Ubuntu Touch Programming Course

wdehoog · 11 Nov 2017, 12:15

Yes it is 'connected' (otherwise there would be no device). I did not see any warning on the phone's display. It is no issue since I have setup ssh access. I was just being curious.

mimecar · 11 Nov 2017, 12:44

Check in the hidden folders of your computer user if you have one related to ADB. There may be some previous configuration and therefore the computer is not requesting the connection.

mimecar · 4 Apr 2018, 09:17

@HendriXXX, I think I've got it.

The steps are:

sudo add-apt-repository ppa:ubuntu-lxc/lxd-stable
sudo apt-get update
sudo apt-get upgrade && sudo apt-get dist-upgrade

Reboot the computer

sudo lxd init

Do you want to configure a new storage pool (yes/no) [default=yes]?
Name of the new storage pool [default=default]:
Name of the storage backend to use (dir, lvm, zfs) [default=zfs]:
Create a new ZFS pool (yes/no) [default=yes]?
Would you like to use an existing block device (yes/no) [default=no]?
Size in GB of the new loop device (1GB minimum) [default=15GB]:
Would you like LXD to be available over the network (yes/no) [default=no]?
Would you like stale cached images to be updated automatically (yes/no) [default=yes]?
Would you like to create a new network bridge (yes/no) [default=yes]? no

LXD has been successfully configured.

Launch IDE with:

ubuntu-sdk-ide

Configure the kits and restart ubuntu-sdk-ide. A message will appear indicating that the container is faulty. Accept to correct them. After this step it will work fine. I was able to run an example application on the computer and the M10 FHD with these steps.

mimecar · 12 Nov 2017, 16:06

A question related to the course. Are your applications working well with UBports firmware (I still have Canonical firmware)? Are there any errors other than those related to LXD and Ubuntu 16.04?

fulvio · 13 Nov 2017, 10:35

Hi @mimecar,
i have successfully installed UBports on my tablet BQ M10 FHD removing Canonical version using UBports installer. Currently i don't have problems about applications running and development (using Ubuntu SDK).
I have installed on UBports an old application (QML + js) that i have made for Canonical version and works well.
I'm using Ubuntu SDK and emulator and i don't have problems (i have installed it some time ago). For example i can connect my tablet (running UBports version) with the PC ( running ubuntu 16.04 LTS) and i can run applications from Ubuntu SDK to test them, like previously with the Canonical version.
I have made i couple of new applications (QML + js), packaged as .click with Ubuntu SDK, deployed on OpenStore and successfully installed on my Tablet (and other people have downloaded them). I can't provide info about Scope and applications made with languages different from QML and javascript.
If you mean specific tests or info tell me.
My tablet run UBPorts 15.04 (r9) availabe on Ubports RC channel.

HendriXXX · 13 Nov 2017, 11:08

Thanks @mimecar, I tried your install steps, but it still didn't work.

BUT
I managed to find actual cause of the problem.. it was permission problem. "unix.socket" file was owned by root. So I changed file ownership to lxd and it works.

sami@acer1:~$ ls -la /var/lib/lxd/unix.socket
srw-rw---- 1 root root 0 marra 13 12:37 /var/lib/lxd/unix.socket
sami@acer1:~$ sudo chown lxd:lxd /var/lib/lxd/unix.socket
sami@acer1:~$ ls -la /var/lib/lxd/unix.socket
srw-rw---- 1 lxd lxd 0 marra 13 12:37 /var/lib/lxd/unix.socket

Hope this helps if someone else has same problem someday..

mimecar · 19 Nov 2017, 12:12

Thank you for answering @fulvio. I hope to move on to UBports firmware today.

@HendriXXX , I will add your answer to the course. Thank you for sharing the solution.

The Telegram group link of the course is now fixed (previously expired from time to time).

mimecar · 9 Dec 2017, 17:46

Good afternoon

I just published the December course chapter. In this issue, @fulvio 's example application continues. Based on the temperature recorder, the possibility of displaying temperatures on a graph is added.

The concepts are more advanced than those seen in the normal course. For this reason, it is necessary to have a solid base of QML, JavaScript and SQLite. If you have any questions you can ask in the forum.

I was planning to publish more content. There is a translation that I have to revise and publish, but for reasons of time I will publish it in January. There are some surprises in the inkwell, but at the moment I won't give any more details.

mimecar · 1 Jun 2018, 13:04

Good afternoon.

