Dekko2 Developer Community Thread

dR0W · 19 Sept 2018, 08:25

Thanks to all the developers involved in this project for the great work.
Tested on my BQ Aquaris E4.5

delijati · 20 Sept 2018, 23:39

Hi,
tried to debug an error i had with using Dekko2. So i compiled it (after some code changes) for amd and run into the Oxide not installed error.

So to sum it up as Oxide is going to be replaced by QtWebEngine this also needs to be done for Dekko2. Or is there a plan to add a transparent layer that redirects to qtwebengine?

Here the issues i created regarding that topic:

One other question is there a repo with the source of dekko1?

doniks · 21 Sept 2018, 05:25

Hi @delijati

Can you describe what you had to do to test on amd64? This is my attempt:
https://gitlab.com/dekkan/dekko/commit/8b3aa09c7ec7b9d10b957c2d1013afe3bf737ea8
If I remember it right, I could build it but wasn't able to run it.

Regarding oxide , yes at some point the rendering engine probably has to be replaced, but unless that becomes blocking, it has no priority at the moment.

What error with oxide do you get?

Wrt dekko1, dunno

advocatux · 21 Sept 2018, 07:19

@delijati have you checked older branches here https://gitlab.com/dekkoproject/dekko/tree/master?

delijati · 2 Oct 2018, 16:22

@doniks Hi i just found your branch. My changes seam to be almost the same. The error is that Oxide is missing for amd64.

[20180921 13:35:15.789 CEST [dekko.plugman.incubator] >> Comp failed:  "file:///opt/develop/privat/mobile/ubports/__dekko_build/debug/install-root/bin/plugins/ui/MainUI.qml:5 module \"com.canonical.Oxide\" is not installed\n"

I'm not sure how the plan for Oxide and amd64 looks like, is it hard to add it to the build chain for amd64, is there any plan to do it at all for xenial, bionic?

doniks · 2 Oct 2018, 16:22

@delijati said in Dekko2 Developer Community Thread:

@doniks Hi i just found your branch. My changes seam to be almost the same. The error is that Oxide is missing for amd64.
[20180921 13:35:15.789 CEST [dekko.plugman.incubator] >> Comp failed:  "file:///opt/develop/privat/mobile/ubports/__dekko_build/debug/install-root/bin/plugins/ui/MainUI.qml:5 module \"com.canonical.Oxide\" is not installed\n"

I've checked my branch again. It's not the exact same error that I got. Maybe there is still something we can learn from each other's changes. Can you push yours somewhere?

hummlbach · 3 Oct 2018, 09:22

Since there are popping up questions regarding email client from time to time, a short update on the state:
Actually we already had dekko 2 beta ready for upload to the openstore. But now we thinking of getting rid of oxcide first... @delijati already started working on this and has dekko 2 running prototypically without oxcide.
So expect dekko 2 to be in the openstore before/not after ota5 will be released.

Lakotaubp · 3 Oct 2018, 10:24

@hummlbach Great news great project and great work by one and all. Thank you for the time and effort.

doniks · 4 Oct 2018, 05:36

Tadaa

https://forums.ubports.com/topic/1750/dekko-0-1-6-beta2-released

Wanna test, praise, curse, suggest, wish? Absolutely, jump over to the other thread and fire away!

Lakotaubp · 4 Oct 2018, 05:41

@doniks on my way !!

matteo · 4 Oct 2018, 18:04

@lakotaubp Hey guys! Great job done on this email Client! I just installed it on my pro5 and it is working as I remember. But I still get an app crash every time I try to reply to an email (by hitting the arrow or the reply to all option, whilst the forward option seems to work).
I'm wondering whether you also noticed such an issue, since I didn't read any bug complain in this thread up to now.

Thank you!

Matteo

doniks · 4 Oct 2018, 18:29

@matteo said in Dekko2 Developer Community Thread:

@lakotaubp Hey guys! Great job done on this email Client! I just installed it on my pro5 and it is working as I remember. But I still get an app crash every time I try to reply to an email (by hitting the arrow or the reply to all option, whilst the forward option seems to work).
I'm wondering whether you also noticed such an issue, since I didn't read any bug complain in this thread up to now.

Standing on the shoulders of giants man Shoulders of giants!

Issues are tracked in the bugtracker not in this forum thread. This thread is to coordinate developers. You know, like, you have a patch, or you're stuck with compiling it, etc.

