@Flohack

~ # cat /proc/last_kmsg 
[    0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
[    0.000000] sec_tsp_mode: LCD_ID = 0x408047, val: 0X408047, ret1: 0x8
[    0.036590] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[    0.059722] msm_rpm_get_status(): Status id 433 not defined for target
[    0.059753] msm_rpm_get_status(): Status id 433 not defined for target
[    0.059783] msm_rpm_get_status(): Status id 433 not defined for target
[    0.059783] msm_rpm_get_status(): Status id 433 not defined for target
[    0.059814] msm_rpm_get_status(): Status id 433 not defined for target
[    0.059844] msm_rpm_get_status(): Status id 433 not defined for target
[    0.059844] msm_rpm_get_status(): Status id 433 not defined for target
[    0.059875] msm_rpm_get_status(): Status id 433 not defined for target
[    0.209259] sensor_power_on_vdd: done
[    0.263061] i2c i2c-4: Failed to register i2c client imx135 at 0x10 (-16)
[    0.263305] i2c i2c-4: Can't create device at 0x10
[    0.263763] i2c i2c-4: Failed to register i2c client s5k3l1yx at 0x34 (-16)
[    0.264007] i2c i2c-4: Can't create device at 0x34
[    0.298034] ion_heap_create: Invalid heap type 3
[    0.303222] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:3 report inf element:0x0
[    0.303436] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
[    0.304138] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:4 report inf element:0x400
[    0.304473] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
[    0.385742] Error-Bad Function Input
[    0.386718] Error-Bad Function Input
[    0.705566] smd_channel_probe_worker: allocation table not initialized
[    0.721649] dma_test_init, minor number 37
[    0.729095] mdm_modem_probe: registered mdm id 0
[    0.729248] mdm_do_first_power_on:id 0: Powering on modem for the first time
[    0.990509] cont_splash_clk_ctrl: dsi_esc_clk - clk_set_rate failed

Redmi 4x

Had to truncate due to false spam-detection

[    0.999847] [mdnie lite] start!
[    1.000061] [mdnie lite] end!
[    1.001800] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group df038608
[    1.002227] Inside writeback_driver_init
[    1.002471] Inside writeback_probe
[    1.006286] Unknown PM state 0
[    1.006378] Unknown PM state 3
[    1.192382] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
[    1.261932] msm_otg msm_otg: failed to get phy_clk
[    1.431884] couldn't get usb power supply
[    1.454223] [jc_spi_init:336] Entered
[    1.454315] [jc_spi_probe:301] Entered
[    1.454498] [jc_spi_probe:311] jc_spi successfully probed
[    1.454589] jc_config_isp_irq~~~~~~~~~~
[    1.454803] msm_eeprom_probe probe_fail
[    1.459228] msm_sensor_i2c_probe s5k6b2yx probe succeeded
[    1.459320] msm_eeprom_probe probe_fail
[    1.494873] mmc0: No card detect facilities available
[    1.620819] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[    1.621063] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[    1.639068] max77693_get_health_state: Fail to get psy (battery)
[    1.641784] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[    1.643585] max77693_get_health_state: Fail to get psy (battery)
[    1.646301] power_supply sec-charger: driver failed to report `power_now' property: 4294967274

g

@HYPER edge is still on xenial
https://devices.ubuntu-touch.io/device/santoni/

@hyper @Danct12 is the porting dev, hes the only one who could answer

Will 20.04 be ported to 4x?

@kornclown7 can I ask you what performance that unisoc has? Do you think it pairs with an i5, an i3 or worse?

@applee yes, but that raises another question.
If lomiri is ported to Ubuntu desktop edition, compiled for arm, we could have a standard Ubuntu on the pinephone that looks identical to UT ?
And click applications could be packaged for Ubuntu arm like we can already do when testing them using 'clickable desktop' ?

Or I still miss something?
I know that camera drivers suck on Ubuntu compared to android drivers.

I read that what distinguishes the pinephone from other android based phones, is that it can run a standard Linux kernel instead of the usual abstraction layer sitting on top of the android kernel and blobs.
Is that true for UT?
Is it like a standard Intel PC but with an arm cpu which can possibly be upgraded with a simple dist-upgrade?

@lakotaubp I'd go for 22.04 now...

Pictures are ok but when I try to record a video, the app freezes

I was thinking of automating the creation of clickable WebApps from scratch online games and apps through https://sheeptester.github.io/htmlifier/

@stanwood said in Disable anbox and hide its apps:

@suoko Hope it worked for you as well. If yes, I guess we could mark this thread as "Solved"

Gotta get used to forum rules again after the "telegram groups storm" of latest years