I've posted a new course block. While the previous blocks worked with the Ubuntu Touch SDK, native applications will be programmed in this block on the desktop. There is also a new application that I hope you will be interested in programming.
https://mimecar.gitbooks.io/ubuntu-touch-programming-course/content/en/chapter-06.html

This month I hope to publish more content I have pending. I will inform you about the news in this forum thread.
https://www.gitbook.com/book/mimecar/ubuntu-touch-programming-course/details

Nithin · 3 Feb 2018, 15:20

I am trying to follow the tutorial here and managed to install the new Ubuntu Sdk. When I run or build the app i get the following messages

in Issues> error: There was a error in the device detection of desktop, no IP address was returned.
in application output> Application failed to start: No private key file given.

Couldnt find the solution anywhere to this. Does anyone know what is happening here.

mimecar · 4 Feb 2018, 17:23

Hi @Nithin,

On the Devices tab, have you configured the ports and the SSH connection?

Nithin · 6 Feb 2018, 19:57

HI mimecar, Thanks a lot for the help. I am running Kubuntu, and not Ubuntu. Should that be a problem?
This is how my devices tab looks like

Also this

mimecar · 6 Feb 2018, 21:01

@nithin, Have you done all the steps in the "Running the Application on a Real Device" section?
https://mimecar.gitbooks.io/ubuntu-touch-programming-course/content/en/chapter-02.html

On the screen of Ubuntu devices you should get your phone.

Nithin · 2 Jul 2018, 12:57

Not yet I was still trying to run it on my desktop. When that didn't work i didn't try running it on my Phone. The "Running on your device" section comes after that.

Nithin · 2 Jul 2018, 19:57

Tried running it on the device. after activating developer mode, the SSH notification doesn't appear at all. Also i tried installing Ubuntu sdk again. At the step

sudo apt-get install ubuntu-sdk

i get the following error

The following packages have unmet dependencies:
ubuntu-sdk : Depends: ubuntu-sdk-libs-dev but it is not going to be installed
E: Unable to correct problems, you have held broken packages.

Nithin · 10 Feb 2018, 21:42

Assuming Kubuntu being a possible cause for the problem, I decided to try it out on Kde Neon and Ubuntu. Kde Neon again seemed to have the same problem of not wanting to install dependencies. So then I Installed Ubuntu and tried the same on it. only to encounter some other errors, here are a few ones.

during

sudo lxd init
in the question on default storage back-end to use, Ubuntu wouldn't take zfs for an option for some reason.
so had to then use the command
sudo add-apt-repository ppa:ubuntu-lxc/lxd-stable
this doesnt work either. instead one has to use
sudo add-apt-repository ppa:ubuntu-lxc/stable

After this there was no zfs option available at all.
so had to use this

sudo apt install -t xenial-backports lxd lxd-client

after all of this i am back to the same problem which i faced in the first step.

I am trying to follow the tutorial here and managed to install the new Ubuntu Sdk. When I run or build the app i get the following messages

in Issues> error: There was a error in the device detection of desktop, no IP address was returned.
in application output> Application failed to start: No private key file given.

As a last step will try compiling the clock app as mentioned in the Readme.Developers.

mimecar · 11 Mar 2018, 13:12

Good evening.

I have uploaded the translation of the chapter "Formatting label and events". I'll upload the source code next week. I have another collaboration from Fulvio pending and I hope to upload it next week.
https://mimecar.gitbooks.io/ubuntu-touch-programming-course/content/en/chapter-04-s03.html

Talkless · 15 Mar 2018, 19:20

@nithin said in Ubuntu Touch Programming Course:

After this there was no zfs option available at all.
so had to use this

sudo apt install -t xenial-backports lxd lxd-client

Thanks! Using lxd from xenial-backports helped to overcome that Creating the bridge failed with: not implemented issue.

It would be nice to have this hint in Course.

Pulsar33 · 15 Mar 2018, 20:13

@mimecar : following you.
Thanks for your work !
Pulsar33

Pulsar33 · 4 Apr 2018, 07:37

@tischlerwilly @mimecar : Error No Storage Pool Found
As said by tischlerwilly, I have the same error when installing the developper kits :

~~I'm also using MINT 18(.3) 64bits. Did you find the solution, please ?~~
Best regards
Pulsar33

Oooops ! See below ...