Let's hop over to the other thread: https://forums.ubports.com/topic/1750/dekko-0-1-6-beta2-released for general comments, feedback, testing. Over there you'll also find the link to the bugtracker. Please do raise an issue. Especially, if you have a stable reproduction!

doniks · 13 Oct 2018, 11:33

Any gitlab CI experts around? It seems that Dan has put something in place that still does ... something ... https://gitlab.com/dekkan/dekko/-/jobs but

a) I don't understand what makes it pass/fail ... why would the last job fail because "qbs not found" but the second last job succeeded? qbs is used in the build process and that hasn't changed
b) Can we make it create .click files that can be downloaded?

I guess the magic is triggered from here https://gitlab.com/dekkan/dekko/blob/master/.gitlab-ci.yml

Any advice?

guru · 26 Oct 2018, 06:45

I raised this in the Support Category and was asked to bring it up here:

When one deletes a mail in Dekko2 (0.1.6-beta2) from the list of the current mail folder, the list gets moved down to show a green Undo button for a few seconds, and then the list is moved up again, when this button goes away. The disadvantage of this down/up movement is, that sometimes you hit the wrong mail when selecting the next mail to read or to delete.

Is this configurable? If not a will file a bug issue.

hummlbach · 26 Oct 2018, 07:09

As far as i can see, its not configurable, so feel free to file a feature request.

guru · 26 Oct 2018, 07:29

https://gitlab.com/dekkan/dekko/issues/21

malditobastardo · 31 Oct 2018, 21:01

Hi guys. I just noticed that you cannot paste anything within dekko. i was just writing and email and because of this it was impossible for me to continue. is there any workaround or hotfix in the horizon? thank you so much in for all the hard work

hummlbach · 1 Nov 2018, 04:49

Yes, thats really bad... not to say, as for you now, a show stopper... Definitely high prio on our list, immediately after getting rid of the dependency to oxcide... Unfortunately I'm not aware of any workaround and I don't think there is one... Right @doniks @delijati?

doniks · 1 Nov 2018, 04:49

@hummlbach said in Dekko2 Developer Community Thread:

Right?

right!

guru · 3 Nov 2018, 19:48

I have with Dekko2 from the latest OTA-5 on BQ E4.5 the following problem with one (only one) of my three IMAP+SMTP accounts: When I remove any mail (sliding right and marking the red button) the mail does not go away. The enabled log in this case shows:

[2971] Nov 03 20:07:24 [Debug] Running action ExportUpdatesRequest 66743791779844
[2971] Nov 03 20:07:24 [Debug] Messaging :  Setting imap strategy 25ImapExportUpdatesStrategy
[2971] Nov 03 20:07:24 [Debug] IMAP :  "3" About to open connection "w51246_1-guru" "imap.1blu.de"
[2971] Nov 03 20:07:24 [Debug] Messaging :  QMailTransport::Socket::Socket SET PROXY host= "" port= 0
[2971] Nov 03 20:07:24 [Debug] Messaging :  Opening connection -  "imap.1blu.de" : 143  TLS
[2971] Nov 03 20:07:24 [Debug] Messaging :  IMAP : connection established
[2971] Nov 03 20:07:24 [Debug] IMAP :  "3" RECV: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN] Dovecot ready.
[2971] Nov 03 20:07:24 [Debug] IMAP :  "3" SEND a001 CAPABILITY
[2971] Nov 03 20:07:24 [Debug] IMAP :  "3" RECV: * CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN
[2971] Nov 03 20:07:24 [Debug] IMAP :  "3" RECV: a001 OK Pre-login capabilities listed, post-login capabilities have more.
[2971] Nov 03 20:07:24 [Debug] IMAP :  "3" SEND a002 STARTTLS
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" RECV: a002 OK Begin TLS negotiation now.
[2971] Nov 03 20:07:25 [Debug] Messaging :  IMAP : Secure connection established
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" SEND a003 CAPABILITY
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" RECV: * CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" RECV: a003 OK Pre-login capabilities listed, post-login capabilities have more.
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" SEND a004 LOGIN w51246_1-guru <password hidden>
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" RECV: * CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS BINARY MOVE
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" RECV: a004 OK Logged in
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" SEND a005 ENABLE QRESYNC CONDSTORE
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" RECV: * ENABLED QRESYNC CONDSTORE
[2971] Nov 03 20:07:25 [Debug] IMAP :  "3" RECV: a005 OK Enabled (0.000 + 0.000 secs).
[2971] Nov 03 20:07:25 [Warning] Unable to process malformed message removal record for account 5
[2971] Nov 03 20:07:25 [Debug] Action completed 66743791779844 result success

Any ideas?