I tried this on my Pro5 rc channel with Nokia J headset - without high quality audio mode. The headset finally has call audio and both speaker and microphone work but there is so much noise that it makes it unusable. I sent you the logs.

Needless to say, a very big thank you for all your work!!! I am amazed that this is finally going somewhere... I was waiting this moment for maybe 4 years...

@arubislander Well, I just disable anbox after checking my whats app so that the battery would not drain. And I don't have notifications from whats app. I cannot see videos or gifs. So for texts and images is great. Oh, I cannot open links or copy paste from whats app to UT.

I am also interested in this. Maybe this could be added like a customization of shortcuts... like in a desktop OS - since not all the phones have the same physical buttons.

I just want to thank @DanChapman for the great work on Dekko! I am so glad that he started again the work on the click package - we need it very much!

Regarding a confirmation dialog for deleting a message I just wanted to share that I am very pleased with the current behavior without a confirmation dialog but it displays an undo button. So, in order to please everybody, maybe there could be a switch in setting whether to ask for confirmation or not before deleting a message.

Thank you again.

I subscribe to every post where a see a glide / swipe type of keyboard mentioned

I made it work... According to https://bileto.ubuntu.com/#/ticket/2162, I changed the line from /{,var/}run/aethercast/dhclient*.leases lrw, to /run/aethercast/dhclient*.leases lrw, and then voila! Thank you @Ingo for pointing me into the right direction.

@tricky In my very poor understanding, somehow the anbox-tool does not reflect the state of the android container. So, the android apps can still work even though anbox-tool status says that is not running. For me, the true way to find if the android container is not running is to try to login into it with sudo lxc-console -ndefault -P /home/phablet/anbox-data/containers -t0 - when it's running I can login and when it's not then it says so. Why would I need that? - because if an android app does not start then I need to find if it's because of the android container not running, in which case I don't know how to start it except by a reboot of the phone

Maybe @mariogrip could help us with the command to start the android container?

I cannot read this post without thanking to all that contributed, I am even more pleased with the way my phone (OP5T) works now, everything is smooth, huge improvement in fingerprint reader, really thank you, thank you, thank you!

Thank you so much everybody for helping and guiding me in the right direction!

It turns out it was a wrong setting in the APN: it was "internet" but it should have been "broadband". I got the correct settings from https://apn.how/romania/telekom-ro

Now I have data roaming. Thanks again!

@happyzenith I use night clock app at night and that turns off the notifications led on my Pro 5.

@arubislander Thank you.

So, for English (United States), the AM/PM at the end of the displayed time it helps with the rounded corner of the display.

Just add AM/PM at the end of the time format...

Oups... Actually, looking into setting I realise I don't know how to set the time format. But on my phone it is the AM/PM that is clipped, not the minutes.

On my N100 I don't have /sys/class/power_supply/battery/charging_enabled but instead I have /sys/class/power_supply/battery/battery_charging_enabled

I also experiment with this: https://forums.ubports.com/topic/10672/range-for-manually-adjusting-brightness/6

• so what I noticed on my phone (Oneplus N100) is that it stays on the dimmed brightness until a notification comes (like for an email) - that is why, when I use the dimmed brightness, which is during the whole night - I switch wifi and data off so that it would stay dimmed the whole night - and it does stay indeed.

Thank you both, I found it: echo 10 > /sys/devices/platform/soc/5e00000.qcom,mdss_mdp/backlight/panel0-backlight/brightness - this is how I can manually change the brightness...

Next I'll see if I can modify somewhere the minimum value that the slider can adjust so that I will use the slider in the brightness menu and not the command line.

@paulcarroty Allright, I see /sys/devices/platform/soc/4784000.sdhci/leds/mmc0\:\:/brightness and it has the value of 0. If I change its value to let's say 100, there's no change on the device's brightness though...

What else could I try?

Thank you!

Is there any way to manually adjust brightness to an even lower value than the minimum brightness achieved when moving the slider in the top menu to its most left position?

• maybe from command line?
• or maybe the minimum that can be achieved by moving the slider can be edited somewhere to be set to an even lower value?

Thank you for any input!

Context: I keep my phone unlocked during the night in order to display the time but the screen backlight bleed bothers me.

You know what? - just before uninstalling it I checked it again and, upon activation, it worked! Maybe meanwhile I restarted the phone but I'm sure I restarted it before and it didn't help... Anyway, I'm very glad it works now! Thank you!

On my Oneplus N100 the BatterySaver is always stopped - if I switch it on, it continues to say "Stopped". If I close the program and I restart it, it continues to say "Stopped" and the switch is off. I attached the logs.

Does it work for anybody else on the N100? - it used to work on my Oneplus 5T.

[12/13/24 3:40 PM] library "eglSubDriverAndroid.so" not found
[12/13/24 3:40 PM] library "libadreno_app_profiles.so" not found
[12/13/24 3:40 PM] Creating a QMirClientScreen now
[12/13/24 3:40 PM] Got library name:  "/usr/lib/aarch64-linux-gnu/qt5/qml/io/thp/pyotherside/libpyothersideplugin.so"
[12/13/24 3:40 PM] qml: model: []
[12/13/24 3:40 PM] qml: ofonoManager [/ril_0,/ril_1]
[12/13/24 3:40 PM] qml: modem1: /ril_0
[12/13/24 3:40 PM] qml: modem2: /ril_1
[12/13/24 3:40 PM] qml: module main imported
[12/13/24 3:40 PM] qml: init returned false
[12/13/24 3:40 PM] qml: model: [2G only (gsm),2G/3G (umts),2G/3G/4G (lte)]
[12/13/24 3:40 PM] qml: techs: [gsm,umts,lte]
[12/13/24 3:40 PM] [PERFORMANCE]: Last frame took 49 ms to render.
[12/13/24 3:41 PM] qml: config set to: /ril_0 gsm lte false
[12/13/24 3:41 PM] Failed to disable unit: Unit file batterysaver.service does not exist.
[12/13/24 3:41 PM] Failed to enable unit: Unit file batterysaver.service does not exist.
[12/13/24 3:41 PM] qml: start returned false
[12/13/24 3:41 PM] QObject::startTimer: Timers cannot be started from another thread

This is what I did and I have now a working device! Thank you for the push