Feature request - it would be nice to have this to reduce the strain on my eyes at night

@totalrando Google Voice works on my P2XL.

We are working on a sip solution to stand in for VoLTE. We've had some good progress this week.

@Andrisk Sounds like it got stuck on the update. Try this https://forum.pine64.org/showthread.php?tid=10130

Verizon VoLTE will work (ONLY) with the Pinephone/pro

For everything else, as others have said, until VoLTE gets worked out T-mobile and associated MVNOs are best. I've used Mint, Red Pocket, US Mobile. All worked fine.

For Nexus 5 PolarCell.

I've put a lot of work into it, and other than doing the Nexus 5X battery mod, no battery works better.

@doniks Thanks for adding 64 bit support!

@jjconstr The Nexus 5 is a great phone, soon to be better with a halium upgrade. The main complaint about it is finding a good replacement battery. I've tried a couple and found the best battery is from a German company - PolarCell Battery for LG Google Nexus 5 D821 D820 BL-T9 EAC62078701 2450mAh. It is available on eBay if you are not in the EU.

It's a good quality after market - which means new, not old stock sitting on a shelf for half a decade, nor is it a cheap knock off rebranded. I've had it for a year now and still holds a full charge just like it used to when I bought the phone from Google.

Would it be possible to incorporate a Swype style keyboard action or hand writing recognition into Ubuntu Touch?

@GizmoChicken Pine64 forum says LTE with GPS optional if using EG25 module that is in the Pinephone - using the expansion board they have made.

I do hope they recommend the best place in the case to place the antennas.

Maybe some of these ideas will help?

https://bbs.archlinux.org/viewtopic.php?id=209121

https://aur.archlinux.org/packages/droidcam/

Apparently there is a group already working on a solution to access the camera from the android HAL and present it to Linux:

"provides a set of interfaces to libcamera for existing applications; they will include a V4L compatibility layer, an Android HAL interface, and a GStreamer interface. The intent is to make libcamera suitable for all Linux-based devices." https://lwn.net/Articles/794555/

https://libcamera.org/docs.html

@Zer0 Think you can help out with our T-Mobile/Metro OP N10 problem? OnePlus has been refusing to unlock N10s that have been bought from eBay. So we recommend the unlocked BE2026 version. But, the T-Mobile/Metro versions are a lot easier to find.

Please see the N10 section of the forum, or join us on Telegram in the N10 or NA Issues channels.

@AntiMS The experimental Halium 12 build has two reports of succesfull VoLTE - both originating and receiving (non US), and several one way only calls with or without audio. I personally have tried it with all three US networks. Verizon has trouble, but with both T-Mobile and AT&T networks you can receive calls with audio in both directions. However, making a call fails and the dialer hangs. Logs were sent to the porter, and it is suspected that this is an ipv6 vs ipv4 issue.

We can help you more efficiently if you join the ubports NA Issues Telegram channel.

@AntiMS Boot into UT recovery. Enable adb, then either flash with the Google web recovery installer, or manually with whichever Google factory image you desire.

@UT-downunder

https://forums.ubports.com/post/95693

@UT-downunder Windows, yes. Linux users have gotten it to work either using a VM (requires a VM with USB port pass through. Some work, some don't), or by installing Windows to Go on a USB drive. Alternatively, there is a way to do it in linux somewhere in the ubPorts OP6 forum, but I haven't used it in years (I use Windows To Go on a USB SSD-Transend thumb drive SSD). Or just borrow someone's machine for a few.

@UT-downunder Replied to your other post - Flash the global build on the devices page with msmDownloadtool, then unlock again.

@UT-downunder It's already unlocked. But, if this is not the global build specified on the devices page, you should flash that with EDL mode and MSMdownloadtool (which is included in the build). Then unlock again.

@tidip https://t.me/ubports_op6

@tidip

https://forums.ubports.com/post/80091

You can also use the msmDownloadTool to completely reset everything, if you suspect you had a bad flash at some point. See the forum, same category as the above link.

@RandomUser Better yet, make a donation to the developer https://www.paypal.me/rubencarneiro