@doniks I tried with my BQ E4.5 in Factory Mode and it reveals 3 fixed FM Stations: 88 MHz, 98,7 MHz and 108 MHz. I could listen to them. So for the BQ E4.5 on the hardware side everything is there, what is missing is a App/Software.

Hi,

I have seen many request to have CalDav/Carddav, is this already working in the OTA-1?

thanks very much

@Lakota You could use OwnCloud/Nextcloud; see https://owncloud.org/ or https://nextcloud.com/

Raised Percent : 103.15%

the link to the issue: https://github.com/ubports/address-book-app/issues/56

Hi,

extend VPN: Currently it only supports OpenVPN, but I would like to have vpnc aka Cisco Systems VPN Client included.

Thanks a lot!

Hi,

for Android there is a utility called: Vysor that allows for sharing the smartphone screen on a Desktop. It exists as a Chrome extension or a standalone app.
Is there something similar for UBports? Using a BQ E4.5 device.

thanks a lot.

@Lakota Thanks a lot:
So it needs 2 things:

• Install Today Scope from Ubuntu Store
• Install click package from Github repo https://github.com/mharrend/ubuntu-touch-day-scope using this command:
  pkcon install-local --allow-untrusted Downloads/com.canonical.scopes.day_1.5.2_armhf.click
• Reboot phone
• Add Today Scope by pulling in Apps Window the Window on top, locate Today, enable and drag to the top of the Scope list.

@jsnjhn Hi, I am not using ProtonVPN, but take a look here: https://protonvpn.com/support/linux-vpn-setup/

@wgarcia

1. If I open uTorch LED doesn't work, but if I open the System Setting: Security & Privacy -> App permissions (Camera is greyed out), the LED comes ON and I can switch the light on and off.
2. Not tested, because no SIM card
3. The first time I used the N5 at home it could not find the Wifi network, only after I set the Channel from automatic to a single channel, the N5 could see the SSID; next I switched back to automatic channel and N5 worked without problems.
   Seems there is something odd with Wifi using N5.

@applee It is not about downloading the system image, but the "simple" process of changing channel say from RC to Stable or vice versa. It says Fetching channels, the circle rotates and after 3 minutes I get the following on the screen:
< Channels settings
Channel to get updates from:

underneath all empty, no selection

Hi,

Nexus 5 on RC; whenever I want to change channel settings it takes a very long time, sometimes it does not even work. There are 4 channels: development,edge,Release candidate and Stable. Why the different writing style?

Why is it so slow changing them?

In the /var/log/syslog I get those entries, while connected via mobile data (LTE):

Jun 29 09:45:20 ubuntu-phablet kernel: [208541.183815] netlink: 12 bytes leftover after parsing attributes.
Jun 29 09:45:20 ubuntu-phablet kernel: [208541.183828] netlink: 12 bytes leftover after parsing attributes.
Jun 29 09:45:20 ubuntu-phablet kernel: [208541.183918] netlink: 12 bytes leftover after parsing attributes.
Jun 29 09:45:20 ubuntu-phablet kernel: [208541.184005] netlink: 12 bytes leftover after parsing attributes.
Jun 29 09:45:20 ubuntu-phablet kernel: [208541.184090] netlink: 12 bytes leftover after parsing attributes.
Jun 29 09:45:20 ubuntu-phablet kernel: [208541.184174] netlink: 12 bytes leftover after parsing attributes.
Jun 29 09:45:20 ubuntu-phablet kernel: [208541.184255] [rev_rmnet0] error: rmnet_ioct called for unsupported cmd[35591]
Jun 29 09:45:20 ubuntu-phablet kernel: [208541.184333] [rev_rmnet1] error: rmnet_ioct called for unsupported cmd[35591]
Jun 29 09:45:20 ubuntu-phablet kernel: [208541.184509] [rev_rmnet2] error: rmnet_ioct called for unsupported cmd[35591]

Thanks for your answers!

@moem I made the change https://translate.ubports.com/translate/ubports/dialer-app/en_GB/?q=
I need this for 2FA!!!

@cela Hi, do you have a link to for purchasing such devices? thanks a lot!

Hi, BQ E4.5 I ran ls -l in / and go this, see
Is this normal, that 4 links (red) are dead?

thanks a lot

Hi,

I discovered this error: Cannot add VPN configuration on Nexus 5 rc! Is this a known issue?

I have an N5 with Ubports OTA11 RC, how can I test it?
thanks

the link to the issue: https://github.com/ubports/address-book-app/issues/56

@cherrie See also this here: http://sturmflut.github.io/ubuntu/bq/2015/05/04/hacking-the-bq-part-2-factory-mode/

@doniks I tried with my BQ E4.5 in Factory Mode and it reveals 3 fixed FM Stations: 88 MHz, 98,7 MHz and 108 MHz. I could listen to them. So for the BQ E4.5 on the hardware side everything is there, what is missing is a App/Software.