov 03 20:07:24 [Debug] Messaging :  Opening connection -  "imap.1blu.de" : 143  TLS
[2971] Nov 03 20:07:24 [Debug] Messaging :  IMAP : connection established
[2971] Nov 03 20:07:24 [Debug] IMAP :  "3" RECV: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN] Dovecot ready.
[2971] Nov 03 20:07:24 [Debug] IMAP :  "3" SEND a001 CAPABILITY
[2971] Nov 03 20:07:24 [Debug] IMAP :  "3" RECV: * CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN
[2971] Nov 03 20:07:24 [Debug] IMAP :  "3" RECV: a001 OK Pre-login capabilities listed, post-login capabilities have more.
[2971] Nov 03 20:07:24 [Debug] IMAP :  "3" SEND a002 STARTTLS
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" RECV: a002 OK Begin TLS negotiation now.
[2971] Nov 03 20:07:25 [Debug] Messaging :  IMAP : Secure connection established
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" SEND a003 CAPABILITY
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" RECV: * CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" RECV: a003 OK Pre-login capabilities listed, post-login capabilities have more.
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" SEND a004 LOGIN w51246_1-guru <password hidden>
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" RECV: * CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS BINARY MOVE
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" RECV: a004 OK Logged in
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" SEND a005 ENABLE QRESYNC CONDSTORE
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" RECV: * ENABLED QRESYNC CONDSTORE
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" RECV: a005 OK Enabled (0.000 + 0.000 secs).
[2971] Nov 03 20:07:25 [Warning] Unable to process malformed message removal record for account 5
[2971] Nov 03 20:07:25 [Debug] Action completed 66743791779844 result success

Any ideas?

joachimvda · 11 Nov 2018, 15:00

I seem to be unable to get dekko2 setup on my Fairphone with 16.04. Looking at the logs it says Dekko/Mail/Stores/accounts/AccountSetup.qml:105 Error: Insufficient Arguments.
What am I doing wrong?

domubpkm · 11 Nov 2018, 15:50

@hummlbach Copy works 'at half' with morph-browser that is to say we can only copy blocs right now. We can't copy what's we want (i know you don't work on this issue). Hard issue i saw.

Copy / Paste don't work at all with dekko 2 Xenial whereas it worked with dekko 2 Vivid. Very annoying to well use dekko 2 indeed.

Stefano · 11 Nov 2018, 19:12

@joachimvda Have you uninstalled the previous version of Dekko and deleted all the files? Have a look in .cache, .config and .local/share and delete all files dekko2.dekkan, dekko2.dekkoproject
Reboot and reinstall Dekko, set up the mail account again, it should work.

guru · 11 Nov 2018, 20:32

If an installation of Dekko2 somehow needs a cleaned environment, it should remove or rename old content to bring it out of the way.

doniks · 11 Nov 2018, 20:52

@guru you are right that it should. that doesn't necessarily mean that it successfully does so in all cases

hummlbach · 11 Nov 2018, 21:11

@domubpkm just checked that: Copy and paste works when reading messages but not in the editor. Both on xenial as well as on vivid... I don't think it has been different at anytime, so this is no regression, but nonetheless the less annoying and definitely high prio. (maybe it will take some time (2-3 months) until you see progress on dekko again, since the new telegram client is happening atm)

domubpkm · 11 Nov 2018, 21:58

@hummlbach Thanks for your answer.

For the copy/paste you are right : i must do a mix with 'dekko 1' vivid in which copy/paste worked fully.

You say : maybe it will take some time (2-3 months) until you see progress on dekko again... : it's an interesting information for every dekko user.

tomoqv · 4 Dec 2018, 10:04

Does anybody know how Dekko handles spam? For some reason I get a good amount of replies to my own e-mails caught in Dekko's spam folder. They seem to end up there instead of in the gmail spam or the spam handled by Thunderbird on my PC.

flaun*in · 7 Dec 2018, 16:32

I had problems to save an attached file via the file manager. When I select the file manager in the app list, the file manger opens as expected. But after pressing insert nothing happens. Can anybody confirm this?
Saving pdf's via the document viewer works perfectly!
thx

guru · 1 Feb 2019, 09:26

Is this thread still in use or has the Dekko2 discussion moved elsewhere?

I filed two new issues in the bug tracker:

https://gitlab.com/dekkoproject/dekko/issues/134
https://gitlab.com/dekkoproject/dekko/issues/135

guru · 21 Feb 2019, 08:38

This morning I deleted in my IMAP mbox a single mail. I was on the road, i.e. the connection by data mobile, and it seems that the mail was not purged on the server. It is still visible there using another MUA and it is also visible using the same Dekko2 on another OTA-7 device. The mail is not visible, even after restart of Dekko2 on the device from where I did the deletion. The only I can think of is that Dekko2 has a local database of deleted mails. Is this a bug or a feature.

Btw: Are there any other users of Dekko here?

hummlbach · 21 Feb 2019, 19:03

Yes me for example.
When we first published dekko 2 for 16.04 in the openstore, it was downloaded over 800 times within 3 days or so. And i guess most of the people knew what they were doing...

guru · 21 Feb 2019, 19:46

Well, I was asking for a use on a daily runner. Like I do. There is so less discussion traffic here in the forum.

Lakotaubp · 21 Feb 2019, 20:20

@guru Have just been trying this but on wifi. On UT devices it worked OK There was a bit of a delay with nexus 7 catching up with OPO restarting dekko help speed things up as well.
The biggest delay was gmail app on android that took 10 mins to catch up. Maybe your issue was just down to the mobile connection. Should be able to check on mobile data tomorrow.

hummlbach · 22 Feb 2019, 06:08

@guru I use it as my only mail application (ah rarely using mutt on the PC for searching for old mails) on my only phone and daily driver.

guru · 22 Feb 2019, 06:47

When I have my FreeBSD laptop or netbook (Acer C720) running, I use mutt, if not I use Dekko since 2015. I even ported mutt to my E4.5 running UT. This was lost when I moved to UBports, but I will definitely recompile it again in a chrooted env because Dekko2 is missing some essential features, for example 'view source' of the mail.

libremax · 22 Feb 2019, 10:07

@guru said :

Btw: Are there any other users of Dekko here?

I have been using dekko/dekko2 regularly for four years but only for reading emails.